Factory EEPROM set output voltages from 0.8V to 3.3V in 100 mV increments
Maximum load current of 3A
Voltage Mode Control
Internal type-three compensation
Switching frequency of 550 kHz
Low standby current of 12 µA
Internal 40 m MOSFET switches
Standard voltage options 0.8/1.0/1.2/1.5/1.8/2.5/3.0/3.3 volts
Exposed pad TSSOP-14 package
Description
The LM2853 synchronous SIMPLE SWITCHER® buck regulator is a 550 kHz step-down switching voltage regulator capable of driving up to a 3A load with excellent line and load regulation. The LM2853 accepts an input voltage between 3.0V and 5.5V and delivers a customizable output voltage that is factory programmable from 0.8V to 3.3V in 100mV increments. Internal type-three compensation enables a low component count solution and greatly simplifies external component selection. The exposed-pad TSSOP-14 package enhances the thermal performance of the LM2853.
Factory EEPROM set output voltages from 0.8V to 3.3V in 100 mV increments
Maximum load current of 3A
Voltage mode Control
Internal type-three compensation
Switching frequency of 550 kHz
Low standby current of 12 µA
Applications:
Low voltage point of load regulaton
Local solution for FPGA/DSP/ASIC core power
Broadband networking and communications infrastructure
National Semiconductor follows the provisions of the Product Stewardship Guide for Customers
(CSP-9-111C1)
and Banned Substances and Materials of Interest Specification
(CSP-9-111S2)
for regulatory environmental compliance. Details may be found at:
www.national.com/en/packaging/greennopb.html.
Lead free products are RoHS compliant.
Lead Free product status is available through the search tool located
here
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click here.