LME49710   
High Performance, High Fidelity Audio Operational Amplifier from the PowerWise® Family		 Click link to Download

Features
• Easily drives 600Ω loads
• Optimized for superior audio signal fidelity
• Output short circuit protection
• PSRR and CMRR exceed 120dB (typ)
• SOIC, DIP, TO-99 metal can packages

Description

The LME49710 is part of the ultra-low distortion, low noise, high slew rate operational amplifier series optimized and fully specified for high performance, high fidelity applications. Combining advanced leading-edge process technology with state-of-the-art circuit design, the LME49710 audio operational amplifiers deliver superior audio signal amplification for outstanding audio performance. The LME49710 combines extremely low voltage noise density (2.5nV/ ^Hz) with vanishingly low THD+N (0.00003%) to easily satisfy the most demanding audio applications. To ensure that the most challenging loads are driven without compromise, the LME49710 has a high slew rate of ±20V/μs and an output current capability of ±26mA. Further, dynamic range is maximized by an output stage that drives 2kΩ loads to within 1V of either power supply voltage and to within 1.4V when driving 600Ω loads.

The LME49710's outstanding CMRR(120dB), PSRR(120dB), and VOS (0.05mV) give the amplifier excellent operational amplifier DC performance.

The LME49710 has a wide supply range of ±2.5V to ±17V. Over this supply range the LME49710’s input circuitry maintains excellent common-mode and power supply rejection, as well as maintaining its low input bias current. The LME49710 is unity gain stable. The Audio Operational Amplifier achieves outstanding AC performance while driving complex loads with values as high as 100pF.

The LME49710 is available in 8–lead narrow body SOIC, 8–lead plastic DIP, and 8–lead metal can TO-99. Demonstration boards are available for each package.

Key Specification
■  Power Supply Voltage Range ±2.5V to ±17V
■  THD+N (AV = 1, VOUT = 3VRMS, fIN = 1kHz)  
 RL = 2kΩ 0.00003% (typ)
 RL = 600Ω 0.00003% (typ)
■  Input Noise Density 2.5nV/ √ ^Hz (typ)
■  Slew Rate ±20V/μs (typ)
■  Gain Bandwidth Product 55MHz (typ)
■  Open Loop Gain (RL = 600Ω) 140dB (typ)
■  Input Bias Current 7nA (typ)
■  Input Offset Voltage 0.05mV (typ)
■  DC Gain Linearity Error 0.000009%

Applications
• Ultra high quality audio amplification
• High fidelity preamplifiers
• High fidelity multimedia
• State of the art phono pre amps
• High performance professional audio
• High fidelity equalization and crossover networks
• High performance line drivers
• High performance line receivers
• High fidelity active filters

Also Recommended
LM4562▲Dual High Performance High Fidelity Audio Op Amp
LME49740▲Quad High Performance High Fidelity Audio Op Amp



MY BRIEFCASE                                     Remove all from My Briefcase 
Click any "Briefcase" icon to add an item

Typical Application
*click for larger image


Connection Diagram
*click for larger image



Typical Performance
click for larger image


Paramaters / ValuesLME49710 LM4562 LME49740
THD0.00003 % 0.00003 % 0.00003 %
PSRR125 dB 120 dB 120 dB
Supply Min5 Volt 5 Volt 5 Volt
Single/Dual/QuadSingle Dual Quad
Special FeaturesUltra Low Distortion, Very Low Noise Ultra Low Distortion, Very Low Noise Ultra Low Distortion, Very Low Noise
THD ConditionsAv=1; Vout=3Vrms; Load=600ohm and 2k Av=1; Vout=3Vrms; Load=600ohm and 2k Av=1; Vout=3Vrms; Load=600ohm and 2k
PSRR Conditionsdelta(Vs)=20V delta(Vs)=20V delta(Vs)=20V
Supply Current per Amplifier4.8 mA 5.0 mA 4.62 mA
Supply Max34 Volt 34 Volt 34 Volt
Shut downNo No No
Voltage Noise2.5 nV/root(Hz) 2.7 nV/root(Hz) 2.5 nV/root(Hz)
Max Input Bias Current72 nA 72 nA 72 nA
Output Current26 mA 42 mA 30 mA
Offset Voltage, typ0.05 mV 0.1 mV 0.1 mV
Gain Bandwidth55 MHz 55 MHz 55 MHz
Slew Rate20 Volts/usec 20 Volts/usec 20 Volts/usec
CMRR120 dB 120 dB 120 dB
CMRR ConditionsVcm from -10V to +10V Vcm from -10V to +10V Vcm from -10V to +10V
Temperature Min-40 deg C -40 deg C -40 deg C
Temperature Max85 deg C 85 deg C 85 deg C
Channels1 Channels 2 Channels 4 Channels
Input OutputTypeNot Rail to Rail Not Rail to Rail Not Rail to Rail
Offset Voltage max, 25C0.7 mV 0.7 mV 0.7 mV
AutomotiveYes Yes
PowerWiseYes Yes Yes
Part Number(s)
(NSID)		Top ViewAvailabilityCurrent Reported StockBudgetary PricingStandard Pack Size
LME49710HA/NOPB

