|
Features
Wide dynamic range
IF sampling capability
300 MHz input bandwidth
Small 48-pin TSSOP
Single +5V supply
Low cost
Description The CLC5956 is a monolithic 12-bit, 65 MSPS analog-to-digital converter subsystem. The device has been optimized for use in cellular base stations and other applications where high resolution, high sampling rate, wide dynamic range, low power dissipation, and compact size are required. The CLC5956 features differential analog inputs, low jitter differential PECL clock inputs, a low distortion track-and-hold with DC to 300 MHz input bandwidth, a bandgap voltage reference, TTL compatible CMOS output logic, and a proprietary 12-bit multi-stage quantizer. The CLC5956 is fabricated on the ABIC-IV 0.8 micron BiCMOS process. The part features a 73 dB spurious free dynamic range (SFDR) and 67 dB SNR. The wideband track-and-hold allows sampling of IF signals to greater than 250 MHz. The part produces two-tone, dithered, spurious-free dynamic range of 83 dBFS at 75 MHz input frequency. The differential analog input provides excellent common-mode rejection, while the differential PECL clock inputs permit the use of balanced transmission to minimize jitter in distributed systems. The 48-pin TSSOP package provides an extremely small footprint for applications where space is a critical consideration. The CLC5956 operates from a single +5V power supply over the industrial temperature range of -40°C to +85°C. National thoroughly tests each part to verify full compliance with the guaranteed specifications.
Key Specification
Sample Rate |
65 MSPS |
SFDR |
73 dBc |
SFDR with dither |
85 dBFS |
SNR |
67 dB |
Low power consumption |
615 mW |
Applications
Cellular base-stations
Digital communications
Infrared/CCD imaging
IF sampling
Electro-optics
Instrumentation
Medical imaging
High definition video
|
|
