8 levels of equalization settable by 3 pins or through the SMBus interface
DC-Coupled inputs and outputs
Optimized for operation from 250 Mbps to 2.25 Gbps in support of UXGA, 480 I/P, 720 I/P, 1080 I, and 1080 P with 8, 10, and
12–bit Color Depth Resolutions
Two DS16EV5110A devices support DVI/HDMI Dual Link
DVI 1.0, and HDMI 1.3a Compatible TMDS Interface
Clock channel signal detect (LOS)
Enable for power savings standby mode
System Management Bus (SMBus) provides control of boost, output amplitude, enable, and clock channel signal detect threshold
Low power consumption: 475mW (Typical)
0.13 UI total jitter at 1.65 Gbps including cable
Single 3.3V power supply
Small 7mm x 7mm, 48-pin leadless LLP package
-40°C to +85°C operating temperature range
Extends TMDS cable reach over:
> 40 meters 24 AWG DVI Cable (1.65Gbps)
> 20 meters 28 AWG DVI Cable (1.65Gbps)
> 20 meters Cat5/Cat5e/Cat6 cables (1.65Gbps)
> 20 meters 28 AWG HDMI cables (2.25Gbps)
Description
The DS16EV5110A is a multi-channel equalizer optimized for video cable extension Source/Repeater/Sink Applications. It operates
between 250Mbps and 2.25Gbps with common applications at 1.65Gbps and 2.25Gbps (per data channel). It contains three Transition-Minimized
Differential Signaling (TMDS) data channels and one clock channel as specified for DVI and HDMI interfaces. It provides compensation
for skin-effect and dielectric losses, a common phenomenon when transmitting video on commercially available high definition
video cables.
The inputs conform to DVI and HDMI requirements and features programmable levels of input equalization. The programmable levels
of equalization provide optimal signal boost and reduces inter-symbol interference. Eight levels of boost are selectable via
a pin interface or by the optional System Management Bus.
The clock channel is optimized for clock rates of up to 225 MHz and features a signal detect circuit. To maximize noise immunity,
the DS16EV5110A features a signal detector with programmable thresholds. The threshold is adjustable through a System Management
Bus (SMBus) interface.
The DS16EV5110A may be used in Source Applications, Sink Applications, or as a Repeater.
The DS16EV5110A also provides support for system power management via output enable controls. Additional controls are provided
via the SMBus enabling customization and optimization for specific applications requirements. These controls include programmable
features such as output amplitude and boost controls as well as system level diagnostics.
The DS16EV5110A is a pin-for-pin replacement to the DS16EV5110. It features an enhanced CML output that presents a high impedance
when powered down.
The DS16EV51-AEVKD Dual/Single link DVI Cable Extender Demo Kit provides a complete DVI system extension solution using two National`s DS16EV5110A`s - Video Equalizers.
Two Molex DVI connectors are used as the input and the output connections for a dual or single link DVI system. This version of the kit demonstrates both a single link and a dual link DVI system.
The Analog Pins of a typical DVI link (R, G, B, Hsync, and Vsync) are not connected. The DDC signals, Hot Plug, 5V Power and 5V Ground are directly connected between the DVI connectors, making this demo kit HDCP compliant.
A 3.3V VCC 1-pin header (J4) and a GND 1-pin header (J5) are used for the power supply.
Alternately, an AC/DC power adapter (>800mA) is required for the evaluation kit to provide 5V DC voltage for easy portability. A 1.8 mm DC Power Jack is used to connect the AC/DC Power Adapter. National`s LP3965, a 3.3V, 1500mA, Fast, Ultra Low Dropout Linear Regulator, converts the 5V power supply voltage to a 3.3V power supply voltage that powers the DS16EV5110A`s.
Features:
Compatible with DTV Resolutions 480i, 480p, 720i, 720p, 1080i, 1080p (8 bit, 10 bit, 12 bit color depth)
Compatible with the Single Link Computer Resolutions of VGA, SVGA, XGA, SXGA, UXGA
Compatible with the Dual Link Computer Resolutions of QXGA, WQXGA
Supports TMDS DVI or HDMI Dual/Single Link
Adjustable rotary switch for easy custom EQ boost level setting to reach maximum length of TMDS Interface with HDMI, or DVI Cables
Single 3.3V Supply
Ultra Portable with AC/DC Power Adapter (not included in the kit)
500 mW Typical Power Consumption of each DS16EV5110A device
>6kV ESD Rating
-40 to 85C Industrial Temperature Range
The DS16EV5110A demo kit extends TMDS with the 28 AWG STP DVI cable as follows:
Format
Link
Resolution
Pixel bandwidth (MPixel/s) 60Hz LCD with 20% blanking
Per channel bandwidth (Gb/s) 60Hz LCD with 20% blanking
The DS16EV51-AEVKH HDMI Cable Extender Demo Kit provides a complete HDMI system extension solution using National`s DS16EV5110A - a Video Equalizer for HDMI cables.
Two HDMI female connectors are used as the input and the output connections for a HDMI system.
The DDC signals, Hot Plug, 5V Power and 5V Ground are directly connected between the HDMI connectors, making this demo kit HDCP compliant.
A 3.3V VCC 1-pin header (J4) and a GND 1-pin header (J5) are used for the power supply.
Alternately, an AC/DC power adapter (>800mA) is required for the evaluation kit to provide 5V DC voltage for easy portability. A 1.8mm DC Power Jack is used to connect the AC/DC Power Adapter. National`s LP3965, a 3.3V, 1500mA, Fast, Ultra Low Dropout Linear Regulator, converts the 5V power supply voltage to a 3.3V power supply voltage that powers the DS16EV5110A.
Features:
Compatible with DTV Resolutions 480i, 480p, 720i, 720p, 1080i, 1080p, and 1080p with 12 bit deep color depth.
Compatible with Computer Resolutions of VGA, SVGA, XGA, SXGA, UXGA
Supports TMDS HDMI Single Link
Adjustable rotary switch for easy custom EQ boost level setting to reach maximum length of TMDS Interface with Twisted Pair , HDMI, or DVI Cables
Single 3.3V Supply
Ultra Portable with AC/DC Power Adapter (not included in the kit)
500 mW Typical Power Consumption
> 6kV ESD Rating
-40 to 85C Industrial Temperature Range
The DS16EV5110A demo kit extends TMDS with the 28 AWG STP HDMI cable as follows:
Format
Resolution
Pixel bandwidth (MPixel/s) 60Hz LCD with 20% blanking
Per channel bandwidth (Gb/s) 60Hz LCD with 20% blanking
National Semiconductor follows the provisions of the Product Stewardship Guide for Customers
(CSP-9-111C1)
and Banned Substances and Materials of Interest Specification
(CSP-9-111S2)
for regulatory environmental compliance. Details may be found at:
www.national.com/en/packaging/greennopb.html.
Lead free products are RoHS compliant.
Lead Free product status is available through the search tool located
here
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click here.
DS22EV5110
