Features (VS = 5V, Typical values unless specified) Supply current (no load) 3.6mA Supply current (off mode) 400μA Output resistance (closed loop 1MHz) 0.186Ω −3dB BW (AV = 1) 190MHz Settling time 33nsec Input common mode voltage −0.2V to 4V Output voltage swing 40mV from rails Linear output current 110mA Total harmonic distortion −60dBc Fully characterized for 3V, 5V and ±5V No output phase reversal with CMVR exceeded Excellent overdrive recovery Off Isolation 1MHz −70dB Differential Gain 0.12% Differential Phase 0.045° Description The LMH6639 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 110mA. Employing National’s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V − and to within 1V of V +, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications. The LMH6639 offers a slew rate of 172V/μs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The TON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications (see application note for details). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including harmonic distortion of −60dBc, differential gain of 0.12% and differential phase of 0.045° Applications Active filters CD/DVD ROM ADC buffer amplifier Portable video Current sense buffer

LMH6639 Webench® Custom Design/Analyze/Build It Select Topology Active Filter Designer Inverting Amplifier AC-Coupled Inverting Amp NonInverting Amp Integrator Lowpass Filter Lowpass Filter 4th Order Highpass Filter Required Parameters Supply voltage: 5V 3.3V +/-5V +/-3.3V Other If "Other", Positive Supply is: V If "Other", Negative Supply is: V NOTE: 3 V <= Total Supply Voltage <= 12 V What is Webench? Also Recommended LMH6601▲ 250Mhz Rail To Rail CMOS Amp With High Impedance Input LMH6611▲ Higher 345MHz Bandwidth, 3.2mA Supply With Rail To Rail Output LMH6618▲ Lower Power 1.25mA, 130MHz Rail To Rail Input And Output

	Connection Diagram click for larger image
Typical Performance *click for larger image On-Off switching

Parameters / Values	LMH6639	LMH6601	LMH6611	LMH6618
-3dB BW	228 MHz	250 MHz	365 MHz	140 MHz
AvCL for -3dB BW	1 V/V	1 V/V	1 V/V	1 V/V
Slew Rate	172 Volts/usec	275 Volts/usec	460 Volts/usec	57 Volts/usec
Input OutputType	Vcm to V-, R-R Out	Vcm to V-, R-R Out	Vcm to V-, R-R Out	R-R In and Out
Supply Min	3 Volt	2.4 Volt	2.7 Volt	2.7 Volt
Supply Max	12 Volt	5.5 Volt	11 Volt	11 Volt
Supply Current Per Channel	3.6 mA	9.6 mA	3.3 mA	1.35 mA
PowerWise Rating 2	15.8 uA/MHz	38.4 uA/MHz	9.0 uA/MHz	9.6 uA/MHz
Channels	1 Channels	1 Channels	1 Channels	1 Channels
Offset Voltage max, 25C	5 mV	2.4 mV	0.6 mV	0.6 mV
Max Input Bias Current	3250 nA	0.1 nA	11100 nA	2400 nA
Output Current	160 mA	150 mA	120 mA	35 mA
Voltage Noise	12 nV/root(Hz)	10 nV/root(Hz)	10 nV/root(Hz)	10 nV/root(Hz)
Shut down	Yes	Yes	Yes	Yes
Feedback Type	Voltage	Voltage	Voltage	Voltage
Av+1 BW	228 MHz	250 MHz	365 MHz	140 MHz
Av+2 BW	114 MHz	125 MHz	182.5 MHz	70 MHz
Av+5 BW	45.6 MHz	50 MHz	73 MHz	28 MHz
Av+10 BW	22.8 MHz	25 MHz	36.5 MHz	14 MHz
Av+20 BW	11.4 MHz	12.5 MHz	18.25 MHz	7 MHz
HD 2nd	-65 dB	-56 dB	-82 dB	-75 dB
Diff Gain	0.065 %	0.25 %	0.05 %	0.1 %
Diff Phase	0.05 deg	0.25 deg	0.05 deg	0.1 deg
Settling Time	33 ns	250 ns	67 ns	90 ns
Tsettling Conditions	to 0.1%	to 0.02%	to 0.1%	to 0.1%
Special Features	85nsec turn on	CMOS Input		Precision Hi Speed
Function	Op Amp	Op Amp	Op Amp	Op Amp
Gain Bandwidth	190 MHz	125 MHz	345 MHz	140 MHz
Temperature Min	-40 deg C	-40 deg C	-40 deg C	-40 deg C
Temperature Max	85 deg C	85 deg C	125 deg C	125 deg C
PowerWise	Yes	No	Yes	Yes

