Features Supply range 3 to 12V single supply Supply range ±1.5V to ±6V split supply 1.0 GHz −3 dB small signal bandwidth (AV = +1, VS = ±5V) 650 MHz −3 dB small signal bandwidth (AV = +2, VS = 5V) Low supply current (5.5 mA per op amp, VS = 5V) 2.1 nV/ input noise voltage 3750 V/μs slew rate 70 mA linear output current CMIR and output swing to 1V from each supply rail Description The LMH6733 is a triple, wideband, operational amplifier designed specifically for use where high speed and low power are required. Input voltage range and output voltage swing are optimized for operation on supplies as low as 3V and up to ±6V. Benefiting from National’s current feedback architecture, the LMH6733 offers a gain range of ±1 to ±10 while providing stable operation without external compensation, even at unity gain. These amplifiers provide 650 MHz small signal bandwidth at a gain of 2 V/V , a low 2.1 nV/ input referred noise and only consume 5.5 mA (per amplifier) from a single 5V supply. The LMH6733 is offered in a 16-Pin SSOP package with flow through pinout for ease of layout and is also pin compatible with the LMH6738. Each amplifier has an individual shutdown pin. Applications HDTV component video driver High resolution projectors Flash A/D driver D/A transimpedance buffer Wide dynamic range IF amp Radar/communication receivers DDS post-amps Wideband inverting summer Line driver

LMH6733 Webench® Custom Design/Analyze/Build It Select Topology Active Filter Designer Inverting Amplifier AC-Coupled Inverting Amp NonInverting Amp Lowpass Filter Lowpass Filter 4th Order Highpass Filter Required Parameters Supply voltage: 5V 3.3V +/-5V +/-3.3V Other If "Other", Positive Supply is: V If "Other", Negative Supply is: V NOTE: 3 V <= Total Supply Voltage <= 12 V What is Webench? Also Recommended LMH6738▲ Lower Bandwidth Version (750 MHz) LMH6734 Selectable Gain (+1/+2) Version

	Connection Diagram click for larger image
Typical Performance click for larger image Large Singal Frequency Response

Parameters / Values	LMH6733	LMH6738
-3dB BW	1000 MHz	750 MHz
AvCL for -3dB BW	1 V/V	1 V/V
Slew Rate	3750 Volts/usec	3300 Volts/usec
Input OutputType	Not Rail to Rail	Not Rail to Rail
Supply Min	3 Volt	10 Volt
Supply Max	12 Volt	12 Volt
Supply Current Per Channel	6.5 mA	10.5 mA
PowerWise Rating 2	6.5 uA/MHz	14 uA/MHz
Channels	3 Channels	3 Channels
Offset Voltage max, 25C	2.2 mV	2.5 mV
Max Input Bias Current	26000 nA	5000 nA
Output Current	80 mA	90 mA
Voltage Noise	2.1 nV/root(Hz)	2.2 nV/root(Hz)
Shut down	Yes	Yes
Feedback Type	Current	Current
Av+1 BW	1000 MHz	750 MHz
Av+2 BW	830 MHz	480 MHz
Av+5 BW	400 MHz	320 MHz
HD 2nd	-72 dB	-80 dB
HD 3rd	-63 dB	-90 dB
Diff Gain	0.03 %	0.02 %
Diff Phase	0.03 deg	0.01 deg
Settling Time	10 ns	10 ns
Tsettling Conditions	to 0.1%	to 1%
Function	Op Amp	Op Amp
Gain Bandwidth	1000 MHz	400 MHz
Temperature Min	-40 deg C	-40 deg C
Temperature Max	85 deg C	85 deg C
PowerWise	Yes	Yes

Datasheets

Title		Size	Date	Other Language
	LMH6733 Single Supply, 1.0 GHz, Triple Operational Amplifier	519 Kbytes	6-Jul-11	日本語

Application Notes

Title		Size	Date	Other Language
	AN-1822: Application Note 1822 LMH6733 High Definition Video Transmission Over CAT5	691 Kbytes	14-Jan-09

Other Technical Documents

Title		Type	Date
	HD Component Video Over CAT5 Cable Using Current Feedback Amplifiers	External Article	2009-06-12

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH6733MQ/NOPB RoHS Status	SSOP	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0 FARNELL Europe and Asia 199 NEWARK Americas 4	$2.60 each at 1K+ pcs	rail of 95
LMH6733MQX/NOPB RoHS Status	SSOP	Full production Lead Time: 6 weeks	Distributor Region Qty AITG Asia Pacific 1001 DIGI-KEY Worldwide 0	$2.60 each at 1K+ pcs	reel of 2500

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6733.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6733 is located at RoHS Status.

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730275/NOPB	Evaluation Board for High-Speed Triple Op Amp in the 16-Pin SSOP Package	Full production Lead Free (RoHS)	Distributor Region Qty AVNET-EM Worldwide 6 DIGI-KEY Worldwide 0 MOUSER Worldwide 1	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 16-Pin SSOP package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder. Evaluation Board User Manual Evaluation Board Design Files

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

Lead Free product status is available through the search tool located here

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
LMH6733MQ/NOPB	73.053	SSOP	16	1	260	Detail	Download	spice file	NSXYTT LH67 33MQ
LMH6733MQX/NOPB	73.053	SSOP	16	1	260	Detail	Download	spice file	NSXYTT LH67 33MQ

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6733.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6733 is located at RoHS Status.

Design Tools

Title	Size	Date
"LMH730275 SSOP Triple High Speed Evaluation Board - Included with LMH6733MQ Sample Order"	114 Kbytes	1-May-03

CAD Symbols and Models Download LMH6733 CAD Symbols

Models spice file

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LMH6733MQ	VIP 10	0	13411	0	0	1245000	3	353272149
LMH6733MQX	VIP 10	0	13411	0	0	1245000	3	353272149

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6733.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6733 is located at RoHS Status.