Features • DC - 1.5 Gbps low jitter, low skew, low power operation • Pin configurable, fully differential, non-blocking architecture • Wide Input Common Mode Voltage Range allows DC-coupled interface to LVDS, CML and LVPECL drivers • On-chip 100Ω input and output termination minimizes insertion and return losses, reduces component count and minimizes board space • 7 kV ESD on LVDS I/O pins protects adjoining components • Small SOIC-16 space saving package Description The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure exceptional signal integrity and noise immunity. The non-blocking architecture allows connections of any input to any output or outputs. Wide input common mode range allows the switch to accept signals with LVDS, CML and LVPECL levels; the output levels are LVDS. A very small package footprint requires a minimal space on the board while the flow-through pinout allows easy board layout. Each differential input and output is internally terminated with a 100Ω resistor to lower device return losses, reduce component count and further minimize board space. Applications • High-speed channel select applications • Clock and data buffering and muxing • SD/HD SDI Routers

MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

Typical Application click for larger image	Block Diagram click for larger image
Typical Performance click for larger image

Datasheet

Title		Size	Date	Other Language
	DS10CP152 1.5 Gbps 2X2 LVDS Crosspoint Switch	295 Kbytes	5-Mar-09	日本語

Featured Application Notes

Title		Size	Date	Other Language
	AN-1926: Application Note 1926 An Introduction to M-LVDS and Clock and Data Distribution Applications	344 Kbytes	4-Dec-08	中文

More Application Notes

Title		Size	Date	Other Language
	AN-1821: Application Note 1821 CPRI Repeater System	1497 Kbytes	15-May-08

Design Tools

Title	Size	Date
DS10CP152 Evaluation Board Instructions and Gerber Files

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
DS10CP152TMA	BICMOS8B+	0	1152	0	0	743900	5	211083656
DS10CP152TMAX	BICMOS8B+	0	1152	0	0	743900	5	211083656

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.