Features • Specified for 2 k and 600 loads • High voltage gain: 126 dB • Low offset voltage drift: 2.3 µV/°C • Ultra low input bias current: 40 fA • Input common-mode range includes V- • Operating range from +5V to +15V supply • ISS = 400 µA/amplifier; independent of V+ • Low distortion: 0.01% at 10 kHz • Slew rate: 1.1 V/µs • Improved performance over TLC272 Description The LMC6032 is a CMOS dual operational amplifier which can operate from either a single supply or dual supplies. Its performance features include an input common-mode range that reaches ground, low input bias current, and high voltage gain into realistic loads, such as 2 k and 600. This chip is built with National's advanced Double-Poly Silicon-Gate CMOS process. See the LMC6034 datasheet for a CMOS quad operational amplifier with these same features. For higher performance characteristics refer to the LMC662. Applications • High-impedance buffer or preamplifier • Current-to-voltage converter • Long-term integrator • Sample-and-hold circuit • Medical instrumentation

Also Recommended LMC6034▲ Quad Version MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

	Connection Diagram click for larger image
Typical Performance *click for larger image

Datasheet

Title		Size	Date	Other Language
	LMC6032 CMOS Dual Operational Amplifier	370 Kbytes	19-Oct-04	日本語

Featured Application Notes

Title		Size	Date	Other Language
	AN-1237: Application Note 1237 RSDS™ Flat Panel Display Design Guidelines Part 2	141 Kbytes	14-May-03

More Application Notes

Title		Size	Date	Other Language
	AN-1237: Application Note 1237 RSDS™ Flat Panel Display Design Guidelines Part 2	141 Kbytes	14-May-03

Design Tools

Title	Size	Date
Amplifiers Selection Guide software for Windows

Reliability Metrics

Part Number	Process	EFR Reject	EFR Sample Size	PPM	LTA Rejects	LTA Device Hours	FITS	MTTF (Hours)
LMC6032IM	P2CMOS	0	49735	0	1	4330000	2	556689228
LMC6032IMX	P2CMOS	0	49735	0	1	4330000	2	556689228
LMC6032IN	P2CMOS	0	49735	0	1	4330000	2	556689228

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.