48-bit Channel Link Serializer / Deserializer Evaluation Board 112MHz
DS90CR481 Product Folder
DS90CR482 Product Folder
DS90CR483A Product Folder
DS90CR484A Product Folder Description:
This Channel Link demo kit contains a transmitter (Tx) demo board and a receiver (Rx) demo board along with an interface cable. This kit will demonstrate the chipsets transmitting data streams using Low Voltage Differential Signaling (LVDS) through a cable at seven times the input clock rate.
The transmitter board accepts 3V TTL/CMOS data signals from an incoming data source along with the clock signal. The LVDS transmitter converts the TTL/CMOS parallel lines into serialized LVDS pairs. The serial data streams toggle at 7 times the clock speed.
The receiver board accepts the LVDS serialized data (and clock) and converts them back into parallel 3V TTL/CMOS data out signals.
Contents:
- One Transmitter board with IDC connectors on Tx input DS90CR483MTD - 48 bit Transmitter
- One Receiver board with IDC connectors on Rx output DS90CR484MTD - 48 bit Receiver
- One 2-meter 3M MDR LVDS Cable interface to connect TxOUT to RxIN. Note: The MDR footprint has been set to accept a D26-1 pinout.
- Demonstration Kit Documentation
- DS90CR483A/DS90CR484A Datasheet
What the user needs to provide:
- 3.3V supply
- Equipment to transmit for 48 parallel LVCMOS bits + 1 Tx clock
- For BERT, receiver for 48 parallel LVCMOS data + 1 Rx clock
|
