National Semiconductor | High-performance Analog

 

 SCAN92LV090   

9 Channel Bus LVDS Transceiver w/ Boundary SCAN
Click link to Download

Features
  • IEEE 1149.1 (JTAG) Compliant
  • Bus LVDS Signaling
  • Low power CMOS design
  • High Signaling Rate Capability (above 100 Mbps)
  • 0.1V to 2.3V Common Mode Range for VID = 200mV
  • ±100 mV Receiver Sensitivity
  • Supports open and terminated failsafe on port pins
  • 3.3V operation
  • Glitch free power up/down (Driver & Receiver disabled)
  • Light Bus Loading (5 pF typical) per Bus LVDS load
  • Designed for Double Termination Applications
  • Balanced Output Impedance
  • Product offered in 64 pin LQFP package and BGA package
  • High impedance Bus pins on power off (VCC = 0V)
  • Description

    The SCAN92LV090A is one in a series of Bus LVDS transceivers designed specifically for the high speed, low power proprietary backplane or cable interfaces. The device operates from a single 3.3V power supply and includes nine differential line drivers and nine receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The separate I/O of the logic side allows for loop back support. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.

    The driver translates 3V TTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation, while consuming minimal power with reduced EMI. In addition, the differential signaling provides common mode noise rejection of ±1V.

    The receiver threshold is less than ±100 mV over a ±1V common mode range and translates the differential Bus LVDS to standard (TTL/CMOS) levels.

    This device is compliant with IEEE 1149.1 Standard Test Access Port and Boundary Scan Architecture with the incorporation of the defined boundary-scan test logic and test access port consisting of Test Data Input (TDI), Test Data Out (TDO), Test Mode Select (TMS), Test Clock (TCK), and the optional Test Reset ( ^TRST).




    Typical Application
    *click for larger image


    Block Diagram
    *click for larger image


     

    ParametersValues
    PHY Type Transceiver
    Family B-LVDS
    Channels 9 Channels
    Max Data Rate 100 Mbps
    Input Compatibility LVTTL/LVDS
    Output Compatibility LVTTL/LVDS
    Power Consumption_ 429 mW
    Special Features Low Skew
    SupplyVoltage 3.3 Volt
    JTAG1149.1 Yes
    Temperature Min -40 deg C
    Temperature Max 85 deg C
    Function Transceiver

    Datasheets
    TitleSizeDateOther
    Language
    SCAN92LV090 9 Channel Bus LVDS Transceiver w/ Boundary SCAN355
    Kbytes
    8-Mar-07   

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    SCAN92LV090SLC/NOPB

    SCAN92LV090SLC

    RoHS Status


    FBGA
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $4.85 each at 1K+ pcstray
    of
    360
    SCAN92LV090VEH/NOPB


    RoHS Status


    LQFP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $4.80 each at 1K+ pcstray
    of
    160
    SCAN92LV090VEHX/NOPB


    RoHS Status


    LQFP
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $4.80 each at 1K+ pcsreel
    of
    1000

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for SCAN92LV090.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for SCAN92LV090 is located at RoHS Status.

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    SCAN92LV090SLC/NOPB

    SCAN92LV090SLC
    167.81
    170.841
    FBGA644
    3
    260
    235
    DetailDownloadN/A
    NSUZXYTTE#
    SCAN92LV090
    SLC
    SCAN92LV090VEH/NOPB

    347.98
    349.001
    LQFP643260DetailDownload
    ibis file
    NSUZXYYTTE#
    SCAN92LV090
    VEH
    SCAN92LV090VEHX/NOPB

    347.98
    349.001
    LQFP643260DetailDownload
    ibis file
    NSUZXYYTTE#
    SCAN92LV090
    VEH

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for SCAN92LV090.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for SCAN92LV090 is located at RoHS Status.

    CAD Symbols and Models
    Download SCAN92LV090 CAD Symbols
     Models
    N/A


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    SCAN92LV090SLCCMOS70213010015840003449464325
    SCAN92LV090VEHCMOS70213010015840003449464325
    SCAN92LV090VEHXCMOS70213010015840003449464325

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for SCAN92LV090.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for SCAN92LV090 is located at RoHS Status.

    [Information as of 9-Feb-2012]