Features DC - 3.125 Gbps low jitter, low skew, low power operation Pin and SMBus configurable, fully differential, non-blocking architecture Pin (two levels) and SMBus (four levels) selectable pre-emphasis and equalization eliminate ISI jitter Wide Input Common Mode Range enables easy interface to CML and LVPECL drivers ^LOS circuitry detects open inputs fault condition On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space. The DS25CP114 eliminates the on-chip input termination for added design flexibility. 8 kV ESD on LVDS I/O pins protects adjoining components Small 6 mm x 6 mm LLP-40 space saving package Description The DS25CP104A and DS25CP114 are 3.125 Gbps 4x4 LVDS crosspoint switches optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. The switch configuration can be accomplished via external pins or the System Management Bus (SMBus) interface. The DS25CP104A and DS25CP114 feature four levels (Off, Low, Medium, High) of transmit pre-emphasis (PE) and four levels (Off, Low, Medium, High) of receive equalization (EQ) settable via the SMBus interface. Off and Medium PE levels and Off and Low EQ levels are settable with the external pins. In addition, the SMBus circuitry enables the loss of signal ( ^LOS) monitors that can inform a system of the presence of an open inputs condition (e.g. disconnected cable). Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. On the DS25CP104A each differential input and output is internally terminated with a 100Ω resistor to lower return losses, reduce component count and further minimize board space. For added design flexibility the 100Ω input terminations on the DS25CP114 have been eliminated. This enables a designer to build custom crosspoint configurations and distribution circuits that require a limited multidrop signaling topology. Applications SD/HD/3G HD SDI Routers OC-48 / STM-16 InfiniBand and FireWire

Typical Application click for larger image	Block Diagram click for larger image
Typical Performance click for larger image

Datasheets

Title		Size	Date	Other Language
	DS25CP114 3.125 Gbps 4x4 LVDS Crosspoint Switch with Transmit Pre-Emphasis and Receive Equalization	604 Kbytes	17-May-11	日本語

Part Number(s) (NSID)	Top View	Availability	Current Reported Stock	Budgetary Pricing	Pack Size
DS25CP114TSQ/NOPB RoHS Status	LLP	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$8.75 each at 1K+ pcs	reel of 250
DS25CP114TSQE/NOPB RoHS Status	LLP	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 406 MOUSER Worldwide 250	$8.75 each at 1K+ pcs	reel of 250
DS25CP114TSQX/NOPB RoHS Status	LLP	Full production Lead Time: 6 weeks	Distributor Region Qty DIGI-KEY Worldwide 0	$8.75 each at 1K+ pcs	reel of 2500

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for DS25CP114.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for DS25CP114 is located at RoHS Status.

Part Number(s) (NSID)	Weight (milligrams)	Type	Pins	MSL Rating	Peak Reflow	RoHS Status	CAD Symbols	Models	Package Marking Format
DS25CP114TSQ/NOPB	99.658 N/A	LLP	40	3	260	Detail	N/A	N/A	NS UZXYTTE# 2CP114SQ
DS25CP114TSQE/NOPB	99.658	LLP	40	3	260	Detail	N/A	N/A	NS UZXYTTE# 2CP114SQ
DS25CP114TSQX/NOPB	99.658 N/A	LLP	40	3	260	Detail	N/A	N/A	NS UZXYTTE# 2CP114SQ

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for DS25CP114.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for DS25CP114 is located at RoHS Status.

CAD Symbols and Models N/A

Models N/A

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
DS25CP114TSQ	BICMOS8B+	0	3632	0	0	2762292	2	783807897
DS25CP114TSQE	BICMOS8B+	0	3632	0	0	2762292	2	783807897
DS25CP114TSQX	BICMOS8B+	0	3632	0	0	2762292	2	783807897

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for DS25CP114.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for DS25CP114 is located at RoHS Status.