Features
| • | Wide supply voltage range: 3V to 15V |
| • | High noise immunity: 0.45 VDD (typ.) |
| • | Wide range of digital and: ±7.5 VPEAK analog switching |
| • | "ON" resistance for 15V operation: 80 Ohm |
| • | Matched "ON" resistance: [DELTA]RON=5 Ohm (typ.) over 15V signal input |
| • | "ON" resistance flat over peak-to-peak signal range |
| • | High "ON"/"OFF": 65 dB (typ.) output voltage ratio: @ fis=10 kHz, RL=10 k Ohm |
| • | High degree linearity: 0.1% distortion (typ.): @ fis=1 kHz, Vis=5Vp-p,: VDD-VSS=10V, RL=10 k Ohm |
| • | Extremely low "OFF": 0.1 nA (typ.) switch leakage: @ VDD-VSS=10V, TA=25°C |
| • | Extremely high control input impedance: 1012 Ohm(typ.) |
| • | Low crosstalk: -50 dB (typ.) between switches: @ fis=0.9 MHz, RL=1 k Ohm |
| • | Frequency response, switch "ON": 40 MHz (typ.) |
Description The CD4066BM/CD4066BC is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It is pin-for-pin compatible with CD4016BM/CD4016BC, but has a much lower "ON" resistance, and "ON" resistance is relatively constant over the input-signal range.
Applications
| • | Analog signal switching/multiplexing • Signal gating • Squelch control • Chopper • Modulator/Demodulator • Commutating switch |
| • | Digital signal switching/multiplexing |
| • | CMOS logic implementation |
| • | Analog-to-digital/digital-to-analog conversion |
| • | Digital control of frequency, impedance, phase, and analog-signal-gain |
|
|
