LMP8100 - Programmable Gain Amplifier
Datasheet Packaging Samples & Pricing Eval. Boards Reliability Application Notes Knowledge Base

Features

Typical Values, TA = 25°C

  • Gain error (over temperature range)
  • LMP8100A

    0.03%

    LMP8100

    0.075%

    Gain range

    1 to 16 V/V in 1 V/V steps

    Programmable frequency compensation

    Input zero calibration switch

    Input offset voltage (max, LMP8100A)

    250 μV

    Input bias current

    0.1 pA

    Input noise voltage

    12 nV/ Hz

    Unity gain bandwidth

    33 MHz

    Slew rate

    12 V/μs

    Output current

    20 mA

    Supply voltage range

    2.7V to 5.5V

    Supply current

    5.3 mA

    Rail-to-Rail output swing

    V + −50 mV to V +50 mV

    General Description


    The LMP8100 programmable gain amplifier features an adjustable gain from 1 to 16 V/V in 1 V/V increments. More...


    Applications


    Industrial instrumentation
    Data acquisition systems
    Test equipment
    Scaling amplifier
    Gain control
    Sensor interface
      Typical Application
    click for larger image


    ParametersValues
    Gain Adjust Range 24 dB
    Signal Channel BW 25 MHz
    Supply Min 2.7 Volt
    Supply Max 5 Volt
    Gain Control Interface SPI-Microwire
    Slew Rate 12 Volts/usec
    Supply Current 5.5 mA
    PowerWise Rating 2 220 uA/MHz
    Output Current 20 mA
    Offset Voltage max, 25C 300 mV
    Max Input Bias Current 0.3 nA
    Voltage Noise 12 nV/root(Hz)
    Special Features Av x1 to x16; Shutdown
    Function VGA
    Temperature Min -40 deg C
    Temperature Max 125 deg C


    Typical Performance


    click for larger image


      Additional Resources
    Application Notes


    Block Diagram


    click for larger image



    Datasheet
    RoHS Compliance Information Size in KbytesDate Click link below to Download
    LMP8100 Programmable Gain Amplifier 1391
    Kbytes
    18-Apr-08 Download
    LMP8100 Programmable Gain Amplifier (Japanese)
    2355 Kbytes   Download

    If you have trouble printing or viewing PDF file(s), see Printing Problems.


    Package Availability, Models, Samples & Pricing
    Part NumberPackageFactory Lead TimeModelsSamples &
    Electronic
    Orders
    Budgetary PricingStd
    Pack
    Size
    Package
    Marking
    Format
    TypePinsSpec.MSL
    Rating
    Peak
    Reflow
    RoHS
    Report
    CAD
    Symbols
    WeeksQtyQty$US each
    LMP8100AEVALProgrammable Gain AmplifierFull productionN/A
     
    Buy Now
    1+$340.001-
    6 weeksN/A
    LMP8100AMASOIC NARROW14NOPB1260RoHS N/A Full productionN/A
    Samples
    Buy Now
    1K+$3.41rail
    of
    55
    NSUZXYTTE#
    LMP8100
    AMA
    6 weeks100
    LMP8100MASOIC NARROW14NOPB1260RoHS N/A Full productionN/A
    Samples
    Buy Now
    1K+$2.87rail
    of
    55
    NSUZXYTTE#
    LMP8100
    MA
    6 weeks500
    LMP8100AMAXSOIC NARROW14NOPB1260RoHS N/A Full productionN/A
     
    Buy Now
    1K+$3.41reel
    of
    2500
    NSUZXYTTE#
    LMP8100
    AMA
    8 weeksN/A
    LMP8100MAXSOIC NARROW14NOPB1260RoHS N/A Full productionN/A
     
    Buy Now
    1K+$2.87reel
    of
    2500
    NSUZXYTTE#
    LMP8100
    MA
    8 weeksN/A
    LMP8100MA-PCBEvaluation Board for the LMP8100MAFull productionN/A
     
    Buy Now
     CALLN/A-
    N/AN/A

    General Description


    The LMP8100 programmable gain amplifier features an adjustable gain from 1 to 16 V/V in 1 V/V increments. At the core of the LMP8100 is a precision, 33 MHz, CMOS input, rail-to-rail input/output operational amplifier with a typical open-loop gain of 110 dB. Amplifier closed-loop gain is set by an array of precision thin-film resistors. Amplifier control modes are programmed via a serial port that allows devices to be cascaded so that an array of LMP8100 amplifiers can be programmed by a single serial data stream. The control mode registers are double buffered to insure glitch-free transitions between programmed settings. The LMP8100 is part of the LMP precision amplifier family and is ideal for a variety of applications.

    The amplifier features several programmable controls including: gain; a power-conserving shutdown mode which can reduce current consumption to only 20 μA; an input zeroing switch which allows the output offset voltage to be measured to facilitate system calibration; and four levels of internal frequency compensation which can be set to maximize bandwidth at the different gain settings.

    The LMP8100 comes in a 14-Pin SOIC package.

    Reliability Metrics


    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    LMP8100AMAVIP50CLZ301755003150001289382110
    LMP8100AMAXVIP50CLZ301755003150001289382110
    LMP8100MAVIP50CLZ301755003150001289382110
    LMP8100MAXVIP50CLZ301755003150001289382110

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    Application Notes


    TitleSize in Kbytes Date Click link below to Download
    AN-1890: Application Note 1890 551600234 - LMP8100 Evaluation Board User Guide 996
    Kbytes
    8-Aug-08 Download
    AN-1890 (Chinese): Application Note 1890 551600234 - LMP8100 Evaluation Board User Guide
    279 Kbytes  

    If you have trouble printing or viewing PDF file(s), see Printing Problems.

    More Application Notes


    TitleSize in Kbytes Date Click link below to Download
    AN-1626: Application Note 1626 551013037 - LMP8100 Evaluation Board User Guide 344
    Kbytes
    16-Oct-08 Download
    AN-1626 (Japanese): Application Note 1626 551013037 - LMP8100 Evaluation Board User Guide
    497 Kbytes   Download

    If you have trouble printing or viewing PDF file(s), see Printing Problems.

    [Information as of 7-Nov-2009]