Features Unless otherwise noted, typical values at VS = 5V. Input offset voltage ±150 μV (max) Input bias current 100 fA Input voltage noise 5.8 nV/ √Hz Gain bandwidth product 17 MHz Supply current (LMP7715) 1.15 mA Supply current (LMP7716/LMP7716Q) 1.30 mA Supply voltage range 1.8V to 5.5V THD+N @ f = 1 kHz 0.001% Operating temperature range −40°C to 125°C Rail-to-rail output swing Space saving SOT-23 package (LMP7715) 8-Pin MSOP package (LMP7716/LMP7716Q) LMP7716Q is AEC-Q100 grade 1 qualified and is manufactured on an automotive grade flow Description The LMP7715/LMP7716/LMP7716Q are single and dual low noise, low offset, CMOS input, rail-to-rail output precision amplifiers with high gain bandwidth products. The LMP7715/LMP7716/LMP7716Q are part of the LMP precision amplifier family and are ideal for a variety of instrumentation applications. Utilizing a CMOS input stage, the LMP7715/LMP7716/LMP7716Q achieve an input bias current of 100 fA, an input referred voltage noise of 5.8 nV/ , and an input offset voltage of less than ±150 μV. These features make the LMP7715/LMP7716/LMP7716Q superior choices for precision applications. Consuming only 1.15 mA of supply current, the LMP7715 offers a high gain bandwidth product of 17 MHz, enabling accurate amplification at high closed loop gains. The LMP7715/LMP7716/LMP7716Q have a supply voltage range of 1.8V to 5.5V, which makes these ideal choices for portable low power applications with low supply voltage requirements. The LMP7715/LMP7716/LMP7716Q are built with National’s advanced VIP50 process technology. The LMP7715 is offered in a 5-pin SOT-23 package and the LMP7716/LMP7716Q is offered in an 8-pin MSOP. The LMP7716Q incorporates enhanced manufacturing and support processes for the automotive market, including defect detection methodologies. Reliability qualification is compliant with the requirements and temperature grades defined in the AEC-Q100 standard. Applications • Active filters and buffers • Sensor interface applications • Transimpedance amplifiers • Automotive

LMP7716 Webench® Custom Design/Analyze/Build It Select Topology Active Filter Designer Inverting Amplifier AC-Coupled Inverting Amp NonInverting Amp Lowpass Filter Lowpass Filter 4th Order Highpass Filter Required Parameters Supply voltage: 5V 3.3V Other If "Other", Positive Supply is: V If "Other", Negative Supply is: V NOTE: 1.8 V <= Total Supply Voltage <= 5 V What is Webench? Also Recommended LMP2012▲ LMP2012 - Dual, High Precision, Rail-to-Rail Output Operational Amplifier LMP7702▲ LMP7702 - Precision, CMOS Input, RRIO, Wide Supply Range Amplifiers LMP7712▲ LMP7712 - Dual Precision, 17 MHz, Low Noise, CMOS Input Amplifier MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

Typical Application *click for larger image	Connection Diagram *click for larger image
Typical Performance click for larger image

Datasheet

Title		Size	Date	Other Language
	LMP7715/LMP7716/LMP7716Q Single and Dual Precision, 17 MHz, Low Noise, CMOS Input Amplifiers	1159 Kbytes	20-Oct-09	日本語

Featured Application Notes

Title		Size	Date	Other Language
	AN-1738: Application Note 1738 551013276 and 551013277 Evaluation Boards for Dual Decompensated Operational Amplifiers (MSOP-8 and SOIC-8)	323 Kbytes	12-Dec-07	日本語

More Application Notes

Title		Size	Date	Other Language
	AN-1515: Application Note 1515 A Comprehensive Study of the Howland Current Pump	227 Kbytes	29-Jan-08
	AN-1559: Application Note 1559 Practical RTD Interface Solutions	215 Kbytes	10-Oct-07	日本語 中文
	AN-1841: Application Note 1841 LMH1982 Evaluation Board User Guide	913 Kbytes	21-May-08	中文

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LMP7716MM	VIP50CLZ3	0	1755	0	0	315000	12	89382110
LMP7716MME	VIP50CLZ3	0	1755	0	0	315000	12	89382110
LMP7716MMX	VIP50CLZ3	0	1755	0	0	315000	12	89382110
LMP7716QMM	VIP50CLZ3	0	1755	0	0	315000	12	89382110
LMP7716QMME	VIP50CLZ3	0	1755	0	0	315000	12	89382110
LMP7716QMMX	VIP50CLZ3	0	1755	0	0	315000	12	89382110

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.