Datasheets
Application Notes
Other Technical Documents
Part Number(s)
(NSID) | Description | Availability | Current Reported Stock | Budgetary Pricing | Pack
Size |
|---|
LMZ14203DEMO/NOPB
| Simple Switcher® Power Module 42Vin, 3A Demonstration Board | Full production
Lead Free (RoHS)
|
| $15.00 each | 1 |
 The SIMPLE SWITCHER power module demonstration board is optimized for peak performance and small footprint. The output voltage and fast transient response can be adjusted by replacing the small passive components. The good thermal performance of the power modules is showcased using a 2-layer 1oz copper PCB.
Features
- Integrated shielded inductor (inside module)
- VIN = 6V to 42V
- Precision enable UVLO - 8V
- 3.3V output (output voltage is adjustable by changing 1 or 2 resistors)
- Operates at full load up to 80°C ambient at 12V input
- Efficiency
- Up to 92% (LMZ14203/LMZ12003)
- Thermal performance
- θJA = 20°C/W
- θJC = 1.9°C/W
- Uses 0603 passives on back side showcasing production ready layout
- 2.3 in. x 1.7 in. (5.8 cm x 4.3 cm) 2-layer PCB. Uses 1oz copper on top and bottom
Contents
- LMZ14203 4A SIMPLE SWITCHER® Power Module with 42V Maximum Input Voltage Demonstration Board (blue soldermask)
Other Resources
|
Part Number(s)
(NSID) | Description | Availability | Current Reported Stock | Budgetary Pricing | Pack
Size |
|---|
LMZ14203EVAL/NOPB
| Simple Switcher ® Power Module 42Vin, 3A Eval Board | Full production
Lead Free (RoHS)
|
| $24.00 each | 1 |
 The SIMPLE SWITCHER power module evaluation board is optimized for peak performance and increased flexibility. By incorporating additional ceramic and an aluminum filter capacitor, the power module EVAL board demonstrates the low output ripple, fast transient response, and low conducted and radiated EMI performance of the device. Adjusting the output voltage, optimizing the control loop circuitry, and fine-tuning the filter capacitance is ease, with convenient size and placement of the passive components on the board. Finally, the excellent thermal performance of the power modules is enhanced using a 4-layer 1oz copper PCB.
Features
- Integrated shielded inductor (inside module)
- VIN = 6V to 42V
- Precision enable UVLO - 8V
- 3.3V output (output voltage is adjustable by changing 1 or 2 resistors)
- Operates at full load up to 80°C ambient at 12V input
- Efficiency
- Up to 92% (LMZ14203/LMZ12003)
- Thermal performance
- θJA = 20°C/W
- θJC = 1.9°C/W
- Uses 0805 passives on front side for easy modification of values to match requirements
- 1.705 in. x 3.03 in. (5.8 cm x 5.8 cm) 4-layer 1oz copper PCB
Contents
- LMZ14203 3A SIMPLE SWITCHER® Power Module with 42V Maximum Input Voltage Evaluation Board
- Application Note 2024 for the LMZ14203 Evaluation Board
Other Resources
|
National Semiconductor follows the provisions of the Product Stewardship Guide for Customers
(
CSP-9-111C1)
and Banned Substances and Materials of Interest Specification
(
CSP-9-111S2)
for regulatory environmental compliance. Details may be found at:
www.national.com/en/packaging/greennopb.html.
Lead free products are RoHS compliant.
Lead Free product status is available through the search tool located
here
All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.
Moisture Sensitivity Level Data for LMZ14203.
A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.
National's certificate of product compliance for LMZ14203 is located at RoHS Status.
Reliability Metrics
| Part Number |
Process |
EFR Reject |
EFR Sample Size |
PPM |
LTA Rejects |
LTA Device Hours |
FITS |
MTTF (Hours) |
|
LMZ14203TZ-ADJ | ABCD150 | 0 | 42680 | 0 | 0 | 6394000 | 1 | 1814314958
|
|
LMZ14203TZE-ADJ | ABCD150 | 0 | 42680 | 0 | 0 | 6394000 | 1 | 1814314958
|
|
LMZ14203TZX-ADJ | ABCD150 | 0 | 42680 | 0 | 0 | 6394000 | 1 | 1814314958
|
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click
here.
All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.
Moisture Sensitivity Level Data for LMZ14203.
A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.
National's certificate of product compliance for LMZ14203 is located at RoHS Status.
LMZ10504
