LM10 - Operational Amplifier and Voltage Reference
Datasheet Packaging Samples & Pricing Design Tools Application Notes Knowledge Base

Features
input offset voltage: 2.0 mV (max)
input offset current: 0.7 nA (max)
input bias current: 20 nA (max)
reference regulation: 0.1% (max)
offset voltage drift: 2µV/°C
reference drift: 0.002%/°C

General Description


The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp.

The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270µA. More...


  Typical Application
click for larger image


ParametersValues
Supply Min 1.1 Volt
Supply Max 7, 45 Volt
Gain Bandwidth 0.05, 0.09 MHz
Channels 1 Channels
Supply Current Per Channel 0.3, 0.27, 0.28 mA
PowerWise Rating 2 5400, 3111.1, 3333.3 uA/MHz
Slew Rate 0.2 Volts/usec
Offset Voltage max, 25C 4, 2 mV
Max Input Bias Current 40, 30 nA
Input OutputType Vcm to V-, R-R Out
Output Current 20 mA
Voltage Noise 50 nV/root(Hz)
Shut down No
Special Features With Adj Reference
Temperature Min -40, 0 deg C
Temperature Max 85, 70 deg C
Function Op Amp with Reference


Typical Performance


click for larger image


  Additional Resources
Design Tools

Application Notes


Block Diagram


click for larger image



Datasheet
RoHS Compliance Information Size in KbytesDate Click link below to Download
LM10 Operational Amplifier and Voltage Reference 784
Kbytes
16-Sep-04 Download
LM10 Operational Amplifier and Voltage Reference (Japanese)
689 Kbytes   Download
LM10 Mil-Aero Datasheet MNLM10-X 12 Kbytes   Download

If you have trouble printing or viewing PDF file(s), see Printing Problems.


Package Availability, Models, Samples & Pricing
Part NumberPackageFactory Lead TimeModelsSamples &
Electronic
Orders
Budgetary PricingStd
Pack
Size
Package
Marking
Format
TypePinsSpec.MSL
Rating
Peak
Reflow
RoHS
Report
CAD
Symbols
WeeksQtyQty$US each
LM10CWMSOIC WIDE14NOPB
STD
3
2A
260
220
RoHS Download Full productionN/A
 
Buy Now
1K+$1.32rail
of
50
NSUZXYTTE#
LM10CWM
8 weeks500
LM10CWMXSOIC WIDE14NOPB
STD
3
2A
260
220
RoHS Download Full productionN/A
 
Buy Now
1K+$1.32reel
of
1000
NSUZXYTTE#
LM10CWM
6 weeks2500
LM10CLNMDIP8NOPB
STD
1
1
NA
NA
RoHS Download Full productionN/A
 
Buy Now
1K+$1.49rail
of
40
NSUZXYTTE#
LM10CLN
8 weeks1000
LM10CNMDIP8NOPB
STD
1
1
NA
NA
RoHS Download Full productionN/A
 
Buy Now
1K+$1.40rail
of
40
NSUZXYTTE#
LM
10CN
8 weeks1000
LM10BHTO-58NOPB
STD
1
1
NA
NA
RoHS Download Full productionN/A
 
Buy Now
250+$12.70box
of
500
NSZXYTTE# LM10BH
6 weeks1000
LM10CHTO-58NOPB
STD
1
1
NA
NA
RoHS Download Full productionN/A
 
Buy Now
1K+$4.41box
of
500
NSZXYTTE# LM10CH
6 weeks1000
5962-8760401GA
(LM10H/883)
TO-58RoHS Download Full productionN/A
 
Buy Now
50+$55.00tray
of
20
NS ZSSXXYYA LM10H/883 Q
5962-8760401GA
16 weeks500

Obsolete Versions

Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
LM10C MDC
NONE
NATIONAL SEMICONDUCTOR
03 Dec 2008
LM10CLH
NONE
NATIONAL SEMICONDUCTOR
03 Dec 2008
LM10H-MLS
NONE
NONE
08 Jun 1999

General Description


The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp.

The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270µA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20 mA output current with ±0.4V saturation. Reference output can be as low as 200 mV.

The circuit is recommended for portable equipment and is completely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications.

The device is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote comparator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage- and current-regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs.

This series is available in the three standard temperature ranges, with the commercial part having relaxed limits. In addition, a low-voltage specification (suffix "L") is available in the limited temperature ranges at a cost savings.

Design Tools


TitleSize in Kbytes Date Click link below to Download    
Amplifiers Selection Guide software for Windows     View    

If you have trouble printing or viewing PDF file(s), see Printing Problems.

