|
Features
LM78L05 in micro SMD package
Output voltage tolerances of ±5% over the temperature range
Output current of 100mA
Internal thermal overload protection
Output transistor safe area protection
Internal short circuit current limit
Available in plastic TO-92 and plastic SO-8 low profile packages
No external components
Output voltages of 5.0V, 6.2V, 8.2V, 9.0V, 12V, 15V
See AN-1112 for micro SMD considerations
Description The LM78LXX series of three terminal positive regulators is available with several fixed output voltages making them useful
in a wide range of applications. When used as a zener diode/resistor combination replacement, the LM78LXX usually results
in an effective output impedance improvement of two orders of magnitude, and lower quiescent current. These regulators can
provide local on card regulation, eliminating the distribution problems associated with single point regulation. The voltages
available allow the LM78LXX to be used in logic systems, instrumentation, HiFi, and other solid state electronic equipment.
The LM78LXX is available in the plastic TO-92 (Z) package, the plastic SO-8 (M) package and a chip sized package (8-Bump
micro SMD) using National's micro SMD package technology. With adequate heat sinking the regulator can deliver 100mA output
current. Current limiting is included to limit the peak output current to a safe value. Safe area protection for the output
transistors is provided to limit internal power dissipation. If internal power dissipation becomes too high for the heat sinking
provided, the thermal shutdown circuit takes over preventing the IC from overheating.
|
Also Recommended
| LM3480▲ | Better Line/Load/Dropout Voltage |
|
|
