National Semiconductor | High-performance Analog

 

 LM48557   

Mono, Bridge-Tied Load, Ceramic Speaker Driver with I2C Volume Control and Reset
Click link to Download

Features

  • Integrated Charge Pump
  • Bridge-tied Load Output
  • Differential Input
  • High PSRR
  • I 2C Volume and Mode Control
  • Reset Input
  • Advanced Click-and-Pop Suppression
  • Low Supply Current
  • Minimum external components
  • Micro-power shutdown
  • Available in space-saving 16-bump micro SMD package
  • Description

    The LM48557 is a single supply, mono, ceramic speaker driver with an integrated charge-pump, designed for portable devices, such as cell phones and portable media players, where board space is at a premium. The LM48557 charge pump allows the device to deliver 5.8VRMS from a single 4.2V supply.

    The LM48557 features high power supply rejection ratio (PSRR), 80dB at 217Hz, allowing the device to operate in noisy environments without additional power supply conditioning. Flexible power supply requirements allow operation from 2.7V to 4.5V. The LM48557 features an active low reset input that reverts the device to its default state. Additionally, the LM48557 features a 36-step I 2C volume control and mute function. The low power Shutdown mode reduces supply current consumption to 0.01µA.

    The LM48557’s superior click and pop suppression eliminates audible transients on power-up/down and during shutdown. The LM48557 is available in an ultra-small 16-bump micro SMD package (1.965mmx1.965mm).

    Key Specification
    Output Voltage at VDD = 4.2V   RL = 1µF +22Ω, THD+N 1% 5.8VRMS (typ)


    Applications

  • Mobile phones
  • PDAs
  • Notebook Electronic Devices
  • MP3 Players



  • Typical Application
    click for larger image


    Connection Diagram
    click for larger image



    Typical Performance
    click for larger image


     

    ParametersValues
    Load Conditions RL = 1μF + 22Ω
    Supply Min 1.7 Volt
    Supply Max 4.5 Volt
    THD 0.05 %
    THD Conditions VO = 4VRMS, f = 1kHz, AV = 48dB
    Shutdown Type Low

    Datasheets
    TitleSizeDateOther
    Language
    LM48557 Mono, Bridge-Tied Load, Ceramic Speaker Driver with I2C Volume Control and Reset624
    Kbytes
    9-Mar-10   

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM48557TL/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 12 weeks

    Samples
    DistributorRegionQty
    DIGI-KEYWorldwide698
    MOUSERWorldwide490
    $0.85 each at 1K+ pcsreel
    of
    250
    LM48557TLX/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 12 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $0.85 each at 1K+ pcsreel
    of
    3000
    LM48557UR/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 6 weeks

    Samples

    Contact your distributor
    CALLreel
    of
    N/A
    LM48557UREVAL

    RoHS Status
    Preliminary
    Lead Time: N/A

     

    Contact your distributor
    CALLN/A
    LM48557URX/NOPB


    RoHS Status


    MICRO SMD
    Full production
    Lead Time: 6 weeks

     

    Contact your distributor
    CALLreel
    of
    N/A

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LM48557.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LM48557 is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LM48557TLEVAL
    LM48557TLEVAL Demo BoardFull production


     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    CALLN/A

    Description:

    The LM48557 is a single supply, mono, ceramic speaker driver with an integrated charge-pump, designed for portable devices, such as cell phones and portable media players, where board space is at a premium. The LM48557 charge pump allows the device to deliver 5.8VRMS from a single 4.2V supply.

    The LM48557 features high power supply rejection ratio (PSRR), 80dB at 217Hz, allowing the device to operate in noisy environments without additional power supply conditioning. Flexible power supply requirements allow operation from 2.7V to 4.5V. The LM48557 features an active low reset input that reverts the device to its default state. Additionally, the LM48557 features a 36-step I2C volume control and mute function. The low power Shutdown mode reduces supply current consumption to 0.01?

    This LM48557TLEVAL is an evaluation kit designed to ease the evaluation effort during the development of a circuit using the LM48557TLEVAL. Instructions to use the L48557TLEVAL demo board are contained in the LM48557 Data Sheet.

    Features:

    • Integrated Charge Pump
    • Bridge-tied Load Output
    • Differential Input
    • High PSRR
    • I2C Volume and Mode Control
    • Reset Input
    • Advanced Click-and-Pop Suppression
    • Low Supply Current
    • Minimum external components
    • Micro-power shutdown
    • Available in space-saving 16-bump ?D package

    Applications:

    • Mobile Phones and Multimedia Terminals
    • Smart Phones
    • PDAs, Internet Appliances and Portable Gaming
    • Portable DVD Players
    • Digital Still Cameras/Camcorders
    • Portable Notebooks, Laptops

    Contents:

    • A fully assembled Audio Power Amplifier evaluation board
    • A fully assembled USB I2C daughter card
    • 1 USB I2C Cable

    The user interface software can be found on the Digital Audio Evaluation Boards support page

    Resources:




    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    LM48557TL/NOPB

    4.813
    MICRO SMD161260DetailDownloadN/A
    XYTT
    I GM2
    LM48557TLX/NOPB

    4.813
    MICRO SMD161260DetailDownloadN/A
    XYTT
    I GM2
    LM48557UR/NOPB

    N/A
    MICRO SMD161260DetailDownloadN/A
    XYTT
    I GN5
    LM48557UREVAL
    sample kit/groupN/A
    -
    LM48557URX/NOPB

    N/A
    MICRO SMD161260DetailDownloadN/A
    XYTT
    I GN5

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LM48557.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LM48557 is located at RoHS Status.

    CAD Symbols and Models
    Download LM48557 CAD Symbols
     Models
    N/A


    [Information as of 9-Feb-2012]