Datasheets

Title		Size	Date	Other Language
	LMH6639 190MHz Rail-to-Rail Output Amplifier with Disable	648 Kbytes	5-Oct-10	日本語

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH6639MA/NOPB LMH6639MA RoHS Status	SOIC NARROW	Full production Lead Time: 6 weeks	Distributor Region Qty ARROW Worldwide 475 AVNET-EM Worldwide 470 DIGI-KEY Worldwide 749 FARNELL Europe and Asia 614 MOUSER Worldwide 570 NEWARK Americas 431 RS COMPONENTS Worldwide 42 TAYLOR Americas 475	$0.63 each at 1K+ pcs	rail of 95
LMH6639MAX/NOPB LMH6639MAX RoHS Status	SOIC NARROW	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$0.63 each at 1K+ pcs	reel of 2500
LMH6639MF/NOPB LMH6639MF RoHS Status	SOT-23	Full production Lead Time: 8 weeks	Distributor Region Qty ARROW Worldwide 1850 AVNET-EM Worldwide 6000 DIGI-KEY Worldwide 321 FARNELL Europe and Asia 516 NEWARK Americas 74 TAYLOR Americas 4850	$0.63 each at 1K+ pcs	reel of 1000
LMH6639MFX/NOPB LMH6639MFX RoHS Status	SOT-23	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$0.63 each at 1K+ pcs	reel of 3000
LMH6639 MDC RoHS Status		Full production Lead Time: N/A	Contact your distributor	CALL	tray of N/A

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6639.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6639 is located at RoHS Status.

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730216/NOPB	Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package	Full production Lead Free (RoHS)	Distributor Region Qty AVNET-EM Worldwide 2 DIGI-KEY Worldwide 0 MOUSER Worldwide 3	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 5-/6-Pin SOT-23 package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder Evaluation Board User Manual Evaluation Board Design Files

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730227/NOPB	Evaluation Board for High-Speed Single Op Amp in the 8-Pin SOIC Package	Full production Lead Free (RoHS)	Distributor Region Qty AVNET-EM Worldwide 2 DIGI-KEY Worldwide 7 MOUSER Worldwide 2	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 8-Pin SOIC package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder. Evaluation Board User Manual Evaluation Board Design Files

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

Lead Free product status is available through the search tool located here

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
LMH6639MA/NOPB LMH6639MA	69.761 70.001	SOIC NARROW	8	1 1	260 235	Detail	Download	spice file	NSZXTT LMH66 39MA
LMH6639MAX/NOPB LMH6639MAX	69.761 70.001	SOIC NARROW	8	1 1	260 235	Detail	Download	spice file	NSZXTT LMH66 39MA
LMH6639MF/NOPB LMH6639MF	15.063 15.2	SOT-23	6	1 1	260 260	Detail	Download	spice file	A81A XTT
LMH6639MFX/NOPB LMH6639MFX	15.063 15.2	SOT-23	6	1 1	260 260	Detail	Download	spice file	A81A XTT
LMH6639 MDC	N/A	Unpackaged Die				spice file	-

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6639.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6639 is located at RoHS Status.

Design Tools

Title	Size	Date
"LMH730227/LMH730216/LMH730165 Single High Speed Op Amp Evaluation Boards (SOIC, SOT23, and SC70) (Chinese)"	371 Kbytes	6-Dec-2006
CLC730116 SOT23-6 Evaluation Board - Included with LMH6639MF Sample Order	93 Kbytes	22-Jun-01
"LMH730227/LMH730216/LMH730165 Single High Speed Op Amp Evaluation Boards (SOIC, SOT23, and SC70)"	6588 Kbytes	15-Dec-2008

CAD Symbols and Models Download LMH6639 CAD Symbols

Models spice file

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LMH6639MA	VIP 10	0	13411	0	0	1245000	3	353272149
LMH6639MAX	VIP 10	0	13411	0	0	1245000	3	353272149
LMH6639MF	VIP 10	0	13411	0	0	1245000	3	353272149
LMH6639MFX	VIP 10	0	13411	0	0	1245000	3	353272149

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6639.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6639 is located at RoHS Status.