COP8FLASH Reference Designs
For more info on COP8-REF-AM Reference Design and Realtime Target Board for the COP8AME/ANE FLASH Family of Flash Microcontrollers with 8K Memory, Virtual EEPROM, A/D, Temp Sensor, and Dual Op Amps.
Summary:
A 7-sensor (light, humidity, pressure, temp, voltage, current, A/D), multi-meter hardware demo design for our COP8A FLASH family of microcontrollers. Realtime hardware environment, with a variety of I/O and functions for demonstrating the capabilities and features of the COP8AM/N Flash devices. Run the application as a stand-alone multi-meter demo with LCD display, or with Windows control software. The Windows control program communicates with the PCB via an RS232 connection.
The PCB also can be used as a realtime target development board for your applications. Onboard connectors support COP8Flash Emulators (for full-featured, realtime debugging), our NiceMon Debugger Utility (for low-cost single-step debugging), and the Kanda COP8-ISP programming tool.
The kit consists of a printed circuit board (PCB) with a pre-programmed and socketed 28pin DIP COP8AME9, Liquid Crystal Display, and multiple Input Interfaces. In the package we have enclosed the necessary documentation such as schematics, bill of materials, flow charts and assembler code.
Minimum Requirements:
- Windows OS;
- 5mb minimum on disk;
- RS232 port;
- CD ROM Drive
Box contains:
- Fully assembled PCB (Size & Weight: 3 ' x 4 '; 8 oz)
- COP8-REF-AM Support CD, with software and documentation.
- National's Development CD ROM.
|
