Features (VS = 5V, TA = 25°C, Typical values unless specified). GBWP 21MHz Wide supply voltage range 2.5V to 22V Slew rate 12V/µs Supply current/channel 1.15 mA Cap load limit Unlimited Output short circuit current +53mA/-75mA +/-5% Settling time 400ns (500pF, 100mVPP step) Input common mode voltage 0.3V beyond rails Input voltage noise 15nV/ Input current noise 1pA/ THD+N < 0.05% Description The LM8262 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range. This device has high output current drive, greater than Rail-to-Rail input common mode voltage range, unlimited capacitive load drive capability, and provides tested and guaranteed high speed and slew rate. It is specifically designed to handle the requirements of flat panel TFT panel VCOM driver applications as well as being suitable for other low power, and medium speed applications which require ease of use and enhanced performance over existing devices. Greater than Rail-to-Rail input common mode voltage range with 50dB of Common Mode Rejection, allows high side and low side sensing, among many applications, without having any concerns over exceeding the range and no compromise in accuracy. In addition, most device parameters are insensitive to power supply variations; this design enhancement is yet another step in simplifying its usage. The output stage has low distortion (0.05% THD+N) and can supply a respectable amount of current (15mA) with minimal headroom from either rail (300mV). The LM8262 is offered in the space saving MSOP package. Applications TFT-LCD flat panel VCOM driver A/D converter buffer High side/low side sensing Headphone amplifier

LM8262 Webench® Custom Design/Analyze/Build It Select Topology Active Filter Designer Inverting Amplifier AC-Coupled Inverting Amp NonInverting Amp Integrator Lowpass Filter Lowpass Filter 4th Order Highpass Filter Required Parameters Supply voltage: 5V 3.3V +/-5V +/-3.3V +/-12V Other If "Other", Positive Supply is: V If "Other", Negative Supply is: V NOTE: 2.5 V <= Total Supply Voltage <= 30 V What is Webench?

	Connection Diagram click for larger image
Typical Performance click for larger image

Parameters Values Output Current 60 mA Offset Voltage max, 25C 7 mV Gain Bandwidth 21 MHz Supply Min 2.5 Volt Supply Max 22 Volt Supply Current Per Channel 1.05 mA PowerWise Rating 2 50 uA/MHz Slew Rate 12 Volts/usec Input OutputType R-R In and Out Max Input Bias Current 2700 nA Voltage Noise 15 nV/root(Hz) Shut down No Special Features High Cload Drive Function Op Amp Channels 2 Channels Temperature Min -40 deg C Temperature Max 85 deg C Automotive Yes

Datasheets

Title		Size	Date	Other Language
	LM8262 RRIO, High Output Current & Unlimited Cap Load Op Amp in MSOP	255 Kbytes	24-Jun-02

Application Notes

Title		Size	Date	Other Language
	AN-1485: Application Note 1485 The Effect of Heavy Loads on the Accuracy and Linearity of Operational Amplifier Circuits	752 Kbytes	15-Sep-08

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LM8262MM/NOPB LM8262MM RoHS Status	MINI SOIC	Full production Lead Time: 6 weeks	Distributor Region Qty ARROW Worldwide 1870 AVNET-EM Worldwide 5000 DIGI-KEY Worldwide 7823 FARNELL Europe and Asia 1242 MOUSER Worldwide 518 NEWARK Americas 552 RS COMPONENTS Worldwide 338 TAYLOR Americas 10421	$1.05 each at 1K+ pcs	reel of 1000
LM8262MMX/NOPB LM8262MMX RoHS Status	MINI SOIC	Full production Lead Time: 16 weeks	Distributor Region Qty AITG Asia Pacific 1001 DIGI-KEY Worldwide 0	$1.05 each at 1K+ pcs	reel of 3500

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LM8262.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LM8262 is located at RoHS Status.

Part Number(s) (NSID)	Description	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
LMH730123/NOPB	Evaluation Board for High-Speed Dual Op Amp in the 8-Pin MSOP Package	Full production Lead Free (RoHS)	Distributor Region Qty AVNET-EM Worldwide 2 DIGI-KEY Worldwide 0 MOUSER Worldwide 3	$10.00 each	1
Description: National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 8-Pin MSOP package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit configuration. The performance can then be evaluated under the test conditions of your choice. Power supplies, analog signal source, and other measurement equipment shall be provided by the user. Features: Accommodates various high-speed Op Amp Allows quick and easy evaluation Serves as reference design to aid in high-speed PCB layout Utilizes surface-mount components NOTE: IC samples are not shipped with the Evaluation PCB, but may be requested separately from the Order page in the Product Folder. Evaluation Board User Manual Evaluation Board Design Files

National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

Lead Free product status is available through the search tool located here

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
LM8262MM/NOPB LM8262MM	29.851 30.002	MINI SOIC	8	1 1	260 260	Detail	Download	spice file	ZXTT A46
LM8262MMX/NOPB LM8262MMX	29.851 30.002	MINI SOIC	8	1 1	260 260	Detail	Download	spice file	ZXTT A46

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LM8262.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LM8262 is located at RoHS Status.

CAD Symbols and Models Download LM8262 CAD Symbols

Models spice file

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LM8262MM	VIP III	0	16160	0	0	1302500	3	369587931
LM8262MMX	VIP III	0	16160	0	0	1302500	3	369587931

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for LM8262.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for LM8262 is located at RoHS Status.