Features VS = 3.3V, TA = 25°C, AV = 2 V/V, RL = 150Ω to V −, unless specified. 125 MHz −3 dB small signal bandwidth 75 MHz −3 dB large signal bandwidth 30 MHz large signal 0.1 dB gain flatness 260 V/μs slew rate 0.25%/0.25° differential gain/differential phase Rail-to-rail output 2.4V – 5.5V single supply operating range 6-Pin SC70 Package LMH6601Q is AEC-Q100 grade 3 qualified and is manufactured on an automotive grade flow Description The LMH6601 is a low voltage (2.4V – 5.5V), high speed voltage feedback operational amplifier suitable for use in a variety of consumer and industrial applications. With a bandwidth of 125 MHz at a gain of +2 and guaranteed high output current of 100 mA, the LMH6601 is an ideal choice for video line driver applications including HDTV. Low input bias current (50 pA maximum), rail-to-rail output, and low current noise allow the LMH6601 to be used in various industrial applications such as transimpedance amplifiers, active filters, or high-impedance buffers. The LMH6601 is an attractive solution for systems which require high performance at low supply voltages. The LMH6601 is available in a 6-pin SC70 package, and includes a micropower shutdown feature. Applications Video amplifier Charge amplifier Set-top box Sample & hold Transimpedance amplifier Line driver High impedance buffer Automotive

Also Recommended LMH6611▲ Higher 345 MHz Bandwidth And Lower 3.2mA Supply Current

	Connection Diagram click for larger image
Typical Performance *click for larger image -3 dB BW vs. Supply Voltage for Various Output Swings

Parameters / Values	LMH6601	LMH6611
-3dB BW	250 MHz	365 MHz
AvCL for -3dB BW	1 V/V	1 V/V
Slew Rate	275 Volts/usec	460 Volts/usec
Input OutputType	Vcm to V-, R-R Out	Vcm to V-, R-R Out
Supply Min	2.4 Volt	2.7 Volt
Supply Max	5.5 Volt	11 Volt
Supply Current Per Channel	9.6 mA	3.3 mA
PowerWise Rating 2	38.4 uA/MHz	9.0 uA/MHz
Channels	1 Channels	1 Channels
Offset Voltage max, 25C	2.4 mV	0.6 mV
Max Input Bias Current	0.1 nA	11100 nA
Output Current	150 mA	120 mA
Voltage Noise	10 nV/root(Hz)	10 nV/root(Hz)
Shut down	Yes	Yes
Feedback Type	Voltage	Voltage
Av+1 BW	250 MHz	365 MHz
Av+2 BW	125 MHz	182.5 MHz
Av+5 BW	50 MHz	73 MHz
Av+10 BW	25 MHz	36.5 MHz
Av+20 BW	12.5 MHz	18.25 MHz
HD 2nd	-56 dB	-82 dB
HD 3rd	-73 dB	-80 dB
Diff Gain	0.25 %	0.05 %
Diff Phase	0.25 deg	0.05 deg
Settling Time	250 ns	67 ns
Tsettling Conditions	to 0.02%	to 0.1%
Special Features	CMOS Input
Function	Op Amp	Op Amp
Gain Bandwidth	125 MHz	345 MHz
Temperature Min	-40 deg C	-40 deg C
Temperature Max	85 deg C	125 deg C
AEC Q-100 Automotive Grade	3
Automotive	Yes
PowerWise	No	Yes

Datasheets

Title		Size	Date	Other Language
	LMH6601 250 MHz, 2.4V CMOS Operational Amplifier with Shutdown	1561 Kbytes	20-Oct-09	日本語

Other Technical Documents

Title		Type	Date
	Compensation techniques for driving large-capacitance loads with high-speed amplifiers	External Article	2008-02-12
	Your Walls Will Be Changing (Circuits for LCD Multimedia TV Panels)	External Article	2007-09-12

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH6601MG/NOPB RoHS Status	SC-70	Full production Lead Time: 6 weeks	Distributor Region Qty ARROW Worldwide 1000 DIGI-KEY Worldwide 2795 FARNELL Europe and Asia 1956 MOUSER Worldwide 379 NEWARK Americas 925 RS COMPONENTS Worldwide 60 RSL MICRO Asia Pacific 1000 TAYLOR Americas 1000	$0.65 each at 1K+ pcs	reel of 1000
LMH6601MGX/NOPB RoHS Status	SC-70	Full production Lead Time: 8 weeks	Distributor Region Qty DIGI-KEY Worldwide 0 MOUSER Worldwide 3000	$0.65 each at 1K+ pcs	reel of 3000
LMH6601QMG/NOPB RoHS Status	SC-70	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 1781 MOUSER Worldwide 975	$0.85 each at 1K+ pcs	reel of 1000
LMH6601QMGX/NOPB RoHS Status	SC-70	Full production Lead Time: 16 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$0.85 each at 1K+ pcs	reel of 3000

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6601.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6601 is located at RoHS Status.

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730165/NOPB	Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SC-70 Package	Full production Lead Free (RoHS)	Distributor Region Qty DIGI-KEY Worldwide 0 MOUSER Worldwide 1	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 5-/6-Pin SC-70 package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder. Evaluation Board User Manual Evaluation Board Design Files

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

Lead Free product status is available through the search tool located here

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
LMH6601MG/NOPB	7.64	SC-70	6	1	260	Detail	Download	spice file	A95 XTT
LMH6601MGX/NOPB	7.64	SC-70	6	1	260	Detail	Download	spice file	A95 XTT
LMH6601QMG/NOPB	7.64	SC-70	6	1	260	Detail	Download	spice file	AKA XTT
LMH6601QMGX/NOPB	7.64	SC-70	6	1	260	Detail	Download	spice file	AKA XTT

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6601.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6601 is located at RoHS Status.

Design Tools

Title	Size	Date
"LMH730227/LMH730216/LMH730165 Single High Speed Op Amp Evaluation Boards (SOIC, SOT23, and SC70) (Chinese)"	371 Kbytes	6-Dec-2006
"LMH730227/LMH730216/LMH730165 Single High Speed Op Amp Evaluation Boards (SOIC, SOT23, and SC70)"	6588 Kbytes	15-Dec-2008

CAD Symbols and Models Download LMH6601 CAD Symbols

Models spice file

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LMH6601MG	CMOS7	0	21301	0	0	1584000	3	449464325
LMH6601MGX	CMOS7	0	21301	0	0	1584000	3	449464325
LMH6601QMG	CMOS7	0	21301	0	0	1584000	3	449464325
LMH6601QMGX	CMOS7	0	21301	0	0	1584000	3	449464325

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LMH6601.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LMH6601 is located at RoHS Status.