RoHS



TO-99		Full production
Lead Time: 6 weeks

Samples
DistributorRegionQty
DIGIKEYWorldwide235
FARNELLEurope and Asia485
FUTUREWorldwide40
NEWARKAmericas17
$5.50 each at 1K+ pcstray
of
20
LME49710MA/NOPB

RoHS



SOIC NARROW		Full production
Lead Time: 6 weeks

Samples
DistributorRegionQty
ARROWWorldwide15
DIGIKEYWorldwide469
FARNELLEurope and Asia482
FUTUREWorldwide855
NEWARKAmericas322
$0.90 each at 1K+ pcsrail
of
95
LME49710MAX/NOPB

RoHS



SOIC NARROW		Full production
Lead Time: 8 weeks

 
DistributorRegionQty
DIGIKEYWorldwide0
$0.90 each at 1K+ pcsreel
of
2500
LME49710NA/NOPB

RoHS



MDIP		Full production
Lead Time: 6 weeks

Samples
DistributorRegionQty
AVNET-EMWorldwide88
DIGIKEYWorldwide1415
FUTUREWorldwide360
NEWARKAmericas141
$0.90 each at 1K+ pcsrail
of
40

Part Number(s)
(NSID)		DescriptionAvailabilityCurrent Reported StockBudgetary PricingStandard Pack Size
LME49710HABD
High Performance, High Fidelity Audio Operational AmplifierFull production


 
DistributorRegionQty
DIGIKEYWorldwide0
NATIONALWorldwide75
$150.00 each1

The LME49710 is a Single High Fidelity Audio Operational Amplifier. This Audio Amplifier offers near zero THD+N and sets a new standard for high end audio users. National's newest Amplifier uses state of the art circuitry and process to achieve a new class of audio performance and technology. The AC and DC parameters in this amplifier series offers users a solution well suited for the most demanding signal path applications. There are three package choices to enable all users' ease of use and evaluation criteria.

The LME49710 is designed for high slew rate, low noise and high output for systems needing +/-2.5 to +/-17V functionality. The pin out is the National standard to quickly upgrade existing boards. This series is for applications such as high quality audio amplification, multi-media, imaging, line drivers/receivers and active filters. The output current is for 600Ohm loads with more than 26mA drive with THD+N over a wide voltage range.

The LME49710MADB, LME49710NADB and LME49710HADB are evaluation boards designed to establish performance and evaluation to design the best end user system. The evaluation boards include all components for ready-to-use, a stand-alone bench work.

Features:

  • Single Audio Operational Amplifier
  • Ultra low THD+N of 0.00003%
  • 34V operation and low noise
  • 600Ohm loads
  • SNR 97dB
  • High output of 26mA
  • Gain Bandwidth Product >55MHz
  • 20uV/S Slew rate
  • DC Gain Linearity Error of 0.000009%
  • PSRR >120dB
  • CMRR >120dB
  • Vos is 0.1mV
  • Three package offerings

Applications

  • High Fidelity Audio Equipment
  • High Fidelity drivers/receivers
  • 34V Industrial applications

Contents:

  • Fully Assembled LME49710 Evaluation Board
  • Instructions for where to locate and download the datasheet

     Please note: application information is in the LME49710 datasheet


Part Number(s)
(NSID)		DescriptionAvailabilityCurrent Reported StockBudgetary PricingStandard Pack Size
LME49710MABD
High Performance, High Fidelity Audio Operational AmplifierFull production


 
DistributorRegionQty
DIGIKEYWorldwide0
NATIONALWorldwide43
$150.00 each1

The LME49710 is a Single High Fidelity Audio Operational Amplifier. This Audio Amplifier offers near zero THD+N and sets a new standard for high end audio users. National's newest Amplifier uses state of the art circuitry and process to achieve a new class of audio performance and technology. The AC and DC parameters in this amplifier series offers users a solution well suited for the most demanding signal path applications. There are three package choices to enable all users' ease of use and evaluation criteria.

