National Semiconductor | High-performance Analog

 

 DS92LV3221   

20-50 MHz 32-Bit Channel Link II Serializer
Click link to Download

Features

  • Wide Operating Range Embedded Clock SER/DES
  • Up to 32-bit parallel LVCMOS data
  • 20 to 50 MHz parallel clock
  • Up to 1.6 Gbps application data paylod
  • Simplified Clocking Architecture
  • No separate serial clock line
  • No reference clock required
  • Receiver locks to random data
  • On-chip Signal Conditioning for Robust Serial Connectivity
  • Transmit Pre-Emphasis
  • Data randomization
  • DC-balance encoding
  • Receive channel deskew
  • Supports up to 10m CAT-5 at 1.6Gbps
  • Integrated LVDS Terminations
  • Built-in AT-SPEED BIST for end-to-end system testing
  • AC-coupled interconnect for isolation and fault protection
  • > 4KV HBM ESD protection
  • Space-saving 64-pin TQFP package
  • Full industrial temperature range : -40° to +85°C
  • Description

    The DS92LV3221 (SER) serializes a 32-bit data bus into 2 embedded clock LVDS serial channels for a data payload rate up to 1.6 Gbps over cables such as CATx, or backplanes FR-4 traces. The companion DS92LV3222 (DES) deserializes the 2 LVDS serial data channels, de-skews channel-to-channel delay variations and converts the LVDS data stream back into a 32-bit LVCMOS parallel data bus.

    On-chip data Randomization/Scrambling and DC balance encoding and selectable serializer Pre-emphasis ensure a robust, low-EMI transmission over longer, lossy cables and backplanes. The Deserializer automatically locks to incoming data without an external reference clock or special sync patterns, providing an easy “plug-and-lock” operation.

    By embedding the clock in the data payload and including signal conditioning functions, the Channel-Link II SerDes devices reduce trace count, eliminate skew issues, simplify design effort and lower cable/connector cost for a wide variety of video, control and imaging applications. A built-in AT-SPEED BIST feature validates link integrity and may be used for system diagnostics.


    Applications

  • Industrial imaging (Machine-vision) and control
  • Security & Surveillance cameras and infrastructure
  • Medical imaging


  • LV3241 Typ Connection Diag

     

    ParametersValues
    Function Serializer
    Total Throughput 1600 Mbps
    Payload/Channel 1600 Mbps
    Signal Conditioning Pre-emphasis
    Clock Min 20 MHz
    Clock Max 50 MHz
    Input Compatibility TTL
    Output Compatibility LVDS
    Standard RS-232
    Reference Clock Req'd Deserializer No
    Start/Stop Bit Yes
    Power Consumption_ 380 mW
    Reach 12
    SupplyVoltage 3.3 Volt
    Special Features Cable De-skew
    Eval Kit LV32EVK01
    ESD 4 kV
    Temperature Min -40 deg C
    Temperature Max 85 deg C
    Parallel Bus Width 32 bits
    Number Transmitters 1
    Number Receivers 0
    JTAG1149.1 No
    Automotive No
    PowerWise No
    Communications Yes
    Sensing & Imaging Yes

    Datasheets
    TitleSizeDateOther
    Language
    DS92LV3221 20-50 MHz 32-Bit Channel Link II Serializer1443
    Kbytes
    16-Feb-10   


    Application Notes
    TitleSizeDateOther
    Language
    AN-2007: Application Note 2007 Improving the Robustness of Channel Link Designs with Channel Link II Ser/Des164
    Kbytes
    17-Feb-10 
    AN-1909: Application Note 1909 DS15BA101 and DS15EA101 Enable Long Reach Applications for Embedded Clock SER/DES360
    Kbytes
    2-Mar-09 中文


    Other Technical Documents
    TitleTypeDate
    Channel Link II Design GuideDesign Guide 2011-01-21
    Simplifying the Embedded Video Interface (with Channel Link II and FPGA-Link SerDes)External Article 2010-07-21

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    DS92LV3221TVS/NOPB


    RoHS Status


    TQFP
    Preliminary
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    DIGI-KEYWorldwide251
    MOUSERWorldwide140
    $5.50 each at 1K+ pcstray
    of
    160

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS92LV3221.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS92LV3221 is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LV32EVK01/NOPB

    LV32EVK01 Evaluation KitPreliminary
    Lead Free (RoHS)

     
    DistributorRegionQty
    AVNET-EMWorldwide5
    DIGI-KEYWorldwide2
    MOUSERWorldwide1
    $250.00 each1

    Description:

    The LV32EVK01 is an easy to use evaluation kit for the DS92LV3221, DS92LV3222, DS92LV3241 and DS92LV3242 Channel Link II Serializers and Deserializers. This kit allows for the evaluation of high speed data links ranging from 640 Mbps to 2.72 Gbps over low cost cables.

    The transmitter board accepts 32 bits of LVCMOS data signals from an incoming data source along with the clock signal. The serializer converts the LVCMOS parallel lines into four serialized CML data pairs with an embedded clock. Additional encoding, including data randomization, DC- Balancing and bit shuffling, allow the serializer to connect to the deserializer through AC-coupled interfaces.

    The receiver board accepts the CML serialized data streams with embedded clock and converts the data back into parallel LVCMOS data signals and clock. The embedded clock allows the deserializer to lock onto the incoming data without the need for a reference clock or oscillator. The deserializer also features an integrated deskew circuit which allows the device to compensate for large amounts of cable skew in the serial interconnect.

    Features:

    • Up to 32-bit parallel LVCMOS data
    • 20 to 85 MHz parallel clock
    • Selectable Serial LVDS Bus Width
    • Dual Lane Mode (20 to 50 MHz)
    • Quad Lane Mode (40 to 85 MHz)
    • On-chip Signal Conditioning for Robust Serial Connectivity
    • Transmit Pre-Emphasis
    • Data randomization
    • DC-balance encoding
    • Receive channel deskew
    • On board RJ45 connector for easy evaluation of low cost cable
    • Integrated LVDS Terminations
    • AC-coupled interconnect for isolation and fault protection
    • > 4KV HBM ESD protection
    • Space-saving 64-pin TQFP package
    • Full industrial temperature range : -40° to +85°C

    Contents:

    • DS92LV3241 20-85 MHz 32-Bit Channel Link II Serializer with evaluation board
    • DS92LV3242 20-85 MHz 32-Bit Channel Link II Deserializer with evaluation
    • CAT-6 cable

    Other Resources




    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    DS92LV3221TVS/NOPB

    274.78
    TQFP643260DetailN/AN/A
    NSUZXYYTTE#
    DS92LV3221
    TVS

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS92LV3221.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS92LV3221 is located at RoHS Status.

    CAD Symbols and Models
    N/A
     Models
    N/A


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    DS92LV3221TVSCMOS70213010015840003449464325

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS92LV3221.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS92LV3221 is located at RoHS Status.

    Channel Link II & III SerDes for Imaging & Display Applications
    Loading video...


    What's New in Signal Path -- November 09
    Loading video...


    Channel Link II & III SerDes for Imaging & Display Applications
    Date: 2010-07-28
    Length: 0:05:31
    What's New in Signal Path -- November 09
    Date: 2009-12-07
    Length: 0:08:13
    [Information as of 9-Feb-2012]