National Semiconductor | High-performance Analog

 

 DS90UB903Q   

10 - 43MHz 18 Bit Color FPD-Link III Serializer with Bidirectional Control Channel
Click link to Download

Features

  • 10 MHz to 43 MHz input PCLK support
  • 210 Mbps to 903 Mbps data throughput
  • Single differential pair interconnect
  • Bidirectional control interface channel with I 2C support
  • Embedded clock with DC Balanced coding to support AC-coupled interconnects
  • Capable to drive up to 10 meters shielded twisted-pair
  • I 2C compatible serial interface
  • Single hardware device addressing pin
  • Up to 4 General Purpose Input (GPI)/ Output (GPO)
  • LOCK output reporting pin and AT-SPEED BIST diagnosis feature to validate link integrity
  • Integrated termination resistors
  • 1.8V- or 3.3V-compatible parallel bus interface
  • Single power supply at 1.8V
  • ISO 10605 ESD and IEC 61000-4-2 ESD compliant
  • Automotive grade product: AEC-Q100 Grade 2 qualified
  • Temperature range −40°C to +105°C
  • No reference clock required on Deserializer
  • Programmable Receive Equalization
  • EMI/EMC Mitigation
  • DES Programmable Spread Spectrum (SSCG) outputs
  • DES Receiver staggered outputs
  • Description

    The DS90UB903Q/DS90UB904Q chipset offers a FPD-Link III interface with a high-speed forward channel and a bidirectional control channel for data transmission over a single differential pair. The DS90UB903Q/904Q incorporates differential signaling on both the high-speed forward channel and bidirectional control channel data paths. The Serializer/ Deserializer pair is targeted for direct connections between graphics host controller and displays modules. This chipset is ideally suited for driving video data to displays requiring 18-bit color depth (RGB666 + HS, VS, and DE) along with bidirectional control channel bus. The primary transport converts 21 bit data over a single high-speed serial stream, along with a separate low latency bidirectional control channel transport that accepts control information from an I 2C port. Using National’s embedded clock technology allows transparent full-duplex communication over a single differential pair, carrying asymmetrical bidirectional control channel information in both directions. This single serial stream simplifies transferring a wide data bus over PCB traces and cable by eliminating the skew problems between parallel data and clock paths. This significantly saves system cost by narrowing data paths that in turn reduce PCB layers, cable width, and connector size and pins.

    In addition, the Deserializer inputs provide equalization control to compensate for loss from the media over longer distances. Internal DC balanced encoding/decoding is used to support AC-Coupled interconnects.

    The Serializer is offered in a 40-pin lead in LLP and Deserializer is offered in a 48-pin LLP packages.


    Applications

  • Automotive Display Systems
  • Central Information Displays
  • Navigation Displays
  • Rear Seat Entertainment
  • Touch Screen Displays
  • Also Recommended
    DS90UB904QCompanion Deserializer


    Applications Diagram

    Parameters / ValuesDS90UB903Q DS90UB904Q
    Color Depth18 bpp 18 bpp
    Pixel Clock Min10 MHz 10 MHz
    Pixel Clock Max43 MHz 43 MHz
    FunctionSerializer Deserializer
    Output CompatibilityCML LVCMOS
    Control ChannelI2C, GPO I2C. GPI
    EMI ReductionRBS Coding SSCG, Staggered Outputs
    Signal ConditioningDC Balance Programmable Equalizer
    DiagnosticsBIST BIST
    Input CompatibilityLVCMOS CML
    Parallel Bus Width21 bits 21 bits
    Total Throughput900 Mbps 900 Mbps
    AEC Q-100 Automotive Grade2 2
    Temperature Min-40 deg C -40 deg C
    Temperature Max105 deg C 105 deg C

    Datasheets
    TitleSizeDateOther
    Language
    DS90UB903Q 10 - 43MHz 18 Bit Color FPD-Link III Serializer with Bidirectional Control Channel907
    Kbytes
    14-Jan-11   


