Features
CPU Features
| • | Fully static RISC processor core, capable of operating
from 0 to 24 MHz with zero wait/hold states
|
| • | Minimum 41.7 ns instruction cycle time with a 24-MHz internal clock frequency, based on a 12-MHz external input
|
| • | 30 independently vectored peripheral interrupts |
On-Chip Memory
| • | 256K bytes reprogrammable Flash program memory |
| • | 8K bytes Flash data memory |
| • | 10K bytes of static RAM data memory |
| • | Addresses up to 8 Mbytes of external memory |
Broad Range of Hardware Communications Peripherals
| • | Bluetooth Lower Link Controller (LLC) including a shared
4.5K byte Bluetooth RAM and 1K byte Bluetooth Sequencer
RAM |
| • | Full-speed USB node including seven Endpoint-FIFOs
conforming to USB 1.1 specification |
| • | ACCESS.bus serial bus (compatible with Philips I2C bus) |
| • | 8/16-bit SPI, Microwire/Plus serial interface |
| • | Universal Asynchronous Receiver/Transmitter (UART) |
| • | Advanced Audio Interface (AAI) to connect to external 8/
13-bit PCM Codecs as well as to ISDN-Controllers
through the IOM-2 interface (slave only) |
| • | CVSD/PCM converter supporting one bidirectional audio
connection |
General-Purpose Hardware Peripherals
| • | Dual 16-bit Multi-Function Timer |
| • | Versatile Timer Unit with four subsystems (VTU) |
| • | Four channel DMA controller |
| • | Timing and Watchdog Unit |
Flexible I/O
| • | Up to 37 general-purpose I/O pins (shared with on-chip
peripheral I/O pins) |
| • | Programmable I/O pin characteristics: TRI-STATE output,
push-pull output, weak pull-up input, high-impedance
input |
| • | Schmitt triggers on general purpose inputs |
| • | Multi-Input Wakeup |
Extensive Power and Clock Management Support
| • | On-chip Phase Locked Loop |
| • | Support for multiple clock options |
| • | Dual clock and reset |
| • | Power-down modes |
Power Supply
| • | I/O port operation at 2.5V to 3.3V |
| • | Core logic operation at 2.5V |
| • | On-chip power-on reset |
Temperature Range
| • | -40—C to +85—C (Industrial) |
Packages
| • | CSP-48, LQFP-100 |
Complete Development Environment
| • | Pre-integrated hardware and software support for rapid
prototyping and production |
| • | Integrated environment |
| • | Project manager |
| • | Multi-file C source editor |
| • | High-level C source debugger |
| • | Comprehensive, integrated, one-stop technical support |
Bluetooth Protocol Stack
| • | Applications can interface to the high-level protocols or
directly to the low-level Host Controller Interface (HCI) |
| • | Transport layer support allows HCI command-based interface
over UART or USB port |
| • | Baseband (Link Controller) minimizes the performance
demand on the CPU |
| • | Link Manager (LM) |
| • | Logical Link Control and Adaptation Protocol (L2CAP) |
| • | Service Discovery Protocol (SDP) |
| • | RFCOMM Serial Port Emulation Protocol |
| • | All packet types, piconet, and scatternet functionality
supported |
Description The CP3BT10 connectivity processor combines high performance
with the massive integration needed for embedded
Bluetooth applications. A powerful RISC core with on-chip
SRAM and Flash memory provides high computing bandwidth,
communications peripherals provide high I/O bandwidth,
and an external bus provides system expandability.
On-chip communications peripherals include: Bluetooth
Lower Link Controller, USB, ACCESS.bus, Microwire/SPI,
UART, and Advanced Audio Interface (AAI). Additional on
chip peripherals include DMA controller, CVSD/PCM conversion module, Timing and Watchdog Unit, Versatile Timer
Unit, Multi-Function Timer, and Multi-Input Wakeup.
Bluetooth hand-held devices can be both smaller and lower in cost for maximum consumer appeal. The low voltage and advanced power-saving modes achieve new design points in the trade-off between battery size and operating time for
handheld and portable applications.
In addition to providing the features needed for the next generation
of embedded Bluetooth products, the CP3BT10 is
backed up by the software resources designers need for
rapid time-to-market, including an operating system Bluetooth protocol stack implementation, reference designs, and an
integrated development environment. Combined with National's LMX5252 Bluetooth radio transceiver, the CP3BT10 provides a complete Bluetooth system solution.
National Semiconductor offers a complete and industry proven
application development environment for CP3BT10 applications, including the IAR Embedded Workbench, Development Board, iSYSTEM winIDEA and iC3000 Active Emulator, Bluetooth Development Board, Bluetooth Protocol Stack, and Application
Software.
|
|
