Evaluation Board for the LMP7721 (Remove from store page per Teresa)

Description:

The LMP7721 Evaluation Board provides a platform to test the input bias current and performance of the LMP7721 amplifier. The LMP7721 amplifier is optimized for ultra low input bias current, 3 fA typical, by using on chip guard drivers and a package pin out to isolate the amplifier's inputs from its power supply and output pins. *To allow customization of the circuit to best accommodate your particular application, certain components (R1-R7, J2) are not populated on this board. This allows flexible configuration of the amplifier circuit (i.e. inverting, non-inverting), as well as the gain setting of the circuit.

Note: The triax connector (J2) on this board is not included. Suggested connector is Trompeter part# CBJR70A

Contents:

• LMP7721 Assembled* Evaluation Board
• LMP7721 Datasheet
• AN-1796: Application Note 1796 LMP7721 Evaluation Board

• AN-1796 - Application Note 1796 LMP7721 Evaluation Board
• AN-1798 - Application Note 1798 Designing with Electro-Chemical Sensors
• AN-1852 - Application Note 1852 Designing With pH Electrodes