Features • Meets EIA standard RS485 for multipoint bus transmission and is compatible with RS-422 • 10 ns driver propagation delays (typical) • Single +5V supply • -7V to +12V bus common mode range permits ±7V ground difference between devices on the bus • Thermal shutdown protection • High impedance to bus with driver in TRI-STATE or with power off, over the entire common mode range allows the unused devices on the bus to be powered down • Combined impedance of a driver output and receiver input is less than one RS485 unit load, allowing up to 32 transceivers on the bus • 70 mV typical receiver hysteresis • Available in SOIC packaging Description The DS3695A and DS3696A are high speed differential TRI-STATE® bus/line transceivers designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to -7V), for multipoint data transmission. In addition they are compatible with requirements of RS-422. The driver and receiver outputs feature TRI-STATE capability. The driver outputs remain in TRI-STATE® over the entire common mode range of +12V to -7V. Bus faults that cause excessive power dissipation within the device trigger a thermal shutdown circuit, which forces the driver outputs into the high impedance state. The DS3696A provides an output pin (TS) which reports the thermal shutdown of the device. TS is an "open collector" pin with an internal 10 k pull-up resistor. This allows the TS outputs of several devices to be wire OR-ed. Both AC and DC specifications are guaranteed over the 0°C to 70°C temperature and 4.75V to 5.25V supply voltage range.

MY BRIEFCASE                                       Click any "Briefcase" icon to add an item

Typical Application click for larger image	Connection Diagram click for larger image

Datasheet

Title		Size	Date	Other Language
	DS3695A/DS3695AT/DS3696A Multipoint RS485/RS422 Transceivers	515 Kbytes	11-Nov-04	日本語

Featured Application Notes

Title		Size	Date	Other Language
	AN-904: Application Note 904 An Introduction to the Differential SCSI Interface	58 Kbytes	5-Oct-98
	AN-1057: Application Note 1057 Ten Ways to Bulletproof RS-485 Interfaces	155 Kbytes	2-Oct-02

More Application Notes

Title		Size	Date	Other Language
	AN-1057: Application Note 1057 Ten Ways to Bulletproof RS-485 Interfaces	155 Kbytes	2-Oct-02
	AN-409: Application Note 409 Transceivers and Repeaters Meeting the EIA RS-485 Interface Standard	320 Kbytes	5-Oct-98
	AN-847: Application Note 847 FAILSAFE Biasing of Differential Buses	89 Kbytes	5-Oct-98	日本語
	AN-904: Application Note 904 An Introduction to the Differential SCSI Interface	58 Kbytes	5-Oct-98
	AN-454: Application Note 454 Automotive Multiplex Wiring	107 Kbytes	5-Oct-98