Features
| | Compatible with advanced applications processors requiring DVM (Dynamic Voltage Management) |
| | Three buck regulators for powering high current processor functions or I/O's |
| | 6 LDO's for powering RTC, peripherals, and I/O's |
| | Backup battery charger with automatic switch for lithium-manganese coin cell batteries and Super capacitors |
| | I
2C compatible high speed serial interface
|
| | Software control of regulator functions and settings |
| | Precision internal reference |
| | Thermal overload protection |
| | Current overload protection |
| | Tiny 40-pin 5x5 mm LLP package |
Key Specification
Buck Regulators
| | Programmable VOUT from 0.725 to 3.3V
|
| | Up to 95% efficiency |
| | Up to 1.6A output current |
| | ±3% output voltage accuracy |
LDO’s
| | Programmable VOUT of 1.0V–3.3V
|
| | ±3% output voltage accuracy |
| | 150/300/370 mA output currents |
| | LDO RTC 30 mA |
| | LDO 1 300 mA |
| | LDO 2 150 mA |
| | LDO 3 150 mA |
| | LDO 4 150 mA |
| | LDO 5 370 mA |
| | 100 mV (typ) dropout |
General Description
The LP3971 is a multi-function, programmable Power Management Unit, designed especially for advanced application processors.
The LP3971 is optimized for low power handheld applications and provides 6 low dropout, low noise linear regulators, three
DC/DC magnetic buck regulators, a back-up battery charger and two GPIO’s. More...
Applications
| | PDA phones |
| | Smart phones |
| | Personal Media Players |
| | Digital cameras |
| | Application processors |
| | Marvell PXA |
| | Freescale |
| | Samsung |
| |
Typical Application
*click for larger image
| Parameters | Values |
| Input Min Voltage |
2.7 Volt |
| Input Max Voltage |
5.5 Volt |
| Output Range |
LDOs: 1.0 to 3.3V; Bucks: 0.8 to 3.3V |
| Channels |
9 Channels |
| Dropout Voltage |
0.25 Volt |
| PowerWise Technology |
Dynamic Voltage Scaling |
| Feedback Tolerance |
3 % |
| Output1 VoutMin |
0.8 Volt |
| Output1 VoutMax |
3.3 Volt |
| Output1 IoutMax |
1600 mA |
| Output1 Topology |
Buck |
| Output2 VoutMin |
1 Volt |
| Output2 VoutMax |
3.3 Volt |
| Output2 IoutMax |
370 mA |
| Output2 Topology |
LDO |
| Output3 VoutMin |
1.8 |
| Output3 VoutMax |
3.3 Volt |
| Output3 IoutMax |
300 mA |
| Output3 Topology |
LDO |
| Output4 VoutMin |
1 Volt |
| Output4 VoutMax |
3.3 Volt |
| Output4 IoutMax |
150 mA |
| Output4 Topology |
LDO |
| Special Features |
3 buck regulators, 6 LDOs. See datasheet for specific output voltages, currents. |
| Topology |
Buck, LDO |
| Switching Frequency |
2000 kHz |
| Adj Switch Frequency |
No |
| Sync Pin |
Yes |
| RegType |
Power Management Unit |
| Step-Down |
Yes |
| Step-Up |
No |
| Inverting |
No |
| Flyback |
No |
| Adjustable Output |
Yes |
| Error Flag |
Yes |
| On/Off Pin |
Yes |
| Temperature Min |
-40 deg C |
| Temperature Max |
125 deg C |
| PowerWise |
Yes |
Typical Performance
*click for larger image
| |
Additional Resources
Design Tools
Application Notes

Block Diagram
*click for larger image
|