National Semiconductor | High-performance Analog

 

 LM5022   

60V Low Side Controller for Boost and SEPIC from the PowerWise® Family
Click link to Download

Features

  • Internal 60V Startup Regulator
  • 1A Peak MOSFET Gate Driver
  • VIN Range 6V to 60V
  • Duty Cycle Limit of 90%
  • Programmable UVLO with Hysteresis
  • Cycle-by-Cycle Current Limit
  • External Synchronizable (AC-coupled)
  • Single Resistor Oscillator Frequency Set
  • Slope Compensation
  • Adjustable Soft-start
  • MSOP-10 Package
  • Description

    The LM5022 is a high voltage low-side N-channel MOSFET controller ideal for use in boost and SEPIC regulators. It contains all of the features needed to implement single ended primary topologies. Output voltage regulation is based on current-mode control, which eases the design of loop compensation while providing inherent input voltage feed-forward. The LM5022 includes a start-up regulator that operates over a wide input range of 6V to 60V. The PWM controller is designed for high speed capability including an oscillator frequency range up to 2 MHz and total propagation delays less than 100 ns. Additional features include an error amplifier, precision reference, line under-voltage lockout, cycle-by-cycle current limit, slope compensation, soft-start, external synchronization capability and thermal shutdown. The LM5022 is available in the MSOP-10 package.


    Applications

  • Boost Converter
  • SEPIC Converter
  • WEBENCH® LM5022
        Min   Max   Range  
      VIN V    6.00 – 60.00V  
      VOUT V    6.00 – 300.00V  
      IOUT A    ≤ 20.00A  
      Ambient Temp °C    ≤ 100°C  
    Footprint BOM Cost Efficiency
    What are WEBENCH® tools?


    Also Recommended
    LM3421Similar Output Power Range, Dedicated For Boost And Buck-boost LED Drivers
    LM3423Similar To LM3421 (dedicated LED Driver) With More Features Than LM3421
    LM3430Vin 6V To 40V, Adds DHC, LLP-12 Package
    LM3481Vin 2.97V To 48V
    LM5020Vin 13V To 100V



    Typical Application
    click for larger image


    Block Diagram
    click for larger image



    Typical Performance
    click for larger image


    Parameters / ValuesLM5022 LM3430 LM3481 LM5020
    Input Min Voltage6 Volt 6 Volt 2.97 Volt 13 Volt
    Input Max Voltage60 Volt 40 Volt 48 Volt 100 Volt
    Adjustable OutputYes Yes Yes Yes
    Feedback Voltage1.25 Volt 1.25 Volt 1.275 Volt 1.25 Volt
    Efficiency (peak)90 % 94 % 85 %
    Frequency Min200 kHz 200 kHz 100 kHz 50 kHz
    Frequency Max2000 kHz 2000 kHz 1000 kHz 1000 kHz
    Adj Switch FrequencyYes Yes Yes Yes
    Sync PinYes Yes Yes Yes
    On/Off PinYes No Yes Yes
    SoftStartYes Yes Yes Yes
    PowerGood / Error FlagNo No No No
    TopologyBoost, Sepic Boost Boost, SEPIC, Flyback Flyback, Inverting, Buck, Boost, Forward
    Step-DownNo No No Yes
    Step-UpYes Yes Yes Yes
    InvertingNo No No Yes
    FlybackNo No Yes Yes
    RegTypeSwitching Controller Switching Controller Switching Controller Switching Controller
    Multiple Output CapabilityNo No Yes Yes
    Temperature Min-40 deg C -40 deg C -40 deg C -40 deg C
    Temperature Max125 deg C 125 deg C 125 deg C 125 deg C
    AutomotiveNo Yes Yes
    PowerWiseYes Yes Yes

    Datasheets
    TitleSizeDateOther
    Language
    LM5022 60V Low Side Controller for Boost and SEPIC579
    Kbytes
    3-Oct-11日本語  


