Features • DAC101S101Q is AEC-Q100 Grade 1 qualified and is manufactured on an Automotive Grade Flow. • Guaranteed Monotonicity • Low Power Operation • Rail-to-Rail Voltage Output • Power-on Reset to Zero Volts Output • Wide Temperature Range of −40°C to +125°C • Wide Power Supply Range of +2.7V to +5.5V • Small Packages • Power Down Feature Description The DAC101S101 is a full-featured, general purpose 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and consumes just 175 µA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The supply voltage for the DAC101S101 serves as its voltage reference, providing the widest possible output dynamic range. A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt. The low power consumption and small packages of the DAC101S101 make it an excellent choice for use in battery operated equipment. The DAC101S101 is a direct replacement for the AD5310 and is one of a family of pin compatible DACs, including the 8-bit DAC081S101 and the 12-bit DAC121S101. The DAC101S101 operates over the extended industrial temperature range of −40°C to +105°C while the DAC101S101Q operates over the Grade 1 automotive temperature range of −40°C to +125°C. The DAC101S101 is available in a 6-lead TSOT and an 8-lead MSOP and the DAC101S101Q is availabe in the 6-lead TSOT only. Key Specification Resolution 10 bits DNL +0.15, -0.05 LSB (typ) Output Settling Time 8 µs (typ) Zero Code Error 3.3 mV (typ) Full-Scale Error −0.06 %FS (typ) Power Consumption Normal Mode 0.63 mW (3.6V) / 1.41 mW (5.5V) typ Pwr Down Mode 0.14 µW (3.6V) / 0.33 µW (5.5V) typ Applications • Battery-Powered Instruments • Digital Gain and Offset Adjustment • Programmable Voltage & Current Sources • Programmable Attenuators • Automotive

Also Recommended DAC081S101▲ For 8 Bits DAC102S085▲ For 10 Bit 2 Channel DAC104S085▲ For 10 Bit 4 Channel DAC108S085▲ For 10 Bit 8 Channel DAC121S101▲ For 12 Bits MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

	Block Diagram click for larger image
Typical Performance click for larger image

Datasheet

Title		Size	Date	Other Language
	DAC101S101/DAC101S101Q 10-Bit Micro Power, RRO Digital-to-Analog Converter	455 Kbytes	20-Oct-09	日本語

Featured Application Notes

Title		Size	Date	Other Language
	AN-277: Application Note 277 The New MICRO-DAC Product Line for Microprocessor Systems	73 Kbytes	2-May-04
	AN-275: Application Note 275 CMOS D/A Converters Match Most Microprocessors	127 Kbytes	2-May-04
	AN-271: Application Note 271 Applying the New CMOS MICRO-DAC	230 Kbytes	4-Oct-04	日本語

More Application Notes

Title		Size	Date	Other Language
	AN-284: Application Note 284 Single-Supply Applications of CMOS MICRODACs	121 Kbytes	3-Oct-02

Design Tools

Title	Size	Date
Evaluation Board Users' Guide	545 Kbytes	28-Mar-2007

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
DAC101S101CIMK	CMOS7	0	18406	0	0	1089000	4	309006723
DAC101S101CIMKX	CMOS7	0	18406	0	0	1089000	4	309006723
DAC101S101CIMM	CMOS7	0	18406	0	0	1089000	4	309006723
DAC101S101CIMMX	CMOS7	0	18406	0	0	1089000	4	309006723
DAC101S101QCMK	CMOS7	0	18406	0	0	1089000	4	309006723
DAC101S101QCMKX	CMOS7	0	18406	0	0	1089000	4	309006723

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.