National Semiconductor | High-performance Analog

 

 SCAN12100   

1228.8 and 614.4 Mbps CPRI SerDes with Auto RE Sync and Precision Delay Calibration Measurement
Click link to Download

Features

  • Exceeds LV and HV CPRI voltage and jitter requirements
  • 1228.8, and 614.4 Mbps operation
  • Pin and package compatibility with the SCAN25100
  • Integrated delay calibration measurement (DCM) directly measures T14 and Toffset delays to ± 800 ps
  • DCM also measures chip and other delays to ± 1200 ps accuracy
  • Deterministic chip latency
  • Independent transmit and receive PLLs for seamless RE synchronization
  • Low noise recovered clock output
  • Requires no jitter cleaning in single-hop applications
  • >8 kV ESD on the CML IO, >7 kV on all other pins, >2 kV CDM
  • Hot plug protection
  • LOS, LOF, 8b/10b line code violation, comma, and receiver PLL lock reporting
  • Programmable hyperframe length and start of hyperframe character
  • Programmable transmit de-emphasis and receive equalization with on-chip termination
  • Advanced testability features
  • IEEE 1149.1 and 1149.6
  • At-speed BIST pattern generator/verifier
  • Multiple loopback modes
  • 1.8V or 3.3V compatible parallel bus interface
  • 100-pin TQFP package with exposed dap
  • Industrial –40 to +85° C temperature range
  • Description

    The SCAN12100 is a 1228.8 and 614.4 Mbps serializer/deseralizer (SerDes) for high-speed bidirectional serial data transmission over FR-4 printed circuit board backplanes, balanced cables, and optical fiber. The SCAN12100 integrates precision delay calibration measurement (DCM) circuitry that measures link delay components to better than ± 800 ps accuracy.

    The SCAN12100 features independent transmit and receive PLLs, on-chip oscillator, and intelligent clock management circuitry to automatically perform remote radio head synchronization and reduce the cost and complexity of external clock networks.

    The SCAN12100 is programmable though an MDIO interface as well as through pins, featuring configurable transmitter de-emphasis, receiver equalization, speed rate selection, internal pattern generation/verification, and loop back modes. In addition to at-speed BIST, the SCAN12100 includes IEEE 1149.1 and 1149.6 testability.

    Also Recommended
    SCAN251002457.6, 1228.8, And 614.4 Mbps CPRI SerDes

    Parameters / ValuesSCAN12100 SCAN25100
    FunctionCPRI SerDes CPRI SerDes
    Total Throughput1228.8 Mbps 2457.6 Mbps
    Payload/Channel1228.8 Mbps 2457.6 Mbps
    Signal ConditioningEqualizer, De-Emphasis Equalizer, De-Emphasis
    Clock Min30.72 MHz 30.72 MHz
    Clock Max61.44 MHz 122.88 MHz
    StandardCPRI CPRI
    Power Consumption_1110 mW 1230 mW
    Other Supply1.8 1.8
    SupplyVoltage3.3 Volt 3.3 Volt
    Special FeaturesDelay Calibration Delay Calibration
    Eval KitSCAN25100EVK SCAN25100EVK
    ESD8 kV 8 kV
    Temperature Min-40 deg C -40 deg C
    Temperature Max85 deg C 85 deg C
    Compression Ratio10:1 10:1
    Parallel Bus Width8 bits 8 bits
    Number Transmitters1 1
    Number Receivers1 1
    JTAG1149.1Yes Yes
    CommunicationsYes Yes
    Sensing & ImagingYes Yes

    Datasheets
    TitleSizeDateOther
    Language
    SCAN12100 1228.8 and 614.4 Mbps CPRI SerDes with Auto RE Sync and Precision Delay Calibration Measurement702
    Kbytes
    19-May-08   


    Application Notes
    TitleSizeDateOther
    Language
    AN-1463: Application Note 1463 Design and Layout Guidelines for SCAN251002815
    Kbytes
    21-Oct-09 

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    SCAN12100TYA/NOPB

    SCAN12100TYA

    RoHS Status


    TQFP EXP PAD
    Full production
    Lead Time: 16 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $9.00 each at 1K+ pcstray
    of
    90

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for SCAN12100.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for SCAN12100 is located at RoHS Status.

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    SCAN12100TYA/NOPB

    SCAN12100TYA
    508.381
    510.011
    TQFP EXP PAD1003
    3
    260
    260
    DetailDownload
    ibis file
    NSUZXYYTTE#
    SCAN12100TYA

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for SCAN12100.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for SCAN12100 is located at RoHS Status.

    Design Tools
    TitleSizeDate
    8B/10B CPRI Basestation SERDES Evaluation Board  

    CAD Symbols and Models
    Download SCAN12100 CAD Symbols
     Models

    ibis file


    [Information as of 8-Feb-2012]