National Semiconductor | High-performance Analog

 

 DS90CF384A   

+3.3V LVDS Receiver 24-Bit Flat Panel Display (FPD) Link - 65MHz
Click link to Download

Features

  • 20 to 65 MHz shift clock support
  • 50% duty cycle on receiver output clock
  • Best–in–Class Set & Hold Times on RxOUTPUTs
  • Rx power consumption <142 mW (typ) @65MHz Grayscale
  • Rx Power-down mode <200μW (max)
  • ESD rating >7 kV (HBM), >700V (EIAJ)
  • Supports VGA, SVGA, XGA and Dual Pixel SXGA.
  • PLL requires no external components
  • Compatible with TIA/EIA-644 LVDS standard
  • Low profile 56-lead or 48-lead packages
  • Description

    The DS90CF384A receiver converts the four LVDS data streams (Up to 1.8 Gbps throughput or 227 Megabytes/sec bandwidth) back into parallel 28 bits of CMOS/TTL data (24 bits of RGB and 4 bits of Hsync, Vsync, DE and CNTL). Also available is the DS90CF364A that converts the three LVDS data streams (Up to 1.3 Gbps throughput or 170 Megabytes/sec bandwidth) back into parallel 21 bits of CMOS/TTL data (18 bits of RGB and 3 bits of Hsync, Vsync and DE). Both Receivers' outputs are Falling edge strobe. A Rising edge or Falling edge strobe transmitter (DS90C383A/DS90C363A) will interoperate with a Falling edge strobe Receiver without any translation logic.

    The DS90CF384A / DS90CF364A devices are enhanced over prior generation receivers and provided a wider data valid time on the receiver output.

    This chipset is an ideal means to solve EMI and cable size problems associated with wide, high speed TTL interfaces.

    Also Recommended
    DS90CF383BCompanion Serializer
    DS90CF38685 Mhz Transmit Clock Frequency
    DS90CF384AQAutomotive Grade (AEC-Q100 Qualified)

    Parameters / ValuesDS90CF384A DS90CF383B DS90CF386 DS90CF384AQ
    FunctionReceiver Transmitter Receiver Receiver
    Color Depth24 bpp 24 bpp 24 bpp 8 bpp
    Pixel Clock Max65 MHz 65 MHz 85 MHz 65 MHz
    Pixel Clock Min20 MHz 20 MHz 20 MHz 20 MHz
    Output CompatibilityLVCMOS LVDS LVCMOS LVCMOS
    Total Throughput1820 Mbps 1820 Mbps 2380 Mbps 1820 Mbps
    Payload/Channel455 Mbps 455 Mbps 595 Mbps 455 Mbps
    Supply Voltage3.3 Volt 3.3 Volt 3.3 Volt 3.3 Volt
    Temperature Min-10 deg C -10 deg C -10 deg C
    Temperature Max70 deg C 70 deg C 70 deg C
    Sensing & ImagingYes Yes Yes No
    DisplayTypeFPD FPD FPD FPD
    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    DS90CF384AMTD/NOPB

    DS90CF384AMTD

    RoHS Status


    TSSOP
    Full production
    Lead Time: 8 weeks

    Samples
    DistributorRegionQty
    DIGI-KEYWorldwide5
    MOUSERWorldwide178
    RS COMPONENTSWorldwide1
    $2.14 each at 1K+ pcsrail
    of
    34
    DS90CF384AMTDX/NOPB

    DS90CF384AMTDX

    RoHS Status


    TSSOP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    AVNET-EMWorldwide1000
    DIGI-KEYWorldwide0
    RSL MICROAsia Pacific2000
    $2.14 each at 1K+ pcsreel
    of
    1000

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS90CF384ASLC
    NONE
    NONE
    03 Mar 2004
    DS90CF384ASLCX
    NONE
    NONE
    03 Mar 2004

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90CF384A.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90CF384A is located at RoHS Status.

    Part Number(s)
    (NSID)
    DescriptionAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    FLINK3V8BT-85/NOPB

    Evaluation Kit for FPD-Link Family of Serializer and Deserializer LVDS DevicesPreliminary
    Lead Free (RoHS)

     
    DistributorRegionQty
    AVNET-EMWorldwide1
    DIGI-KEYWorldwide0
    MOUSERWorldwide2
    $500.00 each1

    Description:

    FPD-Link evaluation kit contains a Transmitter (Tx) board, a Receiver (Rx) board along with interfacing cables. This kit will demonstrate the chipsets interfacing from test equipment or a graphics controller using Low Voltage Differential Signaling (LVDS) to a receiver board.

    The Transmitter board accepts LVTTL/LVCMOS RGB signals from the graphics controller along with the clock signal. The LVDS Transmitter converts the LVTTL/LVCMOS parallel lines into four serialized LVDS data pairs plus a LVDS clock. The serial data streams toggle at 3.5 times the clock rate.

    The Receiver board accepts the LVDS serialized data streams plus clock and converts the data back into parallel LVTTL/LVCMOS RGB signals and clock for the panel timing controller.

    Contents:

    What the user needs to provide:

    The user needs to provide the proper RGB inputs and clock to the transmitter and also provide a proper interface from the receiver output to the panel timing controller or test equipment. A cable conversion board or harness scramble may be necessary depending on type of cable/connector interface used. A power down feature is also provided that reduces current draw when the link is not required.




    National Semiconductor follows the provisions of the Product Stewardship Guide for Customers (CSP-9-111C1) and Banned Substances and Materials of Interest Specification (CSP-9-111S2) for regulatory environmental compliance. Details may be found at: www.national.com/en/packaging/greennopb.html. Lead free products are RoHS compliant.

    Lead Free product status is available through the search tool located here

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    DS90CF384AMTD/NOPB

    DS90CF384AMTD
    222.11
    223
    TSSOP562
    2
    260
    235
    DetailDownloadN/A
    NS2ZXYTTE#
    DS90CF384AMTD
    BBBBB
    DS90CF384AMTDX/NOPB

    DS90CF384AMTDX
    222.11
    223
    TSSOP562
    2
    260
    235
    DetailDownloadN/A
    NS2ZXYTTE#
    DS90CF384AMTD
    BBBBB

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90CF384A.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90CF384A is located at RoHS Status.

    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    DS90CF384AMTD.350202750015150003429885386
    DS90CF384AMTDX.350202750015150003429885386

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90CF384A.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90CF384A is located at RoHS Status.

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS90CF384ASLC
    NONE
    NONE
    03 Mar 2004
    DS90CF384ASLCX
    NONE
    NONE
    03 Mar 2004

    [Information as of 9-Feb-2012]