Features
(VS = ±15V, TA = 25°C, typical values.)
|
Tiny 5-pin SOT-23 package saves space
|
|
Greater than rail-to-rail input CMVR
|
−15.3V to 15.3V
|
|
Rail-to-rail output swing
|
−14.84V to 14.86V
|
|
Supply current
|
0.7 mA
|
|
Gain bandwidth
|
4.6 MHz
|
|
Slew Rate
|
1.9 V/µs
|
|
Wide supply range
|
2.7V to 32V
|
|
High power supply rejection ratio
|
106 dB
|
|
High common mode rejection ratio
|
115 dB
|
|
Excellent gain
|
106 dB
|
|
Temperature range
|
−40°C to 125°C
|
|
Tested at −40°C, 125°C and 25°C at 2.7V, ±5V and ±15V
|
Description The LM7341 is a rail-to-rail input and output amplifier in a small SOT-23 package with a wide supply voltage and temperature
range. The LM7341 has a 4.6 MHz gain bandwidth and a 1.9 volt per microsecond slew rate, and draws 0.75 mA of supply current
at no load.
The LM7341 is tested at −40°C, 125°C and 25°C with modern automatic test equipment. Detailed performance specifications at
2.7V, ±5V, and ±15V and over a wide temperature range make the LM7341 a good choice for automotive, industrial, and other
demanding applications.
Greater than rail-to-rail input common mode range with a minimum 76 dB of common mode rejection at ±15V makes the LM7341
a good choice for both high and low side sensing applications.
LM7341 performance is consistent over a wide voltage range, making the part useful for applications where the supply voltage
can change, such as automotive electrical systems and battery powered electronics.
The LM7341 uses a small SOT23-5 package, which takes up little board space, and can be placed near signal sources to reduce
noise pickup.
Applications
Automotive
Industrial robotics
Sensor output buffers
Multiple voltage power supplies
Reverse biasing of photodiodes
Low current optocouplers
High side sensing
Comparator
Battery chargers
Test point output buffers
Below ground current sensing
|
Also Recommended
| LM7321▲ | Faster, Lower Noise Amp In SOT23 And SOIC |
|
|
LM7321