Application Notes


TitleSize in Kbytes Date Click link below to Download
AN-288: Application Note 288 System-Oriented DC-DC Conversion Techniques 405
Kbytes
3-Oct-02 Download
AN-300: Application Note 300 Simple Circuit Detects Loss of 4-20 mA Signal 100
Kbytes
2-Oct-02 Download
AN-298: Application Note 298 Isolation Techniques for Signal Conditioning 379
Kbytes
2-Oct-02 Download
AN-299: Application Note 299 Audio Applications of Linear Integrated Circuits 232
Kbytes
24-Feb-99 Download
AN-211: Application Note 211 New Op Amp Ideas 620
Kbytes
2-Oct-02 Download
AN-460: Application Note 460 LM34/LM35 Precision Monolithic Temperature Sensors 306
Kbytes
20-Sep-02 Download
AN-460 (Japanese): Application Note 460 LM34/LM35 Precision Monolithic Temperature Sensors
322 Kbytes   Download
AN-247: Application Note 247 Using the ADC0808/ADC0809 8-Bit µP Compatible A/D Converters with 8-Channel Analog Multiplexer 547
Kbytes
3-Oct-02 Download

If you have trouble printing or viewing PDF file(s), see Printing Problems.

More Application Notes


TitleSize in Kbytes Date Click link below to Download
AN-241: Application Note 241 Working with High Impedance Op Amps 130
Kbytes
4-Oct-04 Download
AN-23: Application Note 23 The LM105-An Improved Positive Regulator 183
Kbytes
4-Oct-04 Download
AN-79: Application Note 79 IC Preamplifier Challenges Choppers on Drift 380
Kbytes
1-Oct-02 Download
AN-173: Application Note 173 IC Zener Eases Reference Design 54
Kbytes
1-Oct-02 Download
AN-71: Application Note 71 Micropower Circuits Using the LM4250 Programmable Op Amp 312
Kbytes
2-Oct-02 Download
AN-4: Application Note 4 Monolithic Op Amp-The Universal Linear Component 258
Kbytes
1-Oct-02 Download
AN-242: Application Note 242 Applying a New Precision Op Amp 383
Kbytes
4-Oct-04 Download
AN-29: Application Note 29 IC Op Amp Beats FETs on Input Current 444
Kbytes
1-Oct-02 Download
AN-706: Application Note 706 LM628/629 User Guide 332
Kbytes
26-Sep-02 Download
AN-127: Application Note 127 LM143 Monolithic High Voltage Operational Amplifier Applications 441
Kbytes
2-May-04 Download
AN-103: Application Note 103 LM340 Series Three Terminal Positive Regulators 421
Kbytes
3-Oct-02 Download
AN-178: Application Note 178 Applications for an Adjustable IC Power Regulator 40
Kbytes
3-Oct-02 Download
AN-286: Application Note 286 Applications of the LM392 Comparator Op Amp IC 135
Kbytes
2-Oct-02 Download
AN-240: Application Note 240 Wide-Range Current-to-Frequency Converters 126
Kbytes
3-Oct-02 Download
AN-30: Application Note 30 Log Converters 124
Kbytes
2-Oct-02 Download
AN-32: FET Circuit Applications 217
Kbytes
4-Nov-95 Download
AN-41: Application Note 41 Precision IC Comparator Runs from +5V Logic Supply 150
Kbytes
2-Oct-02 Download
AN-227: Application Note 227 Applications of Wide-Band Buffer Amplifiers 420
Kbytes
20-Nov-08 Download
AN-A: The Monolithic Operational Amplifier: A Tutorial Study 342
Kbytes
4-Nov-95 Download
AN-260: Application Note 260 A 20-Bit (1 ppm) Linear Slope-Integrating A/D Converter 148
Kbytes
3-Oct-02 Download
AN-42: Application Note 42 IC Provides On-Card Regulation for Logic Circuits 409
Kbytes
3-Oct-02 Download
AN-110: Application Note 110 Fast IC Power Transistor with Thermal Protection 333
Kbytes
3-Oct-02 Download
AN-271: Application Note 271 Applying the New CMOS MICRO-DAC 230
Kbytes
4-Oct-04 Download
AN-271 (Japanese): Application Note 271 Applying the New CMOS MICRO-DAC
342 Kbytes   Download
AN-20: Application Note 20 An Applications Guide for Op Amps 290
Kbytes
1-Jun-09 Download

If you have trouble printing or viewing PDF file(s), see Printing Problems.

[Information as of 8-Nov-2009]