Features
(For 5V Supply, Typ Unless Noted)
Rail-to-Rail input CMVR -0.25V to 5.25V
Rail-to-Rail output swing 0.01V to 4.99V
High gain-bandwidth, 10 MHz at 20 kHz
Slew rate 12 V/µs
Low supply current 360 µA/Amp
Wide supply range 2.7V to over 24V
CMRR 100 dB
Gain 100 dB with RL = 10k
PSRR 82 dB
Description The LM6132/34 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.
Operating on supplies from 2.7V to over 24V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.
Applications
Battery operated instrumentation
Instrumentation Amplifiers
Portable scanners
Wireless communications
Flat panel display driver
|
Also Recommended
| LM6144▲ | Improved Bandwidth, Improved Slew Rate, Supply Current, Input Bias Current And Output Current |
| LMH6644▲ | Lower Cost |
| LM6154▲ | Improved Bandwidth, Slew Rate, Supply Current, Input Bias Current And Output Current. |
|
|
LM6144
