National Semiconductor | High-performance Analog

 

 DS1487   

Low Power RS-485/1/4 Unit Load Multipoint Transceiver
Click link to Download

Features
  • Meets TIA/EIA RS-485 multipoint standard
  • Allows up to 128 transceivers on the bus (¼ U.L.)
  • Guaranteed full load output voltage (VOD3)
  • Low quiescent current: 200 µA typ
  • -7V to +12V common-mode input voltage range
  • TRI-STATE outputs on driver and receiver
  • AC performance:
  • Driver transition time: 25 ns typ
  • Driver propagation delay: 40 ns typ
  • Driver skew: 1 ns typ
  • Receiver propagation delay: 200 ns typ
  • Receiver skew: 20 ns typ
  • Half-duplex flow through pinout
  • Operates from a single 5V supply
  • Current-limiting and thermal shutdown for driver overload protection
  • Pin and functional compatible with MAX1487
  • Description

    The DS1487 is a low-power transceiver for RS-485 and RS-422 communication. The device contains one driver and one receiver. The drivers slew rate allows for operation up to 2.0 Mbps (see Applications Information section). The transceiver presents ¼ unit loading to the RS-485 bus allowing up to 128 nodes to be connected together without the use of repeaters.

    The transceiver draws 200 µA of supply current when unloaded or fully loaded with the driver disabled and operates from a single +5V supply.

    The driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that places the driver outputs into TRI-STATE (High Impedance state) under fault conditions. The driver guarantees a minimum of 1.5V differential output voltage with maximum loading across the common mode range (VOD3).

    The receiver has a failsafe feature that guarantees a logic-high output if the input is open circuit.

    The DS1487 is available in surface mount and DIP packages.

     

    ParametersValues
    Function Transceiver
    Channels 1 Channels
    Max Data Rate 2 Mbps
    SupplyVoltage 5 Volt
    Process CMOS
    Special Features 1/4 UL
    Temperature Min 0 deg C
    Temperature Max 70 deg C
    JTAG1149.1 No
    Drivers 1
    Receivers 1

    Datasheets
    TitleSizeDateOther
    Language
    DS1487 Low Power RS-485/1/4 Unit Load Multipoint Transceiver137
    Kbytes
    4-Mar-99日本語  

    Part Number(s)
    (NSID)
    Top ViewAvailabilityCurrent Reported StockBudgetary PricingPack
    Size
    DS1487M/NOPB

    DS1487M

    RoHS Status


    SOIC NARROW
    Full production
    Lead Time: 6 weeks

    Samples
    DistributorRegionQty
    ARROWWorldwide475
    AVNET-EMWorldwide281
    DIGI-KEYWorldwide0
    MOUSERWorldwide408
    NEWARKAmericas285
    TAYLORAmericas760
    $0.84 each at 1K+ pcsrail
    of
    95
    DS1487MX/NOPB

    DS1487MX

    RoHS Status


    SOIC NARROW
    Full production
    Lead Time: 6 weeks

     
    DistributorRegionQty
    ARROWWorldwide5000
    DIGI-KEYWorldwide0
    MOUSERWorldwide1000
    TAYLORAmericas5000
    $0.84 each at 1K+ pcsreel
    of
    2500

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS1487N
    MAX1487
    MAXIM
    16 Nov 2008

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS1487.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS1487 is located at RoHS Status.

    Part Number(s)
    (NSID)
    Weight
    (milligrams)
    TypePinsMSL RatingPeak ReflowRoHS
    Status
    CAD SymbolsModelsPackage
    Marking
    Format
    DS1487M/NOPB

    DS1487M
    69.761
    70.001
    SOIC NARROW81
    1
    260
    235
    DetailDownloadN/A
    NSZXTT
    DS148
    7M
    DS1487MX/NOPB

    DS1487MX
    69.761
    70.001
    SOIC NARROW81
    1
    260
    235
    DetailDownloadN/A
    NSZXTT
    DS148
    7M

    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS1487.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS1487 is located at RoHS Status.

    CAD Symbols and Models
    Download DS1487 CAD Symbols
     Models
    N/A


    Reliability Metrics
    Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
    DS1487MLMDMOS0182950026500002751944735
    DS1487MXLMDMOS0182950026500002751944735

    Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

    For more information on Reliability Metrics, please click here.


    All information pertaining to the RoHS Compliance Standard can be found at http://www.national.com/en/packaging/leadfree.html.

    Moisture Sensitivity Level Data for DS1487.

    A RoHS compliance or an IPC 1752 report can be acquired at http://www.national.com/en/packaging/greennopb.html.

    National's certificate of product compliance for DS1487 is located at RoHS Status.

    Obsolete Versions
    Obsolete PartAlternate Part or SupplierSourceLast Time Buy Date
    DS1487N
    MAX1487
    MAXIM
    16 Nov 2008

    [Information as of 9-Feb-2012]