Features • Accurately senses die temperature of 2 remote ICs or diode junctions and local temperature • TruTherm BJT beta compensation technology accurately senses sub-micron process thermal diodes • 0.125°C LSb temperature resolution • 0.03125°C LSb remote temperature resolution with digital filter enabled • +127.875°C/–128°C and 0°C/255°C remote ranges • Programmable digital filters and analog front end filter • Remote diode fault detection, model selection and offset correction • Mask and status register support • 3 programmable ^TCRIT outputs with programmable shared hysteresis • Programmable conversion rate and shutdown mode one-shot conversion control • SMBus 2.0 compatible interface, supports TIMEOUT • Three-level address pin • 14-pin LLP package Description LM95233 is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can monitor the temperature of two remote diodes as well as its own temperature. The LM95233 can be used to very accurately monitor the temperature of up to two external devices such as microprocessors, graphics processors or diode-connected 2N3904s. The LM95233's TruTherm BJT beta compensation technology allows sensing of 90nm or 65nm process thermal diodes accurately. The LM95233 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95233 ^TCRIT1, ^TCRIT2 and ^TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the ^TCRIT1, ^TCRIT2 and ^TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the ^TCRIT outputs. LM95233's remote temperature channels have programmable digital filters to minimize unwanted ^TCRIT events when temperature spikes are encountered. For optimum flexibility and accuracy each LM95233 channel includes, registers for sub-micron process or 2N3904 diode model selection as well as offset correction. A three level address pin allows connection of up to 3 LM95233s to the same SMBus master. The LM95233 includes power saving functions such as: programmable conversion rate, shutdown mode, and turn off of unused channels. Key Specification ■  Local Temperature Accuracy ±2.0 °C (max) ■  Remote Diode Temperature Accuracy ±0.875 °C (max) ■  Supply Voltage 3.0 V to 3.6 V ■  Average Supply Current (1Hz conversion rate) 0.57 mA (typ) Applications • Processor/Computer System Thermal Management   (e.g. Laptop, Desktop, Workstations, Server) • Electronic Test Equipment • Office Electronics

Also Recommended LM95234▲ Quad Remote Diode Sensor With TruTherm(TM) Beta Compesation LM95233 Typical Application MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

Typical Application click for larger image LM95233 Typical Application	Block Diagram click for larger image
Typical Performance *click for larger image Thermal Diode Performance Comparison

Datasheet

Title		Size	Date	Other Language
	LM95233 Dual Remote Diode and Local Temperature Sensor with SMBus Interface and TruTherm™ Technology	776 Kbytes	27-Jun-07

Featured Application Notes

Title		Size	Date	Other Language
	AN-1727: Application Note 1727 Calibrating the ADC08xxxx Family of Ultra High-Speed Converters	72 Kbytes	6-Mar-08	日本語 中文

More Application Notes

Title		Size	Date	Other Language
	AN-1155: Application Note 1155 A Simple Software I2C Routine for the COP8	82 Kbytes	15-May-04
	AN-1260: Application Note 1260 Autonomous Fan Control for Processor Systems Using the LM85	74 Kbytes	10-Mar-04
	AN-1262: Application Note 1262 Four-Speed Fan Control Using Simple Remote Diode Temperature Sensor	70 Kbytes	1-Oct-02

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LM95233CISD	CMOS7	0	18406	0	0	1089000	4	309006723
LM95233CISDX	CMOS7	0	18406	0	0	1089000	4	309006723

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.