RD-147 - Low IF Receiver Reference Design Board

Design Description


The ADC14DS105KARB is a low IF receiver subsystem reference design board that utilizes a pair of LMH6552 differential drivers and a dual ADC to enable immediate evaluation of a quadrature direct conversion or near-zero IF receiver for signal frequencies from DC to 40 MHz. This receiver architecture is commonly used in WiMAX and WCDMA receiver systems. The 1 GHz input bandwidth of the ADC and the 1.5 GHz differential amplifier gain stage enable large signal-tonoise ratio (SNR) of 73.3 decibels full scale (dBFS) and spurious free dynamic range (SFDR) greater than 85 dBFS for input signals up to 40 MHz. In addition to the LMH6552, the board includes National's ADC14DS105 dual 14-bit, 105 mega-sample per second (MSPS) low-distortion, low-noise ADC with serialized low-voltage differential signaling (LVDS) outputs; LMK02000 low-jitter clock conditioner; as well as several energy-efficient power management integrated circuits (ICs).

  Design Resources

  RD-147 Reference Design Document
 Design Files (Schematic, Board Layout, Gerber, and BOM)

Additional Resources


LMH6552 Product Folder
ADC14DS105 Product Folder
LMK02000 Product Folder

Board Photo


RD-147 Board Photo
  Features

Key Features of the ADC14DS105KARB Low IF Receiver Reference Design Board

  • Enables immediate evaluation of a quadrature direct conversion or near-zero IF receiver subsystem architecture
  • Demonstrates a receiver architecture commonly used in WiMAX and WCDMA receiver systems
  • Configured for signal frequencies from DC to 40 MHz
  • Featured Products include:
    • LMH6552 1.5 GHz differential current feedback amplifiers from National Semiconductor's Powerwise® family
    • ADC14DS105: 14-bit, 105 MSPS, 1 GHz input bandwidth dual channel ADC with serial LVDS outputs from National Semiconductor's Powerwise® family
    • LMK02000: low-jitter clock conditioner from National Semiconductor's Powerwise® family provides 128 fs jitter (100 Hz to 20 MHz integration bandwidth)
    • Several energy-efficient power management integrated circuits (ICs) from National Semiconductor
  • Reference design performance for input signals up to 40 MHz:
    • Small-signal SNR of 74 dBFS and SFDR greater than 90 dBFS
    • Large-signal SNR of 73.3 dBFS and SFDR greater than 85 dBFS

Purchasing Information


The ADC14DS105KARB/NOPB Reference Design board can be purchased directly from National