(For V
+ = 5V and V
− = 0V, unless otherwise specified)
Guaranteed 2.7V and 5V performance
No crossover distortion
Industrial temperature range
−40°C to +85°C
Gain-bandwidth product
1 MHz
Low supply current
LMV321
130 μA
LMV358
210 μA
LMV324
410 μA
Rail-to-rail output swing @ 10 kΩ
V
+ −10 mV
V
− +65 mV
VCM
−0.2V to V
+−0.8V
Description
The LMV358/LMV324 are low voltage (2.7–5.5V) versions of the dual and quad commodity op amps, LM358/LMV324, which currently
operate at 5–30V. The LMV321 is the single version.
The LMV321/LMV358/LMV324 are the most cost effective solutions for the applications where low voltage operation, space saving
and low price are needed. They offer specifications that meet or exceed the familiar LM358/LMV324. The LMV321/LMV358/LMV324
have rail-to-rail output swing capability and the input common-mode voltage range includes ground. They all exhibit excellent
speed to power ratio, achieving 1 MHz of bandwidth and 1 V/µs of slew rate with low supply current.
The LMV321 is available in the space saving 5-Pin SC70, which is approximately half the size of the 5-Pin SOT23. The small
package saves space on PC boards, and enables the design of small portable electronic devices. It also allows the designer
to place the device closer to the signal source to reduce noise pickup and increase signal integrity.
The chips are built with National's advanced submicron silicon-gate BiCMOS process. The LMV321/LMV358/LMV324 have bipolar
input and output stages for improved noise performance and higher output current drive.
National Semiconductor offers this blank universal Evaluation Board to help you evaluate the performance of any low voltage, low power operational amplifier that is offered in the SC-70 package. Resistors, capacitors, or any other components can be easily mounted on this board. These components can be chosen from any of the following three popular sizes: 1206, 0805, and, 0603. The op amp can then be tested under the conditions of your choice.
The 551012922-001 Evaluation Board allows quick and easy evaluation of the part. You need only supply an analog input signaland a power supply to the evaluation board.
Features:
Universal for all low voltage, low power op amps.
Dual sided layout for different pin-outs.
Accommodates components of any of these sizes:
1206
0805
0603
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR.
The Long Term Failure Rates were calculated
at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress
temperature of 150°C to an application temperature of 55°C.
For more information on Reliability Metrics, please click here.