| |
LM4917 -
LM4917 Ground-Referenced, 95mW Stereo Headphone Amplifier
|
|
|---|
Features
| | Ground referenced outputs |
| | High PSRR |
| | Available in space-saving TSSOP package |
| | Ultra low current shutdown mode |
| | Improved pop & click circuitry eliminates noises during turn-on and turn-off transitions |
| | 1.4 - 3.6V operation |
| | No output coupling capacitors, snubber networks, bootstrap capacitors |
| | Shutdown either channel independently |
Key Specification
| Improved PSRR at 1kHz | 70dB (typ) |
Power Output at VDD = 3V, RL = 16 , THD <= 1% | 95mW (typ) |
| Shutdown Current | 0.01µA (typ) |
General Description
The LM4917 is a stereo, output capacitor-less headphone amplifier capable of delivering 95mW of continuous average power into a 16 load with less than 1% THD+N from a single 3V power supply. More...
Applications
| | Notebook PCs |
| | Desktop PCs |
| | Mobile Phone |
| | PDAs |
| | Portable electronic devices |
| |
Typical Application
click for larger image
| Parameters | Values |
| Power@ 16Ohms, 1% THD |
0.097 Watt |
| Power@ 32Ohms, 1% THD |
0.082 Watt |
| Power@ 16Ohms, 10% THD |
0.108 Watt |
| Power@ 32Ohms, 10% THD |
0.108 Watt |
| THD |
0.02 % |
| PSRR |
70 dB |
| SNR |
100 dB |
| Channels |
2 Channels |
| THD Conditions |
Po=50mW, f=1kHz, Rl=32 Ohms |
| PSRR Conditions |
Vripple=200mW, f=1kHz |
| SNR Conditions |
RL=32 Ohms, Pout=20mW, f=1kHz |
| User Supply |
3 Volt |
| Shutdown Type |
Independent Low |
| Supply Range |
+1.4 - +3.6 V |
| Temperature Min |
-40 deg C |
| Temperature Max |
85 deg C |
Typical Performance
click for larger image
| |
Block Diagram
*click for larger image
| |
Datasheet
Package Availability, Models, Samples & Pricing
General Description
The LM4917 is a stereo, output capacitor-less headphone amplifier capable of delivering 95mW of continuous average power into a 16 load with less than 1% THD+N from a single 3V power supply.
The LM4917 provides high quality audio reproduction with minimal external components. A ground referenced output eliminates the output coupling capacitors typically required by single-ended loads, reducing component count, cost and board space consumption. This makes the LM4917 ideal for mobile phones and other portable equipment where board space is at a premium. Eliminating the output coupling capacitors also improves low frequency response.
The LM4917 operates from a single 1.4V to 3.6V power supply, features low 0.02% THD+N and 70dB PSRR. Independent right/left channel low-power shutdown controls provide power saving flexibility for mono/stereo applications. Superior click and pop suppression eliminates audible transients during start up and shutdown. Short circuit and thermal overload protection protects the device during fault conditions.
[Information as of 8-Nov-2009]
|
|