|
Features
Standard Reset Threshold voltage: 3.08V
Custom Reset Threshold voltages: For other voltages between 2.2V and 5.0V in 10mV increments, contact National Semiconductor Corp.
No external components required
Manual-Reset input
RESET# (LM3710) or RESET (LM3711) outputs
Precision supply voltage monitor
Factory programmable Reset and Watchdog Timeout Delays
Separate Power Fail comparator
Available in micro SMD package for minimum footprint
±0.5% Reset threshold accuracy at room temperature
±2% Reset threshold accuracy over temperature extremes
Reset assertion down to 1V VCC (RESET# option only)
28 µA VCC supply current
Description The LM3710/LM3711 series of microprocessor supervisory circuits provide the maximum flexibility for monitoring power supplies and battery controlled functions in systems without backup batteries. The LM3710/LM3711 series are available in MSOP-10 and 9-bump micro SMD packages.
Built-in features include the following:
Reset: Reset is asserted during power-up, power-down, and brownout conditions. RESET# is guaranteed down to VCC of 1.0V.
Manual Reset Input: An input that asserts reset when pulled low.
Power-Fail Input: A 1.225V threshold detector for power fail warning, or to monitor a power supply other than VCC.
Low Line Output: This early power failure warning indicator goes low when the supply voltage drops to a value which is 2% higher than the reset threshold voltage.
Watchdog Timer: The WDI (Watchdog Input) monitors one of the µP's output lines for activity. If no output transition occurs during the watchdog timeout period, reset is activated.
Applications
Embedded Controllers and Processors
Intelligent Instruments
Automotive Systems
Critical µP Power Monitoring
| 
