National Semiconductor | High-performance Analog

 

 LMC6035   
Low Power 2.7V Single Supply CMOS Operational Amplifiers 		Click link to Download

Features

(Typical Unless Otherwise Noted)

  • LMC6035 in micro SMD Package
  • Guaranteed 2.7V, 3V, 5V and 15V Performance
  • Specified for 2 k and 600 Loads
  • Wide Operating Range: 2.0V to 15.5V
  • Ultra Low Input Current: 20fA
  • Rail-to-Rail Output Swing @ 600: 200mV from either rail at 2.7V @ 100k: 5mV from either rail at 2.7V
  • High Voltage Gain: 126dB
  • Wide Input Common-Mode Voltage Range -0.1V to 2.3V at VS = 2.7V
  • Low Distortion: 0.01% at 10kHz
  • LMC6035 Dual LMC6036 Quad
  • See AN-1112 for micro SMD considerations

    • Description

    The LMC6035/6 is an economical, low voltage op amp capable of rail-to-rail output swing into loads of 600. LMC6035 is available in a chip sized package (8-Bump micro SMD) using National's micro SMD package technology. Both allow for single supply operation and are guaranteed for 2.7V, 3V, 5V and 15V supply voltage. The 2.7 supply voltage corresponds to the End-of-Life voltage (0.9V/cell) for three NiCd or NiMH batteries in series, making the LMC6035/6 well suited for portable and rechargeable systems. It also features a well behaved decrease in its specifications at supply voltages below its guaranteed 2.7V operation. This provides a "comfort zone" for adequate operation at voltages significantly below 2.7V. Its ultra low input currents (IIN) makes it well suited for low power active filter application, because it allows the use of higher resistor values and lower capacitor values. In addition, the drive capability of the LMC6035/6 gives these op amps a broad range of applications for low voltage systems.


    Applications

  • Filters
  • High Impedance Buffer or Preamplifier
  • Battery Powered Electronics
  • Medical Instrumentation

    • Also Recommended
    LMP7701▲Lower Input Offset (Vos)(0.3mV), Higher Bandwidth( 2.5MHz), Lower Input Bias Current, Lower Noise(12

    Parameters / ValuesLMC6035 LMP7701
    Supply Min2 Volt 2.7 Volt
    Supply Max15.5 Volt 12 Volt
    Gain Bandwidth1.4 MHz 2.5 MHz
    Slew Rate1.5 Volts/usec 1 Volts/usec
    Offset Voltage max, 25C5 mV 0.2 mV
    Max Input Bias Current0.09 nA 0.05 nA
    Input OutputTypeVcm to V-, R-R Out R-R In and Out
    Supply Current Per Channel0.4 mA 0.715 mA
    PowerWise Rating 2285.7 uA/MHz 286 uA/MHz
    Channels2 Channels 1 Channels
    Output Current5 mA 66 mA
    Shut downNo No
    Special FeaturesUndefined Low Offset CMOS Input
    Voltage Noise27 nV/root(Hz) 9 nV/root(Hz)
    Temperature Max85 deg C 125 deg C
    Temperature Min-40 deg C -40 deg C
    FunctionOp Amp Op Amp

    Datasheets
    TitleSizeDateOther
    Language
    LMC6035 Low Power 2.7V Single Supply CMOS Operational Amplifiers789
    Kbytes    		25-Oct-02日本語  

    Part Number(s)
    (NSID)    		Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LMC6035IM/NOPB

    LMC6035IM

    RoHS Status

    SOIC NARROW    		Full production
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    ARROWWorldwide1422
    DIGI-KEYWorldwide1620
    FARNELLEurope and Asia1120
    MOUSERWorldwide483
    RS COMPONENTSWorldwide5
    TAYLORAmericas1422
    		$0.50 each at 1K+ pcsrail
    of
    95
    LMC6035IMM/NOPB

    LMC6035IMM

    RoHS Status

    MINI SOIC    		Full production
    Lead Time: 16 weeks

    Samples
    DistributorRegionQty
    ARROWWorldwide4000
    AVNET-EMWorldwide1000
    DIGI-KEYWorldwide2132
    MOUSERWorldwide750
    NEWARKAmericas470
    TAYLORAmericas4000
    		$0.65 each at 1K+ pcsreel
    of
    1000
    LMC6035IMMX/NOPB

    LMC6035IMMX

    RoHS Status

    MINI SOIC    		Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    		$0.65 each at 1K+ pcsreel
    of
    3500
    LMC6035IMX/NOPB

    LMC6035IMX

    RoHS Status

    SOIC NARROW    		Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    ARROWWorldwide2500
    AVNET-EMWorldwide2500
    DIGI-KEYWorldwide0
    MOUSERWorldwide2500
    TAYLORAmericas2500
    		$0.50 each at 1K+ pcsreel
    of
    2500
    LMC6035ITL/NOPB


    RoHS Status

    MICRO SMD    		Full production
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    ARROWWorldwide250
    AVNET-EMWorldwide149
    DIGI-KEYWorldwide5090
    TAYLORAmericas250
    		$0.61 each at 1K+ pcsreel
    of
    250

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    LMC6035IBP
    		NONE
    		NATIONAL SEMICONDUCTOR
    		24 Jul 2009
    LMC6035IBPX
    		NONE
    		NATIONAL SEMICONDUCTOR
    		24 Jul 2009

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LMC6035.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LMC6035 is located at RoHS Status.

    Part Number(s)
    (NSID)    		Weight
    (milligrams)    		TypePinsMSL RatingPeak ReflowRoHS
    Status    		CAD SymbolsModelsPackage
    Marking
    Format
    LMC6035IM/NOPB

    LMC6035IM
    		69.761
    70.001
    		SOIC NARROW81
    1    		260
    235    		DetailDownloadspice file
    		NSZXTT
    LMC60
    35IM
    LMC6035IMM/NOPB

    LMC6035IMM
    		29.851
    30.002
    		MINI SOIC81
    1    		260
    260    		DetailDownloadspice file
    		ZXTT
    A06B
    LMC6035IMMX/NOPB

    LMC6035IMMX
    		29.851
    30.002
    		MINI SOIC81
    1    		260
    260    		DetailDownloadspice file
    		ZXTT
    A06B
    LMC6035IMX/NOPB

    LMC6035IMX
    		69.761
    70.001
    		SOIC NARROW81
    1    		260
    235    		DetailDownloadspice file
    		NSZXTT
    LMC60
    35IM
    LMC6035ITL/NOPB

    		3.608
    		MICRO SMD81260DetailDownloadspice file
    		XVA
    I 80

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LMC6035.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LMC6035 is located at RoHS Status.

    Design Tools
    TitleSizeDate
    LMC6035 Micro SMD Qualification Package4172 Kbytes17-Apr-2000
    Amplifiers Selection Guide software for Windows  

    CAD Symbols and Models
    Download LMC6035 CAD Symbols
    		 Models
    spice file


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    LMC6035IMP2CMOS0508600145035002578995367
    LMC6035IMMP2CMOS0508600145035002578995367
    LMC6035IMMXP2CMOS0508600145035002578995367
    LMC6035IMXP2CMOS0508600145035002578995367
    LMC6035ITLP2CMOS0508600145035002578995367

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LMC6035.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LMC6035 is located at RoHS Status.

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    LMC6035IBP
    		NONE
    		NATIONAL SEMICONDUCTOR
    		24 Jul 2009
    LMC6035IBPX
    		NONE
    		NATIONAL SEMICONDUCTOR
    		24 Jul 2009

    [Information as of 9-Feb-2012]
    Copyright © 2011 National Semiconductor Corporation