National Semiconductor | High-performance Analog

 

 TL082   

Wide Bandwidth Dual JFET Input Operational Amplifier
Click link to Download

Features

Internally trimmed offset voltage:

15 mV

Low input bias current:

50 pA

Low input noise voltage:

16nV/SqrtHz

Low input noise current:

0.01 pA/SqrtHz

Wide gain bandwidth:

4 MHz

High slew rate:

13 V/µs

Low supply current:

3.6 mA

High input impedance:

1012

Low total harmonic distortion:

<=0.02%

Low 1/f noise corner:

50 Hz

Fast settling time to 0.01%:

2 µs

Description

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage (BI-FET II™ technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs.

These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth. The devices also exhibit low noise and offset voltage drift.

Also Recommended
LM8272Higher Bandwidth, Lower Power Consumption, RRIO,high Cap Drive.
LMP7702Higher Precision, RRIO, Higher CMRR, Lower Noise



Typical Application
click for larger image


Connection Diagram
click for larger image



Typical Performance
click for larger image


Parameters / ValuesTL082 LM8272 LMP7702
Gain Bandwidth4 MHz 13 MHz 2.5 MHz
Channels2 Channels 2 Channels 2 Channels
Input OutputTypeVcm to V+, Not R-R Out R-R In and Out R-R In and Out
Slew Rate13 Volts/usec 12 Volts/usec 1 Volts/usec
Supply Min12, 10 Volt 2.5 Volt 2.7 Volt
Supply Max36 Volt 24 Volt 12 Volt
Offset Voltage max, 25C15 mV 5 mV 0.22 mV
Supply Current Per Channel1.75 mA 0.9 mA 0.75 mA
PowerWise Rating 2437.5 uA/MHz 69.2 uA/MHz 300 uA/MHz
Max Input Bias Current8 nA 2700 nA 0.4 nA
Output Current17 mA 100 mA 66 mA
Voltage Noise25 nV/root(Hz) 15 nV/root(Hz) 9 nV/root(Hz)
Shut downNo No No
Special FeaturesJFET High Cload Drive Low Offset CMOS Input
FunctionOp Amp Op Amp Op Amp
Temperature Min0 deg C -40 deg C -40 deg C
Temperature Max70 deg C 85 deg C 125 deg C

Datasheets
TitleSizeDateOther
Language
TL082 Wide Bandwidth Dual JFET Input Operational Amplifier1105
Kbytes
19-Nov-04   


Application Notes
TitleSizeDateOther
Language
AN-447: Application Note 44776
Kbytes
4-Nov-95 

Part Number(s)
(NSID)
Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
Size
TL082CM/NOPB

TL082CM

RoHS Status


SOIC NARROW
Full production
Lead Time: 6 weeks

 
DistributorRegionQty
AVNET-EMWorldwide545
DIGI-KEYWorldwide1196
FARNELLEurope and Asia200
MOUSERWorldwide1023
NEWARKAmericas167
RS COMPONENTSWorldwide240
$0.39 each at 1K+ pcsrail
of
95
TL082CMX/NOPB

TL082CMX

RoHS Status


SOIC NARROW
Full production
Lead Time: 6 weeks

 
DistributorRegionQty
ARROWWorldwide2500
AVNET-EMWorldwide2500
DIGI-KEYWorldwide0
MOUSERWorldwide2475
TAYLORAmericas2500
$0.39 each at 1K+ pcsreel
of
2500
TL082CP/NOPB

TL082CP

RoHS Status


MDIP
Full production
Lead Time: 6 weeks

 
DistributorRegionQty
ARROWWorldwide560
AVNET-EMWorldwide760
DIGI-KEYWorldwide602
FARNELLEurope and Asia55
MOUSERWorldwide755
NEWARKAmericas297
TAYLORAmericas560
$0.51 each at 1K+ pcsrail
of
40

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for TL082.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for TL082 is located at RoHS Status.

Part Number(s)
(NSID)
Weight
(milligrams)
TypePinsMSL RatingPeak ReflowRoHS
Status
CAD SymbolsModelsPackage
Marking
Format
TL082CM/NOPB

TL082CM
69.761
70.001
SOIC NARROW81
1
260
235
DetailDownloadspice file
NSZXTT
TL
082CM
TL082CMX/NOPB

TL082CMX
69.761
70.001
SOIC NARROW81
1
260
235
DetailDownloadspice file
NSZXTT
TL
082CM
TL082CP/NOPB

TL082CP
508.252
510.002
MDIP81
1
NA
NA
DetailDownloadspice file
NSUZXYTTE#
TL082
CP

All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for TL082.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for TL082 is located at RoHS Status.

Design Tools
TitleSizeDate
Amplifiers Selection Guide software for Windows  

CAD Symbols and Models
Download TL082 CAD Symbols
 Models
spice file


Reliability Metrics
Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
TL082CMBIFET0128750010650004302196657
TL082CMXBIFET0128750010650004302196657
TL082CPBIFET0128750010650004302196657

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.


All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

Moisture Sensitivity Level Data for TL082.

A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

National's certificate of product compliance for TL082 is located at RoHS Status.

[Information as of 9-Feb-2012]