DP83849IF - PHYTER DUAL Industrial Temperature with Fiber Support (FX) and Flexible Port Switching Dual Port 10/100 Mb/s Ethernet Physical Layer Tranceiver
Datasheet Packaging Samples & Pricing Eval. Boards Reliability Design Tools Models Knowledge Base

Features
Low-power 3.3V, 0.18µm CMOS technology
Low power consumption <600mW Typical
3.3V MAC Interface
Auto-MDIX for 10/100 Mb/s
Energy Detection Mode
Flexible MII Port Assignment
Dynamic Integrity Utility
Dynamic Link Quality Monitoring
TDR based Cable Diagnostic and Cable Length Detection
Optimized Latency for Real Time Ethernet Operation
Reference Clock out
RMII Rev. 1.2 Interface (configurable)
SNI Interface (configurable)
MII Serial Management Interface (MDC and MDIO)
IEEE 802.3u MII
IEEE 802.3u Auto-Negotiation and Parallel Detection
IEEE 802.3u ENDEC, 10BASE-T transceivers and filters
IEEE 802.3u PCS, 100BASE-TX transceivers and filters
IEEE 802.3u 100BASE-FX Fiber Interface
IEEE 1149.1 JTAG
Integrated ANSI X3.263 compliant TP-PMD physical sub-layer with adaptive equalization and Baseline Wander compensation
Programmable LED support for Link, 10 /100 Mb/s Mode, Activity, Duplex and Collision Detect
Single register access for complete PHY status
10/100 Mb/s packet BIST (Built in Self Test)
80-pin TQFP package (12mm x 12mm)

 

General Description


The number of applications requiring Ethernet Connectivity continues to expand. More...


Applications


Medical Instrumentation
Factory Automation
Motor & Motion Control
Wireless Remote Base Station
General Embedded Applications

ParametersValues
Function PHY
Data Rate (Mbps) 10/100
Port Count Dual
Interface MII / RMII / SNI
Special Features FX support, Cable Diagnostics, Flex Port
JTAG1149.1 Yes
Temperature Min -40 deg C
Temperature Max 85 deg C
Supply Voltage 3.3 Volt

Additional Resources


Design Tools



Datasheet
RoHS Compliance Information Size in KbytesDate Click link below to Download
DP83849IF PHYTER® DUAL Industrial Temperature with Fiber Support (FX) and Flexible Port Switching Dual Port 10/100 Mb/s Ethernet Physical Layer Tranceiver 1715
Kbytes
23-Apr-09 Download

If you have trouble printing or viewing PDF file(s), see Printing Problems.


Package Availability, Models, Samples & Pricing
Part NumberPackageFactory Lead TimeModelsSamples &
Electronic
Orders
Budgetary PricingStd
Pack
Size
Package
Marking
Format
TypePinsSpec.MSL
Rating
Peak
Reflow
RoHS
Report
CAD
Symbols
WeeksQtyQty$US each
DP83849IFVS-EVKPHYTER DUAL Industrial Temperature with Fiber Support (FX) and Flexible Port Switching Dual Port 10/100 Mb/s Ethernet Physical Layer Transceiver (backwards compatible to DP83849IDVS-EVKPreliminaryN/A
 
Buy Now
1+$192.001-
N/AN/A
DP83849IFVSTQFP80NOPB
STD
3
3
260
260
RoHS Download Full production
dp83849.ibs
Samples
Buy Now
1K+$5.00tray
of
119
NSUZXYTTE#
DP83849IFVS
6 weeksN/A

General Description


The number of applications requiring Ethernet Connectivity continues to expand. Along with this increased market demand is a change in application requirements. Where single channel Ethernet used to be sufficient, many applications such as wireless remote base stations and industrial networking now require DUAL Port functionality for redundancy or system management.

The DP83849IF is a highly reliable, feature rich device perfectly suited for industrial applications enabling Ethernet on the factory floor. The DP83849IF features two fully independent 10/100 ports for multi-port applications. NATIONAL’s unique port switching capability also allows the two ports to be configured to provide fully integrated range extension, media conversion, hardware based failover and port monitoring.

The DP83849IF provides optimum flexibility in MPU selection by supporting both MII and RMII interfaces. The device also provides flexibility by supporting both copper and fiber media. In addition this device includes a powerful new diagnostics tool to ensure initial network operation and maintenance.

In addition to the TDR scheme, commonly used for detecting faults during installation, NATIONAL’s innovative cable diagnostics provides for real time continuous monitoring of the link quality. This allows the system designer to implement a fault prediction mechanism to detect and warn of changing or deteriorating link conditions.

With the DP83849IF, National Semiconductor continues to build on its Ethernet expertise and leadership position by providing a powerful combination of features and flexibility, easing Ethernet implementation for the system designer.

Reliability Metrics


Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
DP83849IFVSCMOS9T021600023971522680198425

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.


Design Tools


TitleSize in Kbytes Date Click link below to Download    
Ethernet Integrity Utility Tool for Support and Diagnostics     View    
DP83849 Reference Design     View    

If you have trouble printing or viewing PDF file(s), see Printing Problems.

Application Notes


TitleSize in Kbytes Date Click link below to Download
AN-1548: Application Note 1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance 161
Kbytes
2-Oct-07 Download
AN-1548 (Chinese): Application Note 1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance
680 Kbytes  
AN-1540: Application Note 1540 Power Measurement of Ethernet Physical Layer Products 170
Kbytes
2-Oct-07 Download
AN-1862: Application Note 1862 Reducing Radiated Emissions in Ethernet 10/100 LAN Applications 117
Kbytes
4-Jun-08 Download
AN-1881: Application Note 1881 Improving Electro-Magnetic Noise Immunity in Serial Communications Systems 110
Kbytes
28-Jul-08 Download
AN-1469: Application Note 1469 PHYTER® Design & Layout Guide 341
Kbytes
29-Apr-08 Download
AN-1469 (Chinese): Application Note 1469 PHYTER® Design & Layout Guide
484 Kbytes  
AN-1509: Application Note 1509 PhyterDual Flexible Port Switching 233
Kbytes
21-May-07 Download
AN-1509 (Chinese): Application Note 1509 PhyterDual Flexible Port Switching
384 Kbytes  
AN-1508: Application Note 1508 DP83849 Cable Diagnostics 796
Kbytes
4-Aug-06 Download
AN-1508 (Chinese): Application Note 1508 DP83849 Cable Diagnostics
524 Kbytes  
AN-1507: Application Note 1507 DP83848 and DP83849 100Mb Data Latency 575
Kbytes
4-Aug-06 Download
AN-1507 (Chinese): Application Note 1507 DP83848 and DP83849 100Mb Data Latency
350 Kbytes  

If you have trouble printing or viewing PDF file(s), see Printing Problems.

[Information as of 7-Nov-2009]