National Semiconductor | High-performance Analog

 

 LP5522   

Programmable LED Driver from the PowerWise® Family
Click link to Download

Features

  • Programmable blinking sequence
  • 1 to 3 programmable pulses
  • 1 ms to 255 ms LED on time
  • 10 ms to 2500 ms LED off time
  • Single or continuous run of programmed blinking sequence
  • Constant current high side output driver
  • Adjustable current with external resistor
  • 0.2 uA typical shutdown current
  • Autonomous operation without external clock
  • Micro SMD-6 package with 0.4 mm pitch:
    1.215 mm x 0.815 mm x 0.6 mm (LxWxH)
  • Description

    The LP5522 is a simple single wire programmable LED controller in six bump micro SMD package. It provides constant current flow through high side driver. Output current can be set from 1 mA to 20 mA by using an external resistor on the ISET pin. If no external resistor is used, output current is set to 5 mA default current. The LP5522 is controlled using only one signal. The signal controls either directly the LED driver or it launches previously programmed blinking sequence.

    The LP5522 works autonomously without a clock signal from the master device. Very low LED driver headroom voltage makes possible to use supply voltages close to LED forward voltage. Current consumption of the LP5522 is minimized when LED is turned off and once controller is disabled all supporting functions are also shut down. Very small micro SMD package together with minimum number of external components is a best fit for handheld devices.


    Applications

  • Indicator lights
  • Phone cosmetics
  • Toys



  • Typical Application
    *click for larger image


    Block Diagram
    *click for larger image



    Typical Performance
    click for larger image


     

    ParametersValues
    Regulated LEDs 1
    Total LED Current 20 mA
    PowerWise Technology Programmable Stored Blinking Sequence
    Supply Current 0.04 mA
    Input Min Voltage 2.7 Volt
    Input Max Voltage 5.5 Volt
    PWM BrightCtrl Yes
    Analog-V BrightCtrl No
    Ambient Light Compensation No
    RGB-LED No
    Temperature Min -30 deg C
    Temperature Max 85 deg C
    Automotive Yes
    PowerWise Yes

    Datasheets
    TitleSizeDateOther
    Language
    LP5522 Programmable LED Driver255
    Kbytes
    13-Jun-07   


    Application Notes
    TitleSizeDateOther
    Language
    AN-1636: Application Note 1636 LP5522 Evaluation Kit1568
    Kbytes
    13-Jun-07 中文


    Other Technical Documents
    TitleTypeDate
    Color-Management LED Drivers Have a Bright FuturePower Designer 2007-06-20

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LP5522TM/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    DIGI-KEYWorldwide535
    FARNELLEurope and Asia749
    MOUSERWorldwide750
    NEWARKAmericas749
    RS COMPONENTSWorldwide110
    $0.45 each at 1K+ pcsreel
    of
    250
    LP5522TMX/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $0.45 each at 1K+ pcsreel
    of
    3000

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LP5522.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LP5522 is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LP5522TMEV
    Programmable LED Driver from the PowerWise® FamilyFull production


     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $80.00 each1

    Description:

    The LP5522 is a simple single wire programmable LED controller in six bump micro SMD package. It provides constant current flow through high side driver. Output current can be set from 1mA to 20mA by using an external resistor on the ISET pin. If no external resistor is used, output current is set to 5mA default current. The LP5522 is controlled using only one signal. The signal controls either directly the LED driver or it launches previously programmed blinking sequence.

    The LP5522 works autonomously without a clock signal from the master device. Very low LED driver headroom voltage makes possible to use supply voltages close to LED forward voltage. Current consumption of the LP5522 is minimized when LED is turned off and once controller is disabled all supporting functions are also shut down. Very small micro SMD package together with minimum number of external components is a best fit for handheld devices.

    Evaluation Kit Overview:

    The LP5522 Evaluation Kit is based on a modular system, where the actual evaluation board is plugged on top of the PC interface board. The interface operates through the USB port. The kit supports complete functional evaluation of the circuit.

    Contents:

    • LP5522 evaluation board
    • USB interface board
    • USB interface cable
    • CD-ROM including:
           • Evaluation software
           • LP5522 datasheet
           • Evaluation kit document



    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    LP5522TM/NOPB

    1.337
    MICRO SMD61260DetailN/AN/A
    XV
    I 6
    LP5522TMX/NOPB

    1.337
    MICRO SMD61260DetailN/AN/A
    XV
    I 6

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LP5522.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LP5522 is located at RoHS Status.

    CAD Symbols and Models
    N/A
     Models
    N/A


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    LP5522TMCMOS70213010015840003449464325
    LP5522TMXCMOS70213010015840003449464325

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LP5522.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LP5522 is located at RoHS Status.

    [Information as of 9-Feb-2012]