The LP5951 regulator is designed to meet the requirements of portable, battery-powered systems providing a regulated output
voltage and low quiescent current. When switched to shutdown mode via a logic signal at the Enable pin, the power consumption
is reduced to virtually zero.
The LP5951 is designed to be stable with small 1µF ceramic capacitors.
The LP5951 also features internal protection against short-circuit currents and over-temperature conditions.
Performance is specified for a -40°C to 125°C temperature range.
The device is available in SOT23-5 and SC70-5 package.
The device is available in fixed output voltages in the range of 1.3V to 3.3V. For availability, please contact your local
NSC sales office.
The LP5951 regulator is designed to meet the requirements of portable, battery-powered systems providing a regulated output voltage and low quiescent current. When switched to shutdown mode via a logic signal at the Enable pin, the power consumption is reduced to virtually zero.
The LP5951 is designed to be stable with small 1 microF/1.5microF ceramic capacitors.
The LP5951 also features internal protection against short-circuit currents and over-temperature conditions.
Performance is specified for a -40° C to 125° temperature range. The device is available in SOT23-5 and SC70-5 package.
The LP5951 evaluation board is designed to enable independent evaluation of the LP5951 electrical performance. Each board is pre-assembled and tested in the factory. The evaluation kits are available in two options: LP5951MF-1.8EV and LP5951MF-2.5EV. For other voltage and package options, the device can be ordered from the LP5951 product folder on National's website. The board offers two different assembly options: SC70-5 package (MG) on top side (TOP) or SOT23-5 package on bottom side (BOT) of the board. Only one side will be assembled at a time.
Features:
Excellent line transient response: plus or minus 2mV typ.
The LP5951 regulator is designed to meet the requirements of portable, battery-powered systems providing a regulated output voltage and low quiescent current. When switched to shutdown mode via a logic signal at the Enable pin, the power consumption is reduced to virtually zero.
The LP5951 is designed to be stable with small 1 microF/1.5microF ceramic capacitors.
The LP5951 also features internal protection against short-circuit currents and over-temperature conditions.
Performance is specified for a -40° C to 125° temperature range. The device is available in SOT23-5 and SC70-5 package.
The LP5951 evaluation board is designed to enable independent evaluation of the LP5951 electrical performance. Each board is pre-assembled and tested in the factory. The evaluation kits are available in two options: LP5951MF-1.8EV and LP5951MF-2.5EV. For other voltage and package options, the device can be ordered from the LP5951 product folder on National's website. The board offers two different assembly options: SC70-5 package (MG) on top side (TOP) or SOT23-5 package on bottom side (BOT) of the board. Only one side will be assembled at a time.
Features:
Excellent line transient response: plus or minus 2mV typ.
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click here.