National Semiconductor | High-performance Analog

 

 DS90C363   

+3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link - 65 MHz [Not recommended for new designs]
Click link to Download

Features

  • 20 to 65 MHz shift clock support
  • Programmable Transmitter (DS90C363) strobe select (Rising or Falling edge strobe)
  • Single 3.3V supply
  • Chipset (Tx + Rx) power consumption < 250 mW (typ)
  • Power-down mode (< 0.5 mW total)
  • Single pixel per clock XGA (1024×768) ready
  • Supports VGA, SVGA, XGA and higher addressability.
  • Up to 170 Megabyte/sec bandwidth
  • Up to 1.3 Gbps throughput
  • Narrow bus reduces cable size and cost
  • 290 mV swing LVDS devices for low EMI
  • PLL requires no external components
  • Low profile 48-lead TSSOP package
  • Falling edge data strobe Receiver
  • Compatible with TIA/EIA-644 LVDS standard
  • ESD rating > 7 kV
  • Operating Temperature: −40°C to +85°C
  • Description

    The DS90C363 transmitter converts 21 bits of CMOS/TTL data into three LVDS (Low Voltage Differential Signaling) data streams. A phase-locked transmit clock is transmitted in parallel with the data streams over a fourth LVDS link. Every cycle of the transmit clock 21 bits of input data are sampled and transmitted. The DS90CF364 receiver converts the LVDS data streams back into 21 bits of CMOS/TTL data. At a transmit clock frequency of 65 MHz, 18 bits of RGB data and 3 bits of LCD timing and control data (FPLINE, FPFRAME, DRDY) are transmitted at a rate of 455 Mbps per LVDS data channel. Using a 65 MHz clock, the data throughputs is 170 Mbytes/sec. The Transmitter is offered with programmable edge data strobes for convenient interface with a variety of graphics controllers. The Transmitter can be programmed for Rising edge strobe or Falling edge strobe through a dedicated pin. A Rising edge Transmitter will inter-operate with a Falling edge Receiver (DS90CF364) without any translation logic.

    This chipset is an ideal means to solve EMI and cable size problems associated with wide, high speed TTL interfaces.

    Also Recommended
    DS90C363AImproved Timing Specs

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    DS90C363MTD/NOPB

    DS90C363MTD

    RoHS Status


    TSSOP
    Not recommended for new designs
    (as of 18-Jun-07)
    Lead Time: 8 weeks

     
    DistributorRegionQty
    AVNET-EMWorldwide36
    DIGI-KEYWorldwide1882
    MOUSERWorldwide84
    NEWARKAmericas58
    $3.71 each at 1K+ pcsrail
    of
    38
    DS90C363MTDX/NOPB

    DS90C363MTDX

    RoHS Status


    TSSOP
    Not recommended for new designs
    (as of 18-Jun-07)
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $3.71 each at 1K+ pcsreel
    of
    1000

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS90C363AMTD
    NONE
    NONE
    31 Oct 2004
    DS90C363AMTDXL
    NONE
    NONE
    31 Oct 2004

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90C363.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90C363 is located at RoHS Status.

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    DS90C363MTD/NOPB

    DS90C363MTD
    201.231
    202.002
    TSSOP482
    2
    260
    235
    DetailN/AN/A
    NS2ZXYTTE#
    DS90C363MTD
    BBBBB
    DS90C363MTDX/NOPB

    DS90C363MTDX
    201.231
    202.002
    TSSOP482
    2
    260
    235
    DetailN/AN/A
    NS2ZXYTTE#
    DS90C363MTD
    BBBBB

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90C363.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90C363 is located at RoHS Status.

    CAD Symbols and Models
    N/A
     Models
    N/A


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    DS90C363MTD.350202750015150003429885386
    DS90C363MTDX.350202750015150003429885386

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS90C363.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS90C363 is located at RoHS Status.

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS90C363AMTD
    NONE
    NONE
    31 Oct 2004
    DS90C363AMTDXL
    NONE
    NONE
    31 Oct 2004

    [Information as of 9-Feb-2012]