    Application Notes
    TitleSizeDateOther
    Language
    AN-1557: Application Note 1557 LM5022 Evaluation Board513
    Kbytes
    22-May-08 中文
    AN-1605: Application Note 1605 LM5022 Boost LED Driver Evaluation Board769
    Kbytes
    2-Oct-07 
    AN-1696: Application Note 1696 Designing a Boost LED Driver Using the LM5022286
    Kbytes
    22-Feb-08 中文
    AN-1656: Application Note 1656 Design Challenges of Switching LED Drivers203
    Kbytes
    18-Oct-07日本語
    中文


    Other Technical Documents
    TitleTypeDate
    Driving LEDs: To Cap or Not to CapPower Designer 2007-03-21

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM5022MM/NOPB

    LM5022MM

    RoHS Status


    MINI SOIC
    Full production
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    ARROWWorldwide1885
    DIGI-KEYWorldwide2544
    FARNELLEurope and Asia999
    MOUSERWorldwide995
    NEWARKAmericas143
    RS COMPONENTSWorldwide600
    RSL MICROAsia Pacific5000
    TAYLORAmericas8184
    $1.13 each at 1K+ pcsreel
    of
    1000
    LM5022MME/NOPB


    RoHS Status


    MINI SOIC
    Full production
    Lead Time: 8 weeks

     
    DistributorRegionQty
    ARROWWorldwide250
    AVNET-EMWorldwide500
    DIGI-KEYWorldwide0
    TAYLORAmericas250
    $1.13 each at 1K+ pcsreel
    of
    250
    LM5022MMX/NOPB

    LM5022MMX

    RoHS Status


    MINI SOIC
    Full production
    Lead Time: 8 weeks

     
    DistributorRegionQty
    AVNET-EMWorldwide3500
    DIGI-KEYWorldwide0
    $1.13 each at 1K+ pcsreel
    of
    3500

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LM5022.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LM5022 is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM5022BSTBLDT
    evaluation boardFull production


     

    Contact your distributor
    CALLN/A

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM5022EVAL/NOPB

    60V Low Side Controller for Boost Evaluation BoardFull production
    Lead Free (RoHS)

     
    DistributorRegionQty
    AVNET-EMWorldwide2
    DIGI-KEYWorldwide0
    MOUSERWorldwide2
    $57.00 each1

    LM5022 60V Low Side Controller for Boost and SEPIC

    Features:

    • Internal 60V Startup Regulator
    • 1A Peak MOSFET Gate Driver
    • VIN Range 6V to 60V
    • Duty Cycle Limit of 90%
    • Programmable UVLO with Hysteresis
    • Cycle-by-Cycle Current Limit
    • External Sychronizable (AC-coupled)
    • Single Resistor Oscillator Frequency Set
    • Slope Compensation
    • Adjustable Soft-start
    • MSOP-10 Package

    Applications:

    • Boost Converter
    • SEPIC Converter

    LM5022 Package Includes:

    • A fully assembled LM5022 Boost evaluation board
    • LM5022 datasheet
    • LM5022 Boost eval board App note AN-1557

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM5022SEPBLDT
    evaluation boardFull production


     

    Contact your distributor
    CALLN/A



    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    LM5022MM/NOPB

    LM5022MM
    29.841
    30.002
    MINI SOIC101
    1
    260
    260
    DetailDownloadN/A
    ZXTT
    5022
    LM5022MME/NOPB

    29.841
    MINI SOIC101260DetailDownloadN/A
    ZXTT
    5022
    LM5022MMX/NOPB

    LM5022MMX
    29.841
    30.002
    MINI SOIC101
    1
    260
    260
    DetailDownloadN/A
    ZXTT
    5022

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LM5022.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LM5022 is located at RoHS Status.

    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    LM5022MMABCD150XV1038680025950002736338335
    LM5022MMEABCD150XV1038680025950002736338335
    LM5022MMXABCD150XV1038680025950002736338335

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LM5022.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LM5022 is located at RoHS Status.

    Power for Portable Applications (Boost, Buck-Boost, & Integrated)
    Loading video...


    Automotive LED Lighting Challenges & Solutions
    Loading video...


    Power for Portable Applications (Boost, Buck-Boost, & Integrated)
    Date: 2008-01-15
    Length: 0:4:25
    Automotive LED Lighting Challenges & Solutions
    Date: 2009-04-14
    Length: 0:35:00
    [Information as of 9-Feb-2012]