| • | Low cost 8-bit microcontroller |
| • | Fully static CMOS, with low current drain |
| • | Two power saving modes: HALT and IDLE |
| • | 1 µs instruction cycle time |
| • | 16 kbytes on-board OTP EPROM with security feature |
- Note:
- Up to 32 kbytes of OTP EPROM is available on request.
| • | 512 bytes on-board RAM |
| • | Single supply operation: 2.7V-5.5V |
| • | Full duplex UART |
| • | MICROWIRE/PLUS™ serial I/O |
| • | Idle Timer |
| • | Two 16-bit timers, each with two 16-bit registers supporting:
|
| • | Processor independent PWM mode |
| • | External event counter mode |
| • | Input capture mode |
| • | Four pulse train generators with 16-bit prescalers |
| • | Two 16-bit input capture modules with 8-bit prescalers |
| • | Multi-Input Wake Up (MIWU) with optional interrupts (8) |
| • | 8-bit Stack Pointer SP (stack in RAM) |
| • | Two 8-bit register indirect data memory pointers (B and X) |
| • | Fourteen multi-source vectored interrupts servicing
|
| • | External Interrupt |
| • | Idle Timer T0 |
| • | Two Timers (Each with 2 Interrupts) |
| • | MICROWIRE/PLUS |
| • | Multi-Input Wake Up |
| • | Software Trap |
| • | UART (2) |
| • | Default VIS |
| • | Capture Timers |
| • | Counters (one vector for all four counters) |
| • | Versatile instruction set |
| • | True bit manipulation |
| • | Memory mapped I/O |
| • | BCD arithmetic instructions |
| • | Multiply/Divide Functions |
| • | Package: 68-pin PLCC |
| • | Software selectable I/O options
|
| • | TRI-STATE® Output |
| • | Push-Pull Output |
| • | Weak Pull-Up Input |
| • | High Impedance Input |
| • | Schmitt trigger inputs on ports G and L |
| • | Temperature range: -40°C to +85°C |
| • | Form fit and function emulation device for the COP888GW |
| • | Real time emulation and full program debug offered by MetaLink Development System |
The COP87L88GW is a member of the COP8™ 8-bit OTP microcontroller family. It is pin and software compatible to the mask ROM COP888GW product family.
