|
Features
SMPTE 292M, SMPTE 344M and SMPTE 259M compliant
Supports DVB-ASI at 270 Mbps
High data rates: 143 Mbps to 1.485 Gbps
Equalizes up to 140 meters of Belden 1694A at 1.485 Gbps or up to 350 meters of Belden 1694A at 270 Mbps
Manual bypass, cable length indicator, and output mute with a programmable threshold
Single-ended or differential input
50Ω differential outputs
Single 3.3V supply operation
208mW typical power consumption with 3.3V supply
Replaces the GS1524 and GS1524A
Description The CLC034 SMPTE 292M / 259M adaptive cable equalizer is a monolithic integrated circuit for equalizing data transmitted over
cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates
from 143 Mbps to 1.485 Gbps and supports SMPTE 292M, SMPTE 344M and SMPTE 259M.
The CLC034 implements DC restoration to correctly handle pathological data conditions. DC restoration can be bypassed for
low data rate applications. The equalizer is flexible in allowing either single-ended or differential input drive.
Additional features include a combined carrier detect and output mute pin which mutes the output when no signal is present.
A programmable mute reference is used to mute the output at a selectable level of signal degradation. A cable length indicator
is provided to determine the amount of cable being equalized.
Applications
SMPTE 292M, SMPTE 344M, and SMPTE 259M serial digital interfaces
Serial digital data equalization and reception
Data recovery equalization
|
Also Recommended
| LMH0034 | Use LMH0034 For New Designs - Increased Input Voltage Swing V(SDI) With Carrier Detect Enabled (Back |
| CLC002▲ | HD/SD SERIAL DIGITAL CABLE DRIVER |
| CLC030 | HD/SD DIGITAL VIDEO SERIALIZER W/ FIFOS AND INTEGRATED CABLE DRIVER |
| CLC031A | HD/SD DIGITAL VIDEO DESERIALIZER & DESCRAMBLER |
|
|