    Application Notes
    TitleSizeDateOther
    Language
    AN-2173: Application Note 2173 I2C Communication Over FPD-Link III with Bidirectional Control Channel247
    Kbytes
    14-Jul-11 

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    DS90UB903QSQ/NOPB

    Auto Grade 2
    RoHS Status


    LLP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $5.85 each at 1K+ pcsreel
    of
    1000
    DS90UB903QSQE/NOPB

    Auto Grade 2
    RoHS Status


    LLP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide731
    MOUSERWorldwide239
    $5.85 each at 1K+ pcsreel
    of
    250
    DS90UB903QSQX/NOPB

    Auto Grade 2
    RoHS Status


    LLP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $5.85 each at 1K+ pcsreel
    of
    2500

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90UB903Q.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90UB903Q is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    SERDESUB-21USB/NOPB

    FPD Link III - DS90UB903Q & DS90UB904Q EVKPreliminary
    Lead Free (RoHS)

     
    DistributorRegionQty
    MOUSERWorldwide2
    CALLN/A

    Description:

    The SERDESUB-21USB is an evaluation kit designed to demonstrate performance and capabilities of the DS90UB903Q and DS90UB904Q FPD-Link III Serializer/Deserializer chipset. The chipset enables transmission of a high-speed video data along with a low latency bidirectional control bus over a single twisted pair cable. The integrated control channel transfers data simultaneously over the same serial video link.

    The DS90UB903Q Serializer board accepts LVCMOS input signals along with a low latency bidirectional control bus and provides a single serialized FPD-Link III LVDS data pair as an output. The DS90UB904Q Deserializer board accepts FPD-Link III LVDS serialized data stream and converts the data back into parallel LVCMOS signals along with a bidirectional control bus. A USB cable is provided as a generic medium for the high speed data link. The I2C interface allows communication and configuration features of the Serializer and Deserializer.

    Features:

    • 10 MHz to 43 MHz input PCLK support
    • Single differential pair interconnect
    • Bidirectional control interface channel with I2C support
    • Embedded clock with DC Balanced coding to support AC-coupled interconnects
    • Capable to drive up to 10 meters shielded twisted-pair
    • LOCK output reporting pin and AT-SPEED BIST diagnosis feature to validate link integrity
    • Integrated termination resistors
    • 1.8V - or 3.3V-compatible parallel bus interface
    • Single power supply at 1.8V
    • No reference clock required on Deserializer
    • Programmable Receive Equalization
    • EMI/EMC Mitigation

    Contents:

    • One Serializer board with the DS90UB903Q
    • One Deserializer board with the DS90UB904Q
    • One 2-meter high speed USB 2.0 cable assembly
    • Evaluation Kit Documentation



    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    DS90UB903QSQ/NOPB

    99.658
    LLP403260DetailN/AN/A
    NS
    UZXYTTE#
    UB903QSQ
    DS90UB903QSQE/NOPB

    99.658
    LLP403260DetailN/AN/A
    NS
    UZXYTTE#
    UB903QSQ
    DS90UB903QSQX/NOPB

    99.658
    LLP403260DetailN/AN/A
    NS
    UZXYTTE#
    UB903QSQ

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90UB903Q.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90UB903Q is located at RoHS Status.

    CAD Symbols and Models
    N/A
     Models
    N/A


    DS90UB90x FPD-Link III SerDes Multi-Camera Demo
    Loading video...


    DS90UB90x FPD-Link III SerDes Single Camera Demo
    Loading video...


    Intro to FPD-Link III SerDes with Bidirectional Control Channel for Auto Infotainment
    Loading video...


    DS90UB90x FPD-Link III SerDes Multi-Camera Demo
    Date: 2010-10-06
    Length: 00:02:52
    DS90UB90x FPD-Link III SerDes Single Camera Demo
    Date: 2010-10-06
    Length: 00:03:10
    Intro to FPD-Link III SerDes with Bidirectional Control Channel for Auto Infotainment
    Date: 2010-03-26
    Length: 00:48:14
    [Information as of 7-Feb-2012]