The LME49710 is designed for high slew rate, low noise and high output for systems needing +/-2.5 to +/-17V functionality. The pin out is the National standard to quickly upgrade existing boards. This series is for applications such as high quality audio amplification, multi-media, imaging, line drivers/receivers and active filters. The output current is for 600Ohm loads with more than 26mA drive with THD+N over a wide voltage range.

The LME49710MADB, LME49710NADB and LME49710HADB are evaluation boards designed to establish performance and evaluation to design the best end user system. The evaluation boards include all components for ready-to-use, a stand-alone bench work.

Features:

  • Single Audio Operational Amplifier
  • Ultra low THD+N of 0.00003%
  • 34V operation and low noise
  • 600Ohm loads
  • SNR 97dB
  • High output of 26mA
  • Gain Bandwidth Product >55MHz
  • 20uV/S Slew rate
  • DC Gain Linearity Error of 0.000009%
  • PSRR >120dB
  • CMRR >120dB
  • Vos is 0.1mV
  • Three package offerings

Applications

  • High Fidelity Audio Equipment
  • High Fidelity drivers/receivers
  • 34V Industrial applications

Contents:

  • Fully Assembled LME49710 Evaluation Board
  • Instructions for where to locate and download the datasheet

Please note: application information is in the LME49710 datasheet


Part Number(s)
(NSID)		DescriptionAvailabilityCurrent Reported StockBudgetary PricingStandard Pack Size
LME49710NABD
High Performance, High Fidelity Audio Operational AmplifierFull production


 
DistributorRegionQty
DIGIKEYWorldwide0
NATIONALWorldwide81
$150.00 each1

The LME49710 is a Single High Fidelity Audio Operational Amplifier. This Audio Amplifier offers near zero THD+N and sets a new standard for high end audio users. National's newest Amplifier uses state of the art circuitry and process to achieve a new class of audio performance and technology. The AC and DC parameters in this amplifier series offers users a solution well suited for the most demanding signal path applications. There are three package choices to enable all users' ease of use and evaluation criteria.

The LME49710 is designed for high slew rate, low noise and high output for systems needing +/-2.5 to +/-17V functionality. The pin out is the National standard to quickly upgrade existing boards. This series is for applications such as high quality audio amplification, multi-media, imaging, line drivers/receivers and active filters. The output current is for 600Ohm loads with more than 26mA drive with THD+N over a wide voltage range.

The LME49710MADB, LME49710NADB and LME49710HADB are evaluation boards designed to establish performance and evaluation to design the best end user system. The evaluation boards include all components for ready-to-use, a stand-alone bench work.

Features:

  • Ultra low THD+N of 0.00003%
  • 34V operation and low noise
  • 600Ohm loads
  • SNR 97dB
  • High output of 26mA
  • Gain Bandwidth Product >55MHz
  • 20uV/S Slew rate
  • DC Gain Linearity Error of 0.000009%
  • PSRR >120dB
  • CMRR >120dB
  • Vos is 0.1mV
  • Three package offerings

Applications:

  • High Fidelity Audio Equipment
  • High Fidelity drivers/receivers
  • 34V Industrial applications

Contents:

  • Fully Assembled LME49710 Evaluation Board
  • Instructions for where to locate and download the datasheet

    • Please note: application information is in the LME49710 datasheet


Part Number(s)
(NSID)		Top ViewTypePinsMSL RatingPeak ReflowRoHSCAD SymbolsModelsPackage
Marking
Format
LME49710HA/NOPB
TO-9981NARoHSN/ALME49860.zip
NSZXYTTE#
LME
49710HA
LME49710MA/NOPB
SOIC NARROW81260RoHSN/ALME49860.zip
NSZXTT
L49710
MA
LME49710MAX/NOPB
SOIC NARROW81260RoHSN/ALME49860.zip
NSZXTT
L49710
MA
LME49710NA/NOPB
MDIP81NARoHSN/ALME49860.zip
NSUZXYTTE#
LME
49710NA

Reliability Metrics
Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
LME49710HAVIP III0155750012125003344050185
LME49710MAVIP III0155750012125003344050185
LME49710MAXVIP III0155750012125003344050185
LME49710NAVIP III0155750012125003344050185

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.


[Information as of 20-Nov-2009]