Features (VS = 16V, RL= 2 k to V+/2, 25°C, Typical Values Unless Specified) Supply current (no load) 4 mA Output resistance (closed loop 1 MHz) 0.35 -3 dB BW (AV = 1) 190 MHz Settling time (±0.1%, 2 VPP) 35 ns Input common mode voltage -0.3V to 15.1V Output voltage swing 100 mV from rails Linear output current ±100 mA Total harmonic distortion (2 VPP, 5 MHz) -64 dBc Fully characterized for: 5V & 16V No output phase reversal with CMVR exceeded   Differential gain (RL = 150) 0.12% Differential phase (RL = 150) 0.12° Description The LMH™6640 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 100 mA. Employing National's patented VIP10 process, the LMH6640 delivers a bandwidth of 190 MHz at a current consumption of only 4mA. An input common mode voltage range extending to 0.3V below the V- and to within 0.9V of V+, makes the LMH6640 a true single supply op-amp. The output voltage range extends to within 100 mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications. The LMH6640 offers a slew rate of 170 V/µs resulting in a full power bandwidth of approximately 28 MHz with 5V single supply (2 VPP, -1 dB). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including total harmonic distortion of -64 dBc @ 5 MHz, differential gain of 0.12% and differential phase of 0.12°. Applications TFT panel VCOM buffer amplifier Active filters CD/DVD ROM ADC buffer amplifier Portable video Current sense buffer

Typical Application click for larger image	Connection Diagram click for larger image
Typical Performance click for larger image

Parameters Values -3dB BW 190 MHz AvCL for -3dB BW 1 V/V Slew Rate 170 Volts/usec Input OutputType Vcm to V-, R-R Out Supply Min 4.5 Volt Supply Max 16 Volt Supply Current Per Channel 4 mA PowerWise Rating 2 21.1 uA/MHz Channels 1 Channels Offset Voltage max, 25C 1 mV Max Input Bias Current 3500 nA Output Current 110 mA Voltage Noise 10 nV/root(Hz) Shut down No Feedback Type Voltage Av+1 BW 190 MHz Av+2 BW 95 MHz Av+5 BW 38 MHz Av+10 BW 19 MHz Av+20 BW 9.5 MHz HD 2nd -71 dB HD 3rd -72 dB Diff Gain 0.12 % Diff Phase 0.12 deg Settling Time 35 ns Tsettling Conditions to 0.1% Special Features High Cload Drive Function Op Amp Gain Bandwidth 62 MHz Temperature Min -40 deg C Temperature Max 85 deg C

Datasheets

Title		Size	Date	Other Language
	LMH6640 TFT-LCD Single, 16V, Rail-to-Rail High Output Operational Amplifier	901 Kbytes	19-Nov-04

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH6640MF/NOPB LMH6640MF RoHS Status	SOT-23	Full production Lead Time: 6 weeks	Distributor Region Qty AITG Asia Pacific 1001 ARROW Worldwide 2000 DIGI-KEY Worldwide 1823 MOUSER Worldwide 965 NEWARK Americas 749 RS COMPONENTS Worldwide 465 TAYLOR Americas 2000	$1.15 each at 1K+ pcs	reel of 1000
LMH6640MFX/NOPB LMH6640MFX RoHS Status	SOT-23	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$1.15 each at 1K+ pcs	reel of 3000

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6640.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6640 is located at RoHS Status.

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730216/NOPB	Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package	Full production Lead Free (RoHS)	Distributor Region Qty AVNET-EM Worldwide 2 DIGI-KEY Worldwide 0 MOUSER Worldwide 3	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 5-/6-Pin SOT-23 package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder Evaluation Board User Manual Evaluation Board Design Files

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

Lead Free product status is available through the search tool located here

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
LMH6640MF/NOPB LMH6640MF	14.696 14.801	SOT-23	5	1 1	260 260	Detail	Download	N/A	AH1A XTT
LMH6640MFX/NOPB LMH6640MFX	14.696 14.801	SOT-23	5	1 1	260 260	Detail	Download	N/A	AH1A XTT

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6640.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6640 is located at RoHS Status.

CAD Symbols and Models Download LMH6640 CAD Symbols

Models N/A