Offset binary or 2's complement output data format
Pin-compatible: ADC14155, ADC12C170, ADC11C125
48-pin LLP package, (7x7x0.8mm, 0.5mm pin-pitch)
Description
The ADC11C170 is a high-performance CMOS analog-to-digital converter capable of converting analog input signals into 11-Bit
digital words at rates up to 170 Mega Samples Per Second (MSPS). This converter uses a differential, pipelined architecture
with digital error correction and an on-chip sample-and-hold circuit to minimize power consumption and the external component
count, while providing excellent dynamic performance. A unique sample-and-hold stage yields a full-power bandwidth of 1.1
GHz. The ADC11C170 operates from dual +3.3V and +1.8V power supplies and consumes 747 mW of power at 170 MSPS.
The separate +1.8V supply for the digital output interface allows lower power operation with reduced noise. A power-down feature
reduces the power consumption to 5 mW while still allowing fast wake-up time to full operation. In addition there is a sleep
feature which consumes 50 mW of power and has a faster wake-up time.
The differential inputs provide a full scale differential input swing equal to 2 times the reference voltage. A stable 1.0V
internal voltage reference is provided, or the ADC11C170 can be operated with an external reference.
Clock mode (differential versus single-ended) and output data format (offset binary versus 2's complement) are pin-selectable.
A duty cycle stabilizer maintains performance over a wide range of input clock duty cycles.
The ADC11C170 is pin compatible with the ADC11C125, ADC12C170, and ADC14155.
It is available in a 48-lead LLP package and operates over the industrial temperature range of −40°C to +85°C.
This Design Kit is designed to ease evaluation and design-in of National Semiconductors ADC11C170 11-bit Analog-to-Digital Converter, which operates at speeds up 170 Msps.
The evaluation is intended for evaluating input frequencies greater than 150 MHz. For input frequencies below 150 MHz, the ADC11C170LFEB is recommended. The evaluation board can be used in either of two modes. In the Manual mode, suitable test equipment can be used with the board to evaluate the ADC11C170 performance. In the Computer mode, evaluation is simplified by connecting the board to the WaveVision 4.1a Data Capture Board (order number DATAACQ13), which is connected to a personal computer through a USB port and running WaveVision software, operating under Microsoft Windows. The software can perform an FFT on the captured data upon command and, in addition to a frequency domain plot, shows dynamic performance in the form of SNR, SINAD, THD, SFDR and ENOB.
This Design Kit is designed to ease evaluation and design-in of National Semiconductor's ADC11C170 11-bit Analog-to-Digital Converter, which operates at speeds up 170 Msps.
The evaluation is intended for evaluating input frequencies below 150 MHz. For input frequencies above 150 MHz, the ADC11C170HFEB is recommended.
The evaluation board can be used in either of two modes. In the Manual mode, suitable test equipment can be used with the board to evaluate the ADC11C170 performance. In the Computer mode, evaluation is simplified by connecting the board to the WaveVision 4.1a Data Capture Board (order number DATAACQ13), which is connected to a personal computer through a USB port and running WaveVision software, operating under Microsoft Windows. The software can perform an FFT on the captured data upon command and, in addition to a frequency domain plot, shows dynamic performance in the form of SNR, SINAD, THD, SFDR and ENOB.
Features:
Board comes fully assembled and tested
Single (+5V) supply needed
All ADC features can be exercised
Contents:
Evaluation Board
User's Guide
National Semiconductor follows the provisions of the Product Stewardship Guide for Customers
(CSP-9-111C1)
and Banned Substances and Materials of Interest Specification
(CSP-9-111S2)
for regulatory environmental compliance. Details may be found at:
www.national.com/en/packaging/greennopb.html.
Lead free products are RoHS compliant.
Lead Free product status is available through the search tool located
here
ADC12C170
