National Semiconductor | High-performance Analog

 

 LPC661   

Low Power CMOS Operational Amplifier
Click link to Download

Features

(Typical unless otherwise noted)

  • Rail-to-rail output swing
  • Low supply current 55 µA
  • Specified for 100 kOhm and 5 kOhm loads
  • High voltage gain 120 dB
  • Low input offset voltage 3 mV
  • Low offset voltage drift 1.3 µV/°C
  • Ultra low input bias current 2 fA
  • Input common-mode range includes GND
  • Operating range from +5V to +15V
  • Low distortion 0.01% at 1 kHz
  • Slew rate 0.11 V/µs
  • Description

    The LPC661 CMOS operational amplifier is ideal for operation from a single supply. It features a wide range of operating supply voltage from +5V to +15V, rail-to-rail output swing and an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kOhm and 5 kOhm) are all equal to or better than widely accepted bipolar equivalents, while the supply current requirement is typically 55 µA.

    This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process.

    See the LPC660 datasheet for a Quad CMOS operational amplifier or the LPC662 data sheet for a Dual CMOS operational amplifier with these same features.


    Applications

  • High-impedance buffer
  • Precision current-to-voltage converter
  • Long-term integrator
  • High-impedance preamplifier
  • Active filter
  • Sample-and-Hold circuit
  • Peak detector
  •  

    ParametersValues
    Supply Min 5 Volt
    Supply Max 15 Volt
    Gain Bandwidth 0.35 MHz
    Slew Rate 0.11 Volts/usec
    Offset Voltage max, 25C 6 mV
    Max Input Bias Current 0.004 nA
    Input OutputType Vcm to V-, R-R Out
    Supply Current Per Channel 0.055 mA
    PowerWise Rating 2 157.1 uA/MHz
    Channels 1 Channels
    Output Current 21 mA
    Shut down No
    Special Features Undefined
    Voltage Noise 42 nV/root(Hz)
    Temperature Max 85 deg C
    Temperature Min -40 deg C
    Function Op Amp

    Datasheets
    TitleSizeDateOther
    Language
    LPC661 Low Power CMOS Operational Amplifier319
    Kbytes
    29-Aug-00日本語  

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    LPC661IM/NOPB

    LPC661IM

    RoHS Status


    SOIC NARROW
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    ARROWWorldwide805
    AVNET-EMWorldwide134
    DIGI-KEYWorldwide564
    FARNELLEurope and Asia604
    MOUSERWorldwide305
    NEWARKAmericas96
    TAYLORAmericas805
    $0.78 each at 1K+ pcsrail
    of
    95
    LPC661IMX/NOPB

    LPC661IMX

    RoHS Status


    SOIC NARROW
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    DIGI-KEYWorldwide0
    $0.78 each at 1K+ pcsreel
    of
    2500

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    LPC661AIM
    NONE
    NONE
    08 Sep 1998
    LPC661AIMX
    NONE
    NONE
    08 Sep 1998
    LPC661AIN
    NONE
    NONE
    08 Sep 1998
    LPC661AMN
    NONE
    NONE
    10 Mar 1998
    LPC661IN
    NONE
    NONE
    08 Sep 1998

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LPC661.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LPC661 is located at RoHS Status.

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    LPC661IM/NOPB

    LPC661IM
    69.761
    70.001
    SOIC NARROW81
    1
    260
    235
    DetailDownloadspice file
    NSZXTT
    LPC66
    1IM
    LPC661IMX/NOPB

    LPC661IMX
    69.761
    70.001
    SOIC NARROW81
    1
    260
    235
    DetailDownloadspice file
    NSZXTT
    LPC66
    1IM

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LPC661.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LPC661 is located at RoHS Status.

    Design Tools
    TitleSizeDate
    Amplifiers Selection Guide software for Windows  

    CAD Symbols and Models
    Download LPC661 CAD Symbols
     Models
    spice file


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    LPC661IMP2CMOS0508600145035002578995367
    LPC661IMXP2CMOS0508600145035002578995367

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for LPC661.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for LPC661 is located at RoHS Status.

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    LPC661AIM
    NONE
    NONE
    08 Sep 1998
    LPC661AIMX
    NONE
    NONE
    08 Sep 1998
    LPC661AIN
    NONE
    NONE
    08 Sep 1998
    LPC661AMN
    NONE
    NONE
    10 Mar 1998
    LPC661IN
    NONE
    NONE
    08 Sep 1998

    [Information as of 9-Feb-2012]